Question about MSI MS-6378X-L Motherboard

2 Answers

I need to know how to hook up the power switch and other

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 45 Answers

Dear thepromises1, the picture shows how you connect all sw and led s.
Hope this helps.

i need to know how - 7f03f3d.jpg

Posted on Apr 02, 2009

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 5 Answers

On your PSU, there is a bunch of different cords coming out. Find the one that has 24 pins and then find the corresponding plug on your motherboard. Connecting this should power your board.

Your manual/user guide that came with your motherboard will have diagrams in it that identify each of the connections on your board. It's extremely helpful for setting up your new motherboard.

Good luck!

Posted on Dec 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Power switch


You maybe able to download a motherboard manual from this WEB site and identify the connectors for the front panel.
http://devxstudis.org/int/intel+d865gkd+motherboard+manual.html

Jan 03, 2013 | IBM Computers & Internet

1 Answer

Trying to install power seats in a 550 where they didn't have any before. Need to know how and where to hook power.


i would hook up power at the ignition switch to a ignition wire or a grey constant power wire however I would reccomend putting a fuse in it too.

Dec 27, 2010 | Ford F-450 Cars & Trucks

1 Answer

I need to know which colour wires are the power supply on a nissan almera 1999 ambition radio harness


Normally,orange needs to be hooked to a constant 12V source straight from the battery(called constant).This will keep your presets and time running when the car is off,which is also normal.Red is hooked to a wire which gets it's power from the ignition being on,also called switched power.
Good luck,Greg

Nov 03, 2010 | Car Audio & Video

1 Answer

Gateway computer 310 series wont power up when


It sounds to me like the power switch is plugged into the motherboard incorrectly. I would need to know the type of motherboard you have to get you the proper schematic for hooking up the power switch and reset switch to the board. If you have the manual to the motherboard, there should be a detailed picture showing you how it is to be hooked up. Please let me know the motherboard model for further assistance.

Good Luck,

NOLA Tech

Jan 29, 2010 | Gateway 310 S PC Desktop

1 Answer

Need to know how the wires go on a kobalt 230 volt air copressor


When looking at the switch it self, There will be 4 contacts. On the switch 2 will be labeled Line (Power in) and 2 will be labeled Motor (power out to motor) . Hook the black and white wires from the power cord to the line side (Either contact, it does not matter). Hook the 2 black and white wires from the motor to the contacts labeled Motor on the switch. The remaining 2 green wires (one from the motor and one from the cord) are to be grounded to the case on the switch.

Oct 01, 2009 | Coleman Powermate 60 Gallon Air Compressor

1 Answer

On the combination Two Switches #5224 do I break


No need to break the tab... that' on the power IN side of the switch..
You only need one power in (in most cases).
The power outs are separated already.. one goes to your first load and the other will go to the second.
The white wires are your common and are hooked together with the other whites in the box... don't hook them to the switch.
Hope this get's ya all connected... let me know if you need more assistance.
K

Jun 18, 2009 | Leviton Electrical Supplies

1 Answer

I need to hook the power switch & led lights on the motherboard.


I would like to help you very much, but I cannot manufacture fibs, to please, who? Give me the mother board identification and then we may even find you a manual. Thank you for the consideration and the choice for our service...
My name is Constantin (arzconst is my internal nickname with Fixya.com).

Jun 16, 2009 | Computers & Internet

1 Answer

TRYING TO HOOK UP MU POWER BUTTON NEED TO KNOW


Hi there
The front panel connectors are mainly,
  • harddisk activity connector
  • power switch connector
  • reset switch connector
  • power LED connector
  • speakers connector
  • USB connector
Harddisk activity connector
This normally comes red in colour and is labeled as HDD-LED
Power switch connector
This comes green in colour and is labeled as POWER-SW
Reset switch connector
This usually comes grey in colour and is labeled as RST-SW
Power LED connector
This is usually green in colour and is labled as PWR-LED
Speakers connector
This speaker will give different beep sounds during boot to tell the user if there is any errors. It occupies 4 pins, however only 2 is important for the function. Be sure to connect the red coloured cable to the positive polarity and the black to the negative.
front_panel_connectors.jpg Front panel connectors pins on the motherboard
front_panel.jpg Front panel connectors from the casing

Good luck and thanks for using FixYa!!

May 13, 2009 | eMachines T6420 PC Desktop

1 Answer

I need help hooking my mother board up


See here below and let me know if you need more help.




70ddf7e.jpg

Oct 01, 2008 | Intel Desktop Board D845WN Motherboard

1 Answer

How to hook up the front panel switch for a Quicksilver2-cmt motherboard


You first need to know the make and model number of the motherboard. Most mobo's have the make and model printed on the board itself, other times there will be a sticker.

locate these and let me know what make and model and i can do my best to provide you with the manual.

Thanks,
Brad Nelson

Feb 21, 2008 | Intel Motherboard

Not finding what you are looking for?
MSI MS-6378X-L Motherboard Logo

Related Topics:

157 people viewed this question

Ask a Question

Usually answered in minutes!

Top MSI Computers & Internet Experts

David
David

Level 3 Expert

778 Answers

Matthew Spark
Matthew Spark

Level 3 Expert

1066 Answers

Terry Hair

Level 3 Expert

4125 Answers

Are you a MSI Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...