Question about Panasonic KX-TA62470-2 (KXTA624702) Expansion Module

Open Question

Dial 0 for Operator

We have the KX-TA624 system in our office. The problem we have is this... when someone dials 0 at any time it accurately transfers to extension 101 as it is supposed to. However, since I am unable to set up the system for that extension (0), it will tell them the line is busy and hang up without allowing the person to leave a message. How can I set up extension 0 to accept messages for calls?

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Ad
cnavarro
  • 2460 Answers

SOURCE: Digital panasonic kx-t7633

The 7633 has a FWD/DND button. Is it blinking, lit solid or dark? It's designed to be pressed 3 times for FWD DND or OFF....It's programmed as follows, assuming that 500 is your voice mail access code:

From the intercom dial *7101. That sets DND. Dial 710x 500 # to set call forwarding where x-2 for all calls 3 for BUSY for for NO ANS 5 for BSY/NA. 7&8 are FOLOW ME commands and they have a different set of instructions ie Dial *7107 plus your extension to have calls come to the phone you're at and *7108 plus your extension to cancel it. I have never seen it used. *7100 cancels all forward and DND arrangements from your phone..

This is just hte command set for ALL CALLS. You can also set up forwarding for Outside Calls and Inside calls seperately and you can program buttons to do the forwarding.

Your Panasonic dealer has 2 manuals that you would find interesting, one is the TDA Operating Manual and the PTPM Manual. The operating manual has a complete set of programming instructions for the manager and users of TDA systems, the PTPM has a complete set of programming features that can be performed from a Panasonic 76XX display phone.

THe pdf's aren't huge and they can be sent to your email address if you provide one under the Ask Me button.

Carl




Posted on Oct 01, 2008

Ad
  • 514 Answers

SOURCE: Unable to hang up phone. The line is busy/can't make/receive call

sounds like you need a DSL filter, go to page 41 of the manual ("http://service.us.panasonic.com/OPERMANPDF/KXTG1032.pdf" if you don't have it) good luck!

Posted on Feb 22, 2009

sabharish
  • 297 Answers

SOURCE: PBX: KX-TA624 PHONE:KX-7730b. need to forward call to outside lin

Hello, Sorry that We were disconnected from our chat session. 
Here is the manual guide explained with steps for forwardign ur call:

http://service.us.panasonic.com/OPERMANPDF/KXT7720.PDF

Check out the "Page 6" in this manual

Posted on Mar 30, 2009

cnavarro
  • 2460 Answers

SOURCE: Can't find how to set my voicemail message on Panasonic KX-T7431

Thanks for all the helpful information! First of all, I think you have a TVS/TVM voice mail system. That's good, but what does the lady say when you dial 265 or 165 from either your phone or a phone that works?

If you have voice mail set up, the prompt would be to "Enter your password then #" or "You have X new messages" if you don't have your password set. If you don't get ANY of those on your phone, but do on someone else's, you don't have a mailbox.

Mailboxes are added from the System Owner's mailbox (999) by
option 6 then 1. Once you have a mailbox, you do use option 5 and 3 or 2 or 1 for Name, Password, and Greeting.

Since there is little difference between the models of voice mail, I have attached a TVS-50 manual. The instructions for adding a mailbox start on page 280 (or use the System Manager's Guide tab on the left).

http://public.carl.airpost.net/TVS/TVS-IM.pdf


With any luck, you'll get voicemail too :-)

Carl

Posted on May 14, 2009

  • 38 Answers

SOURCE: KX-T7730 Problem

Try to delete both or reseting to phone settings

Posted on Oct 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Unable to get an outside line / dial tone from my phone (KX-T7735-B) originally erroneously reported as a KX-T7335


If this is VOIP then the problem is with Comcast. The settings need to be set to recognize a two line phone. The long way around this is to find out the equipment they are using for switching from a digital to an analog signal and call the manufacturer for help.

Nov 14, 2013 | Panasonic Kx-ta624 Advanced Hybrid...

