Question about GE 25932 Cordless Phone

2 Answers

No Dial Tone 1 Handset

Registered all three handsets, one has no dialtone. Model 25942ee3-c No owners manual. Any suggestions?

Posted by on

  • 4 more comments 
  • Anonymous Jan 01, 2009

    no dial tone in hand set tried the rest answer still no dial tone

  • cdn88 Jan 01, 2009

    i tried resetting the phone to the main charger still no luck

  • Anonymous Jan 23, 2009

    No dial tome in any of the handsets

  • pekarek Feb 05, 2009

    NO OWNERS MANUAL, WHERE CAN I GET ONE FOR A GE 25942EE3-C

  • Anonymous Mar 29, 2009

    THANK YOU! IT WORKED!

  • jaltieri Mar 31, 2009

    No dial tone 2 handsets

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hope this helps



http://www.home-electronics.net/ge/pc/IB/25942GE3_IB.pdf

Posted on Feb 23, 2009

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

I think I have the same phone. You have to put the handset with no dialtone in the main charger for about 30 seconds to reset it to the base.

Posted on Dec 25, 2008

  • EelKat
    EelKat Feb 11, 2011

    mine has 2 headsets, no dial-tone on either - placing it in the main charger does not fix the problem :(

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you register a old uniden SSE27 handset to a new Uniden SSE37 base


The following is taken directly from the SSE37 owners' manual:

Registering a handset
If you see a "not registered" message on a handset,
you must register it to a base before using it.
1.
On the base, open the menu and select
Register Accy.
2.
On the handset, press and hold #/DND
until the handset display says
Handset Registering (about 2 seconds).
3.
Wait until the handset display says
Registration Complete (about 30 seconds),
then pick up the handset.
If you don't hear a dial tone or the display says
Registration Failed, charge the battery completely,
then try again.


Good luck!

Feb 19, 2015 | Uniden Phones

1 Answer

I cant dial out it says register HS i am not familiar with the procedure.


When you reset a handset (or if you buy a new one1, that handset displays a Handset Not Registered message. If you see this message on a handset, you need to register it to a base before you can use it.
Registering a handset
Does the handset fit in the base cradle?
Yes
No
Place the handset in the base.
The display should say Handset Registering.
1. On the base, open the menu and select Register Handset. The display should say Handset Registering.
2. On the handset you want to register, press and hold # until the handset display says Handset Registering (about 2 seconds).
In about 30 seconds, the handset display should say Registration Complete. Press TALK ( )/FLASh and make sure you get a dial tone. page29image32024
27
If...
Try...
- you don't hear a dial tone- the display says Registration Failed
Making sure the handset is fully charged, then start over at step 1.
To register a handset to a different base, see the section "Expanding Your phone" in the user's guide for the other base.

Mar 18, 2014 | Uniden DECT 6.0 Cordless Phone ID

1 Answer

I have registered a (different make) GAP compatible phone with my base station and can get a dial tone but no other functions ie address book. Any suggestions?


Yes, buy the correct one and follow the instructions in the manual. We are unable to give advice when you won't say the make and model of your base station or the (Different make) handset. I mean, does your new handset even have an address book function? Does your base station have an address book function?

Oct 13, 2013 | Phones

1 Answer

My Uniden 1560-3 has out of range on all handsets but one. I only have a dial tone on one handset. Please advise how I can correct this problem


Reset the hand sets that are out of range by doing the following:

1) Press and hold END and # for at least five seconds.
2) Move the cursor to select Base Unavailable and then press Menu/Select.
3) Select the base which you want to de-register from, and then press Menu/Select. Base Unavailable appears.
4) Move the cursor to select Yes, and then press Menu/Select. You hear a confirmation tone,

(For DCX150 handsets)
5) Place the handset in the base cradle for about thirty seconds. Handset Registering will appear in the LCD.
6) When the handset has registered to the base, the LCD will display Registration complete then show the handset
ID number.
If the display shows Registration failed, repeat the process again.

(For DCX200 or DCX300 handsets)
5)Disconnect the base AC adapter. Then press and hold find while you reconnect the adapter. Keep holding
find until the charge LED starts to blink.
6)When charged, registered handsets display a handset ID number. Handsets that have not been registered display:
7) On the handset, press and hold # until the handset beeps and displays Handset Registering.
8) When the handset has registered to the base, the LCD will display Registration complete then show the handset
ID number.
If the display shows Registration failed, repeat the process again.



User Manual Available Here

Jun 16, 2011 | Uniden Cordless Phone

1 Answer

How do i program your 20200-1 hand set telephone. it has 13 number memory. that i wold like to program?


To program one of the three emergency buttons:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) press one of the three emergency buttons
6) replace the handset in the cradle
To use; lift handset and press an emergency button, the phone dials the number stored for that button

To program one of the ten memory locations:
1) lift the handset and wait for dialtone
2) press the STORE button
3) dial the phone number
4) press the STORE button
5) dial a one digit number(0-9) to store the number in that location
6) replace the handset in the cradle
To use: lift the handset, press the MEMORY button, dial the memory location digit(0-9), the phone dials the number stored in that memory location


Here is a link to download the manual.
http://www.retrevo.com/search/v2/jsp/mytrevo/myTrevo.jsp?page=man

Feb 11, 2011 | Phones

1 Answer

No dial tone in Clarity C4230 setup


if you can get dial tone with another phone, look into manual for any instructions, usually a toll free number for help. ( BEST ) otherwise take phone back for exchange. may be problem in the board.

Apr 16, 2009 | Clarity C4230 Cordless Phone

2 Answers

Need help registering the GE additional cordless model 27911.


I had the same problem but I fixed it by:

1. Disconnect the battery on the handset.
2. Wait 1 minute and reconnect.
3. Register handset.

Jan 10, 2009 | Uniden Cordless Phone

1 Answer

No dial tone unless on speaker


Suggest you check battery in non working handset is connected and charged. If this is ok, suggest you check this handset is registered with the base station, as out of the box they arent always set to the same channels

Jan 25, 2008 | Phones

1 Answer

Handset ?No Link To Base? error and no dial tone


2/29 Have you registered or re-registered the handset?
"No link" can mean handset is not accepting radio wave of base unit. At Mfgr website pull-down operator's manual and look for registration instructions. Some sequence of buttons will create a radio signal from base (have handset off base) then another sequence of buttons on handset will accept radio signal. If handset has "menu" button, try "menu", then "00" (zero zero) then select an accept or "OK" button. Good luck.

Jan 14, 2007 | Xact Communication XG2200 Cordless Phone

4 Answers

BT Freestyle 2200 I am having problems obtaining a dialing tone on both of my handsets. When I press the green button for a line out it just beeps 3 times and cuts off. There is charge in both the...


hi just want to help others as desciption aint complete above

Registering a BT Freestyle 2200 handset
1. If there is a handset in the base remove it whilst you are registering the new handset.
2. Press and hold the PAGE button on the base for about 10 seconds until you hear a beep and the In Use light starts flashing.
3. On the handset to be registered, press and hold redial & CALLSd buttons together until display shows 65-.
4. Enter the base number. If this is a new handset then the base number is 1, the display shows 65-1 then PIN. which is normally 0000
5. Enter and registration starts. When the handset beeps and returns to standby registration is complete.

Nov 08, 2006 | British Telecom Freestyle 2200 Trio...

Not finding what you are looking for?
GE 25932 Cordless Phone Logo

Related Topics:

478 people viewed this question

Ask a Question

Usually answered in minutes!

Top GE Phones Experts

kakima

Level 3 Expert

96467 Answers

Cindy Wells

Level 3 Expert

4756 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a GE Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...