Question about Kenmore Refrigerators

Open Question

Kenmore refrig does not work is there a reset button ???

Kenmore Refrig light is on but refrig not working--It is in the garage
13 monthes old---Is there a reset button or could it be compressor.

Posted by on

6 Suggested Answers

zr800o1le
  • 18 Answers

SOURCE: Refrig/Freezer not cooling

"compressor not functioning". You Probably need a New Compressor. I have a Family Member whos Refrig/Freezer Compressor had to be replaced under Warranty when it was only 2 years Old.

Posted on May 12, 2009

zr800o1le
  • 18 Answers

SOURCE: Cleaned coils,lower fan, drain lines. Checked door seals, temperature reset, both fans are runnign but

Need a New Compressor. That is the only way of Cooling. If it was working and not cooling it could be the Condensor or low on Freon.

Posted on May 12, 2009

  • 9 Answers

SOURCE: side by side, freezer hot, refrig. hot

PURCHASE Troubleshoot refrigerators video at https://www.applianceuniversity.com/store/products/Secrets-of-T%7B47%7DS-Refrigerators-%231009.html

Posted on May 25, 2009

  • 1 Answer

SOURCE: kenmore coldspot refrig compressor not running

I just went thru this a white relay on the compressor is bad $ 60 at local parts store

Posted on Jun 14, 2009

  • 1 Answer

SOURCE: Code on door says er dH on Kenmore elite refrig

This error code has something to do with a defrost sensor and happened after an extended power outage. I unplugged the refrig and it reset itself!

Posted on Jul 18, 2009

blueextc3221
  • 15935 Answers

SOURCE: I have a Kenmore model 795 77563600 refrig side

This is an error code for the icemaker fan motor.
If the control does not see a signal coming back from the fan motor you will get this error code.
Please see the image below from the service manual that explains the ER IF error code.

http://media.fotki.com/1_p,wkbwtkdqbqkgrkkxgtqsskgwtqkq,vi/ktfgsrbbdxktrrwffdr/1/1303472/5961857/image18067img-or.jpg

The ER IF code indicates a failure of the icing fan.

You may notice slower ice production but the other fans should be okay.

You can select the ultra ice option and see if the fan toggles on.

The fan or the control is bad.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question.

Posted on Sep 23, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Kenmore Refrig Model 596.50699000, not getting cold as should. Frost forming on top row of coils only?????


Clean the condenser. Probably below refrig. Reset all settings to mid point and check to see if you have a restricted drain tube.

Jun 17, 2012 | Kenmore Side by Side Refrigerator

1 Answer

Kenmore refrig/freezer. freezer side is cold,


Check your condenser coil (should be below the refrig.). If dirty, you can clean it with a condenser brush from Home Depot or Lowe's. Turn the appliance off while cleaning. Be careful not to damage the refrigerant tubing (copper). If this doesn't solve the problem, then there may be an issue with the defrost thermostat, defrost heater(s) or the main temperature control assembly.

Contact an appliance service company.

Feb 17, 2010 | Kenmore Refrigerators

1 Answer

Refrig will not syay cold Only 6 months old


Good day,
Not your problem. The machine carries a full one year warranty on all parts.
Call Sears for a warranty service call.

Feb 05, 2010 | Kenmore Refrigerators

1 Answer

Kenmore refrig mod # 507920. Icemaker working


check to see if the hose going into icemaker is frozen. unclog it

Aug 24, 2009 | Refrigerators

1 Answer

Code on door says er dH on Kenmore elite refrig


This error code has something to do with a defrost sensor and happened after an extended power outage. I unplugged the refrig and it reset itself!

Jul 17, 2009 | Kenmore Elite 22.4 cu. ft. Bottom Freezer...

1 Answer

Refrig shut off and will not restart - light bulbs still working


this refrigerator sounds like a 'frost free' type, and as such can, usually, only be repaired by the manufacturer. local refrigeration engineers cannot get the parts. your fault sounds like a PCB (printed circuit board) has gone, which only the manufacturers have in stock.

Jan 25, 2009 | Kenmore 55612 / 55614 / 5561 / 655619 Side...

Not finding what you are looking for?
Refrigerators Logo

Related Topics:

263 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Refrigerators Experts

Fred Sops

Level 2 Expert

271 Answers

John Tripp
John Tripp

Level 3 Expert

4636 Answers

mike cooper

Level 3 Expert

864 Answers

Are you a Kenmore Refrigerator Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...