1 Answer

I have a Panasonic KX-TA624 I would like to forward calls to a mobile phone is tis possible


as long as you have COS 'class of service' rights you can dial -
*7102 9 (phone number) #
this will forward all your calls

to cancel - dial *7100

Mar 15, 2011 | Panasonic KX-T7633 Corded Phone

1 Answer

Display screen shows "Will return soon" Would like


You need to cancel absent message on your phone. The method depends on which Panasonic phone system your phone is connected to. Following are the methods for three different Panasonic phone systems. Once you cancel absent message, your screen should return to date and time, if not then press * until it does.

KX-TA624 Phone System
Press intercom button, dial 750#, lift handset then return handset to cradle to end.

KX-TA1232 Phone System
Press intercom button, dial 7500, lift hanset then return hansdset to cradle to end.

KX-TDA100 or KX-TDA200 Phone Systems
Press intercom button, dial *7500, lift handset then return handset to cradle to end.

Jan 27, 2011 | Panasonic KX-T7633 Corded Phone

1 Answer

KX-TA308 in Malaysia, I have assigned Ext110 as operatior, when I call from internal using 0, ext.110 rings, but when incoming call pressing 0 for Operator, it is not ringing and it keeps saying that...


There is a second program that assigns digits to "0". You found the one in the phone system, but not the AA/VM. It's probably still trying to dial 101. Make it dial either "0" or 110.

Carl

Dec 28, 2010 | Panasonic KX-TA308 Phone

1 Answer

How do I program the phone to ring on an incoming call? The ringer is on.


The solution will depend on why the phone is not ringing. Do you have a good cable? (Can you get a dial tone and make outgoing phone calls?) If you don't have a dial tone, use another phone to check if the phone is the problem or if the jack is at fault.

Next is the phone forwarding calls or in the "do not disturb" mode.

If the problem is one of the above, which model of the Main Unit do you have, KX-TA624 or KX-TA1232?

If the unit is in the "do not disturb" mode, to cancel: pick up the handset, press Program then 0 followed by # with the TA624. For the other model, press Program followed by 0 . Then hang up the handset. For this the manual says press the FWD/DND button not the Program button. I'd check both.

To cancel Forwarding, except for Follow Me Forwarding, pick up the handset, press FWD/DND and then 0 and # (TA624) or 0 (TA1232) then hang up the handset. To cancel Follow Me Forwarding: pick up the handset, press FWD/DND then 8 followed by the extension number. Then press # for the TA624 and hang up; just hang up the handset for the TA-1232.

I hope this helps.

Cindy Wells

Sep 23, 2010 | Panasonic KX-T7730 Corded Phone

1 Answer

How do I reset time and date


Which system do you have? Below are the Panasonic systems. Be sure you find yours.......


Panasonic XDP 824/1232
All programming is done at ext. 101
1) Press the program button, followed by *#1234
2) Dial 000, then follow the prompts on the LCD
KX-T308, KX-T616
  1. Use phone with intercom number 11. It will change the time for all phones.
  2. Keep handset down and press INTERCOM button.
  3. Dial 77.
  4. Dial the hour, with two digits (e.g. 03 for 3 o'clock).
  5. Dial the minutes, with two digits (e.g. 07 if it is now 7 minutes after the hour).
  6. Dial 0 for AM or 1 for PM.
  7. Press #.
  8. Press SP-PHONE
Panasonic KXT Series Telephone System
Setting the time must be completed from an LCD Display phone at Extension 11, using the telephone keypad. This system type requires "Easa-phone" series or a 7000 series model telephone (the model number is listed on the bottom of the phone) that has one or more small switches located at the rear of the phone. Digital "XDP" phones can not be used on this system type!
To set the time:
  • Lift the handset or press "SP-Phone" button on Extension 11.
  • Dial "77"
  • Enter the hour with 2 digits. (01 through 12)
  • Enter the minute with 2 digits. (00 through 59)
  • Dial (0) for AM or (1) for PM.
  • Press the "#"
  • Wait for confirmation tone. (Instantly after pressing the # button, new time counting will start).
KX-TA624
  1. Use phone with intercom number 101. It will change the time for all phones.
  2. Move MEMORY switch on rear from SET to PROGRAM.
  3. Dial *#1234
  4. Dial 000
  5. Press NEXT ("Sp-phone")
  6. Press Right Arrow ("FWD/DND") four times until you see the time displayed
  7. Change the hour with the keypad
  8. Press Right Arrow ("FWD/DND") to reach the minutes field
  9. Change minutes with the keypad, if necessary
  10. Press AUTO DIAL/STORE
  11. Press HOLD
  12. Move MEMORY switch on rear from PROGRAM to SET.



