Hello my name is tim lost my sound on my desk top needs reconfiguration reset up the hole sytem needs work ok

Try typing http://mywifiext.net/IA_frame.htm in your browser. This should bring up the start screen for your device. From there you can go through the setup wizard. If that doesn't work, you may need to run through the reset procedures for the device and then try. If that still doesn't work, turn off wireless on your computer and run a network cable directly into the extender from your computer and try again.

how was the name reset and by who??????
if you mean you have to reset your router to the factory default settings
(note all settings will be lost you will need to reconfigure the router)
you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, depending on your router) to reconfigure your router settings or if there is a small hole in the front or back of the router push a hair pin in to reset to factory settings

Find the small hole in the back of the cabinet. Unplug the device. Insert something that will fit ... of course ... gently press and hold the small button inside for at least 30 seconds. Following this, plug in the device. Now you have no user name and the password is "admin". The address will be 192.168.1.1.

Ok?

Good luck ...

If this doesn't get you going, your device may require replacement. All in all, not really the end of the world of you have to replace it.

Thanks for your question @ FixYa.com

Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.if there is a small hole in the front or back of the router push a hair pin in to reset to factory settings
hope this helps

Unfortunately, there is no way to recover a lost or forgotten password from a router or access point; you will need to reset the device to factory defaults. However, once the device is reset to factory defaults, you can use the default username ("admin") and password (either "password" or "1234" depending on your router) to reconfigure your router settings.

or

if there is a small hole in the front or back of the router push a hair pin in to reset to factory settings

hope this helps

Hi Friend, In order to reset the router, you will find a small pin point hole on the back of the router. Take a paper clip or a pen and press and hold the red color reset button in that hole for 30 seconds and the router will be reset.
NOTE: Resetting the router, all the settings on the router that has been made for the LAN and the wireless will be lost and the router needs to be reconfigured.

Take a Norwegian paper-clip and straighten one end.
Turn the router off.
Push that end into the small hole in the back of the router, until you feel resistance.
Push another small distance, against the resistance, and hold it in for 30 seconds.
Turn the router on.
It should now be reset to its "factory" settings, including default ID/password.
Access the router, and reconfigure its wireless interface.
Update the wireless settings on the XBOX.

You need to reconfigure the Wireless network again on your Netgear Router. Get in touch with your ISP.

You will need to check the settings of the router. You are able to go online when you connect the computer directly to the modem. Your internet service provider is DSL. You can try to reconfigure the router. Press the reset button on the router for 30 seconds. release it. unplug the power to the router. plug it back in. wait for 1 minute and try to reconfigure the router. Click Here for step by step set up

Hi....go to www.phonserv.com and you will find the answers to just about all your questions for this phone....I could send you a copy of mine if you like just send me your email or go to the site yourself and print one...its very handy....