Question about Panasonic TX-32PK1 TV

1 Answer

T.v stopped working

Hello The problem i am having is with my 34" Panasonic flat screen t.v. I had turned it off and then about an hour later went to turn it back on. the light would come on and it made the sound like it was going to turn on but it just shut off again and it hasn't turned on since. If u could please help me that would be great

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.


    An expert who has answered 20 questions.


    An expert that hasĀ over 10 points.


    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 81 Answers
Re: t.v stopped working

U have a problem in what is called the sos line which is the B+. check the Horazontal output and see if the 145 volt line comes up to the normal 145V. there is a fuse feeding to the horz. out but if the transister is shorted U will get no power. check the fuse it is a resistor and the transister for a short.

Posted on Jun 11, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

Horizontal line running on my GAO Panasonic

If the white line is in the middle of the screen and runs left to right the problem is in the vertical circuit of the set.

Either a bad part in that area or at the vertical output chip bad solder connections (most with this will react when set banged on side).

Note: leaving set on with only that line on screen will sooner or later burn that mark into the face of the screen--not fixable.

Nov 05, 2012 | Panasonic CT-34WX50 34" TV

1 Answer

I have a Panasonic TV CT-34WX50 every time I change channels

it sounds that have problem in the chroma board ( video board ) a small board that hooked up in the neck of the picture tube. if the color is greenish the cause is dead in red video driver transistor or open resistance. hope this can help good luck.

Jul 26, 2012 | Panasonic CT-34WX50 34" TV

1 Answer

Panasonic 32" GAOO just atarted doing this...Turn

The Panasonic Gaoo sets were top of the line in it's day, the problem you are describing is a vertical deflection issue caused by bad solder joints and a few parts. I recommend a tv technician to fix the set.

Jan 09, 2011 | Panasonic CT-34WX50 34" TV

1 Answer

I dont have a remote for my tv and it wont turn on manually the led light blinks 9 times and stops and starts again what should i do?

The blinking lights are a service code. You should first try to unplug your TV and leave it unplugged for at least 4 hours... then plug it back in again.

If the blinking light is still there and no picture, time to have the TV serviced. Good luck!

Oct 10, 2010 | Panasonic CT-34WX54 34" TV

1 Answer

Black box in middle of screen

enter in menu pressing the action bottom and turn off the close caption.

May 27, 2010 | Panasonic CT-34WX54 34" TV

2 Answers

My 34" Sony WEGA has lost its color.

Unplug,replug the tv an hour later.See what happen.U do this to reset all setting back to factory setting.

Feb 23, 2010 | Sony FD Trinitron WEGA KV-34HS420 34" TV

2 Answers

Panasonic 27'' tube television

There are some components in the vertical deflection circuit area that are failing. An experienced TV service man should be able to troubleshoot and repair this for you. It could take several hours of labour cost.

Jerry G.

Apr 26, 2009 | Panasonic CT-36D12D 36" TV

3 Answers

Panasonic CT-32SL14 flat screen tv stopped working

We played Wii sports and fit for few hours than tv started to flicker and change colors to green and black and white. We shut down Wii and not TV screen doesn't show any picture. The power is there and the sound... but the screen is just blue. Any one experienced anything similar?

May 20, 2008 | Panasonic CT-32SL14 32" TV

1 Answer

Picture on Panasonic tv intermittently becomes striated and bottom half of picture shows on top half of screen

Hello! What you're describing sounds like a vertical deflection problem if it also occurs when you're watching a TV program. This type of trouble is a component failing in the vertical circuit of your set. A loose solder connection could cause this. On the other hand, if it just happens when you run the VCR, your problem could be somewhere in the tape drive mechanism or possibly a bad tape. Things like slipping clutches,bad belts sticking guide rollers are a few things that will cause this in a VCR. You need to have a tech check it for you. Hope this gives you some help. Stargazer

Feb 03, 2007 | Panasonic CT-34WX54 34" TV

1 Answer

Picture and sound go away after 2 minutes

Protection circuit fault kicks in. No vertical Deflection (V STOP),B+ over voltage protection (OVP), This is about a $150 -$200 to fix.

Nov 04, 2006 | Sony FD Trinitron WEGA KV-34HS420 34" TV

Not finding what you are looking for?
Panasonic TX-32PK1 TV Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Standard (CRT) Televisions Experts

The Knight
The Knight

Level 3 Expert

66637 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1187 Answers

Are you a Panasonic Standard (CRT) Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides