Question about Foxconn 975X7AB-8EKRS2H Motherboard
Hi Binny2, this sounds like a power issue & not a possible graphics card issue.
You can try a couple of things.
Use only one DIMM of memory, not both at first. Try booting system, check for display & POST beep………. No?
Clear your cmos, see page 23 in manual.
Next, see page 17 in your manual for, 8-pin ATX_12V Power Connector for CPU: "PWR2".
(Also see: “Note” at bottom of page 17). This MB needs both 8-pin ATX 12v connectors, connected. It is not recommended to drop down to a 4-pin 12v connection as shown on page 17.
You may need one or two of these power connectors:
Good luck Binny2!
Still no system beep?
Let me know. What size is your current power supply wattage?
Posted on Dec 24, 2008
Tips for a great answer:
May 06, 2012 | Foxconn P9657AA-8EKRS2H (6938279104065)...
But you can use the graphic card as long it is PCI-E.
Aug 31, 2011 | HP Compaq Motherboard
Dec 23, 2009 | Motherboards
Oct 20, 2009 | Asrock P4I45GV R5 Motherboard
Jul 15, 2009 | Foxconn NF4K8AC-RS-1.0 Motherboard
Feb 09, 2009 | Gigabyte Matx Intel G31 775 DDR2-800...
Jul 20, 2008 | Intel D845GVSR Motherboard
Feb 29, 2008 | ASUS P5RD1-VM Motherboard
133 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: