Question about Epson 1000 ICS All-In-One InkJet Printer

Open Question

Epson 1000ICS protection counter reset

Hi, Can you tell me how to reset the protection counter on a Epson 1000ics all in one? I have tried the ssr software but this machine is not supported by it. Thanks. Scott

Posted by on

5 Suggested Answers

gwbm
  • 353 Answers

SOURCE: epson stylus 1400 service utility SSC

The free SSC utility which will reset the waste ink pad protection counter in most Epson inkjet printers can be downloaded from
http://www.ssclg.com/epsone.shtml. Remember though, if you don't change the ink pads, there will be an increasing danger of ink leakage from your printer, particularly if you tip it up for any reason - VERY messy, and it can clog up your printer mechanisms.

Posted on Jan 31, 2009

websnail
  • 419 Answers

SOURCE: reset ink-pad counter on epson stylus photo 1400

Hi,

The simplest way to do this is to grab a copy of the A10_IPR utility that Epson distribute to their customers...

The utility is available to North American customers if you register no this site page http://www.epson.com/ipr/

The utility is also know to be available in the wild if you search for "waste ink ipr".

Just remember to scan any download using a virus and malware scanner before you attempt to use it as some utilities contain trojans or similar nasties.

Hope that helps.

Posted on May 12, 2009

aicaxz
  • 511 Answers

SOURCE: epson stylus photo RX680 error message says;

Yes you're right. Use SSC service utility or RX680 Adjsument program. Find at indoreset.blogspot.com. Don't forget to replace waste ink pad, or just extend outlet pipe of head cleaning mech to outside.

Posted on Aug 28, 2009

  • 1 Answer

SOURCE: waste ink pad counter reset software.

Dear Sir,
My Epson R30 Photo Printer has a problem from Waste Inkpad Full massage and it's not working. I want a free software to download to reset my printer and I tried in SSC Service Utility v4.30 but software don't have R390 model so, please help me to find right software to reset my printer. Thank you.
mallajanak@yahoo.com

Posted on Jan 12, 2010

  • 1 Answer

SOURCE: EPSON STYLUS 4000 MAINTENANCE REQUIRED

While powering up the printer, hold down the three leftmost
arrow buttons:

[left-arrow] [down-arrow] [up-arrow]

You will get a whole different set of menus.

Use the up/down arrow buttons to select the "Clear Counters" menu, then press the [right-arrow] button.

Use the up/down arrows to get to the maintenance tank entry... where you can clear its counter.

Then turn the power off, wait, then turn it on.

You can use this diagnostic startup to clear most of the counters (and their related maintenance codes).

Posted on Mar 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Hi my epson stylus c86 printer, both red lights are flashing as soon as i turn my printer on. please help


Is your printer show any massage? such as : The parts inside part of the printer is end of the service life. If so try to follow these proces:
Jast go to:
download ssc servie utility, and run it in to your computer. Set your install printer and damonestrated printer ( select both are epson c 86) Then close the window. a printer icon will be appair on your icon tray. Right click on the icon. Then protection counter > reset protection counter. Protection counter ( again) > clear counter overflow. Then extra > soft reset.
I think you will relife from your printer problem.
Thank you.

Jun 20, 2011 | Epson Stylus C86 InkJet Printer

Tip

How To Reset Ink Counter On An Epson CX7300, CX8300 or CX9300


You must set the date in your computer to "April 11, 2008" to run Resetter Epson CX7300, Epson CX8300 and Epson CX9300 without error. If do not alter the setting of date of according to rule then software will deleted automatically when running.<br /><br />If you have an error, delete all following entry before you rerun the software.<br /><br />delete registry key: <span style="font-weight: bold;">HKEY_LOCAL_MACHINE\SOFTWARE\EPSON\PTSG</span><br /><br />and delete folder: <span style="font-weight: bold;">C:\adjustment program</span><br /><br />To reset waste ink pad counter Epson CX7300, CX8300 and CX9300F use adjustment program. I have tried this software and this software worked. To run this software without error please follow the instructions above.<br /><br />Here How to use this software:<br /> <ol> <li>Download the adjustment program (see below)</li> <li>Extract the file you have downloaded</li> <li>Go to The extracted folder then click tricks-collections.bat file</li> <li>Now set the date setting in you PC to 11 April 2008,</li> <li>Run adjustment program by click AdjProg.exe file the click accept</li> <li>Click Particular adjustment mode then select destination and printer port then click OK</li> <li>Select Waste ink pad counter from the below window and double-click to execute it</li> <li>Click [Check] button to check current protection counter's value.</li> <li>Then Click [Initialization] to reset the protection counter to the initial value.</li> <li>After finishing, you can change the date back to normal.</li></ol><b><br />Link Adjustment program for Epson CX7300, CX8300 and CX9300F</b> <ul> <li> Adjustment program for epson CX7300: <a href="http://www.mediafire.com/?8wrkugah2mj">http://www.mediafire.com/?8wrkugah2mj</a></li> <li> Adjustment program for epson CX8300: <a href="http://www.mediafire.com/?0xfnrgarvuj">http://www.mediafire.com/?0xfnrgarvuj</a></li> <li> Adjustment program for epson CX9300F: <a href="http://www.mediafire.com/?o020wlaf6te">http://www.mediafire.com/?o020wlaf6te</a></li></ul> <br />

on Mar 09, 2011 | Office Equipment & Supplies

1 Answer

How do I reset waste ink counter?


