Question about Watches

Open Question

Need new clasp for diesel DZ 1080 watch for son

Czase # DZ 1080 250601

Number on clasp 251500

Is there someone in or near Boston who could replace the clasp?
Thank you so much!

Posted by on

5 Suggested Answers

  • 1 Answer

SOURCE: instruction manual required for diesel watch DZ 7033

i have found the solution by visiting this site
http://store.dieseltimeframes.com/text/content/diesel/DieselENGLISH.pdf

All diesel watches manual instructions or (guide)

jamil soomro
toronto

Posted on Mar 12, 2008

  • 1 Answer

SOURCE: How to set time on Diesel DZ 7071 Watch

Finally i found it...
I had the same problem and when i was clicking (holding) the upper left button (A) the only thing that was appearing was the offset and i had the only option to increase or decrease the hours!
The problem IS that, in order to set the time, you must have the T1 (Time 1) enable and NOT the T2 (Time 2).
How to change between T1 and T2, click and hold the upper right button (C).
When you finally are on T1, click and hold the upper left button (A) and you are set to go!
Click the lower left button (B) to scroll through various functions!
I hope this is the best solution for you!!
Enjoy it

Posted on May 01, 2008

  • 1 Answer

SOURCE: user manual for Diesel watch

This link has all the instructions for all the diesel watch movements

http://store.dieseltimeframes.com/text/content/diesel/DieselENGLISH.pdf

Posted on Mar 27, 2009

  • 1 Answer

SOURCE: Instruction Manual for DZ-7087

hey..i found out how to set the time for the model: diesel dz7087..
all u have to do is press and hold the light button..the when it starts ticking press the mode button repeatedly to set the time,date,etc...when u finished setting everything press the light button and everything will be set..
ciao ciao

Posted on Feb 04, 2010

escapement
  • 2334 Answers

SOURCE: I need a user manual for my wrist watch Diesel

Click on my profile (escapement), then click on Tips and Tricks. There you will find link to all DIESEL watch manuals. Rate me, please .

Posted on Apr 09, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you take the links off to make it smaller?


Tiny screws in some of the links near the clasp usually. When you unscrew it with a jewellers screwdriver and the whole pin comes out and the link drops away.

If not, the adjustment is on the clasp itself by moving the final link further into the clasp cover. Press the tip if the spindle with the point of a knife or a pin. They are spring loaded in the centre.

Oct 18, 2015 | Watches

5 Answers

Kennith cole reaction watch


try to change your settings of your clock by getting it full circle to get back to real time and see what happens. if still problem persist then you might send it to repair service or it should have warranty service for an expensive watch. hope that helps!


CHARCOIS

Oct 01, 2008 | Watches

1 Answer

Clasp for Tag Heuer aquamarine watch BA0751


Once you have the part number you can search ebay and if lucky you will find the clasp there.

Jan 22, 2013 | Tag Heuer cj1110.ba0576 Wristwatch

1 Answer

HOW OPEN INVICTA WATCH CLASP


Look at this video

https://www.youtube.com/watch?v=dkAoxVYtjXQ

you'll see the clasp as it look s when open. You need to hold the strap and clasp near one side of the 'join' while pulling the upper part of the strap away from the clasp on the other side.

Jan 11, 2012 | Invicta Square Angel Diamond Stainless...

1 Answer

Where can I get a new band for my KS4003 Kenneth Cole watch? The clasp won't open and I didn't want to pay $65 just for a new clasp. How much is the band?


Thank you for contacting FixYa,
You can contact Kenneth Cole for a replacement band but I am afraid the band is probably going to be alot more then the $65 for the clasp. I would honestly just replace the clasp unless the band is worn in which case I would do the band.
Sorry.
KC can be reached at 1-800-KEN-COLE

Oct 02, 2010 | Kenneth Cole Watches

2 Answers

I have a women's kc1239 wrist watch. I've brought it to my jewelers to fix the pins near the clasp, but noticed the 2nd pin down from the watch face was broken, too. My jeweler said they cannot fix this...


I am sorry but u are going to need to replace the watch band, the jeweler is correct, did he suggest the correct replacement band, he should have a selection of bands that will work with this watch.

Dec 07, 2009 | Kenneth Cole KC1239 Wrist Watch

2 Answers

The folding deployment clasp on the bracelet/strap for my Tag 1000 series ladies watch has broken. Might a replacement clasp from any of the current tag models fit?


The newer straps on TAG are generally wider than the professional series and the cost of a new genuine TAG heuer clasp or bracelet may easily exceed the costof buying an entire watch of that series used.
I recommend searching for an after-market strap/ buckle usuing your case back numbers as the search criteria.

Oct 17, 2009 | Watches

1 Answer

How do you remove the pin out of Starck and Fossil PH1100 watch?


Ok, so if you are like me then you probably thought removing the three tiny screws from either side of the strap, and cutting segments of the strap and re-screwing the clasps back was going to do it. Unfortunately one realises that the clasps do not slacken to let the rubber straps out even after the screws are off. The critical point is to get the side pins out which is no simple feat. Getting the pins out releases the clasps and the rubber strap.
To get the pins out, use a wire cutter to cut down a paper clip to a length of 1 .5 cms or so. Hold this with a pair of tweezers along the axis of the pins while you hammer down in the direction of the small arrow inscribed on the metal clasp. With persistence a part of the pin comes out from the other end and you can then pull it out completely with a pair of pliers.
Removing the two pins with release the ends of the rubber straps. cut away segments as required while trying on so that you dont cut too many. Make sure you cut the same number of segments on each side. I had to cut three from each side since I have very thin wrists.
Now put the rubber strap back hold the clasps in position and push the pin back in place. Put the screws back and you should be in business.
It sounds complicated but is quite simple if someone shows you how....which I hope I have been able to.
Sudipto, India

Sep 09, 2009 | Watches

Not finding what you are looking for?
Watches Logo

Related Topics:

83 people viewed this question

Ask a Question

Usually answered in minutes!

Top Watches Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18331 Answers

Jimmy Accardi

Level 2 Expert

98 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Watch Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...