Hi there you can download this from my website.
Main features.
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
Download Free
Click Link = http://www.4all2sell.com/reset-tools/sscserve.exe
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks
All files on my website are only there for a limited time


Mar 16, 2010 | Epson Stylus C42UX InkJet Printer

2 Answers

Both the red and green light are on and blinking.What is wrong with my Epson C60?


kiryakitsa1 You should download the SSC Service Utility as pineworks says. Read the instructions and warnings. Go to Reset counter protection and press reset. You may recieve a warning about replacing your waste ink pads. I have always reset the protection counter without replacing the waste ink pads and I have never had a problem. If you see ink drainage then you should replace the waste ink pads and then reset the protection counter. I have never had a problem with ink heads and I have done this many times.

Feb 07, 2010 | Epson Stylus C60 InkJet Printer

2 Answers

T11 Counter Reset


SSCLG can not counter reset the new T Series printers... please check

http://inksystem.vacqum.com

There is an adjustment program for T11 you can download..
follow the readme file and you are good to go

Sep 11, 2009 | Epson Office Equipment & Supplies

2 Answers

Printer won't printer as message says parts are


Part are end life cycle : waste ink pad full. Need to reset waste ink counter. SSc ver 4.3 support RX 620 and 640. U can try using printer model RX 640. Menu Protection Counter, Show current value for checking. Reset protection counter. Or Try to find RX630 adjusment at indoreset,blogspot.com. Don't forget to replace or wash the pad. Or extend outlet waste ink pipe to outside.

Jun 28, 2009 | Epson RX620 All-In-One InkJet Photo...

3 Answers

Hi my R1800 has 2 flashing red lights (top) and no power light. What can i do? MAria


Hi.
It could be your ink tray has overflowed.
There is software http://www.ssclg.com/epsone.shtml which might help.

Install this program, set your printer model and the driver (Epson Stylus Photo R1800) when it starts up. Close the program, and it will minimize to the
tray on the taskbar - right click on the icon and goto "Protection Counter". Choose
"Reset Protection Counter". Choose "Yes" to the question about the waste ink pads,
then switch the printer off for 1 minute. This should cure the problem.


It might be worth a try

Jun 15, 2009 | Epson Stylus Photo R1800 InkJet Printer

6 Answers

How to reset waste ink full epson t11


first go to this website download their software http://www.ssclg.com/epsone.shtml. after that install.

second go to counter reset improvements reset counter or go to protection counter to reset counter.try this but i no sure which oen please try this two method to see can or no

Apr 09, 2009 | Office Equipment & Supplies

2 Answers

Reset waste ink in Epson 10600


Hi there you can download this from my website.
Main features.
SSC Service Utility allow you to do many amazing things with Your Epson printer :
1) Work directly with CSIC in Epson Stylus printers cartridges.
2) Reset or rewrite any chip using special addon device.
3) Freeze internal ink counters.
4) Reset internal ink counters even with empty cartridges.
5) Separate cleaning of color and black heads for all Epson inkjet printers, powerful cleaning mode.
6) Hot swapping of cartridges supported.
7) Resetting of protection counter (even then it is already full).
8) More then 100 different Epson printers supported
This allow many people with high printing demands to save some money (program works with both black and color cartridges).
Up to day this software works under Windows 95/98/ME/2K2/XP with both the LPT and USB printers.
Download Free
Click Link = http://www.4all2sell.com/reset-tools/sscserve.exe
Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks


Nov 13, 2008 | Epson Stylus Pro 10600 InkJet Printer

2 Answers

How to reset my epson stylus dx5050 printer


If your Epson printer needs resetting you can download the latest software Version of the SSC Service Utility (V4.3) from this link.
Install it and run it, click on configuration, select your printer from both lists ('x' is replaced by a number), close the program with the red cross. The program will run in your task bar, click your right mouse button on the icon for a menu. You can use the appropriate utility for your needs, if your printer needs maintenance due to ink pad being full, select Protection Counter and Reset Protection Counter. If your printer has locked out because you ignored the warnings and continued printing, first select Protection Counter and Clear Counter Overflow, then select Extras and Soft Reset, wait 5 minutes, then select Protection Counter and Reset Protection Counter.

Sep 23, 2008 | Office Equipment & Supplies

Not finding what you are looking for?
Epson 1000 ICS All-In-One InkJet Printer Logo

Related Topics:

31 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Office Equipment & Supplies Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Michel Smith

Level 3 Expert

1218 Answers

Are you an Epson Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...