KX-TAW848
  1. Use phone with intercom number 101. It will change the time for all phones.
  2. Press PROGRAM (or PAUSE, if you don't have a PROGRAM button.)
  3. Dial programming access code (probably *#1234)
  4. Press NEXT (SP-PHONE, if you are not using the programming template).
  5. You'll see "Date & Time Set" on your phone's display
  6. Press STORE
  7. Press NEXT to see hours and minutes.
  8. Use your keypad to change the hour
  9. Press STORE.
  10. Press HOLD.
  11. Press PROGRAM
KX-T123211D
  1. Use phone with intercom number 101 (probably the receptionist's phone). It will change the time for all phones.
  2. Move MEMORY switch on back of that phone to PROGRAM.
  3. Keep handset down and press 0 on touch-tone dial.
  4. Dial year with two digits (e.g. 97 for 1997).
  5. Dial month with two digits (e.g. 01 for January).
  6. Dial date with two digits (e.g. 03 if today is the third day of the month).
  7. Dial day with one digit (1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday, 0 for Sunday).
  8. Dial hour with two digits (i.e. 01 for 1 o'clock).
  9. Dial minutes with two digits (i.e. 07 for 7 minutes).
  10. Dial 0 for AM, or 1 for PM
  11. Press either AUTO DIAL/STORE or AUTO/MEMORY, depending on your phone.
  12. Move MEMORY switch on back of phone to SET.
Panasonic DBS 824, 40, 72 & 96
- From the Attendant's display phone.
  1. Press "On/Off"
  2. Press "Prog"
  3. Press " ##"
  4. Press "FF1 key"
  5. Dial 1#, 2#
  6. Dial the time in 24 hr format.
  7. Press #
  8. Press "On/Off"
- From any display phone in the system.
  1. Press "On/Off"
  2. #98 + Password
  3. Press "Prog"
  4. Press " ##"
  5. Press "FF1 key"
  6. Dial 1#, 2#
  7. Dial the time in 24 hr format.
  8. Press #
  9. Press "On/Off"
Panasonic DBS 576 & 576 HD
From any display phone in the system;
  1. Press On/Off
  2. Press "Prog"
  3. Press " * * "
  4. Dial the " Password"
  5. Press "FF8"
  6. Dial 81001
  7. Dial in new time in 24 hr format.
  8. Press Hold and then "On/Off"

Aug 19, 2010 | Panasonic KX-T7731 Corded Phone

1 Answer

How do you set the time on a panasonic kxt7731 proprietary telephone


Which system. See below. BUT make sure you find your system first....


Panasonic XDP 824/1232
All programming is done at ext. 101
1) Press the program button, followed by *#1234
2) Dial 000, then follow the prompts on the LCD
KX-T308, KX-T616
  1. Use phone with intercom number 11. It will change the time for all phones.
  2. Keep handset down and press INTERCOM button.
  3. Dial 77.
  4. Dial the hour, with two digits (e.g. 03 for 3 o'clock).
  5. Dial the minutes, with two digits (e.g. 07 if it is now 7 minutes after the hour).
  6. Dial 0 for AM or 1 for PM.
  7. Press #.
  8. Press SP-PHONE
Panasonic KXT Series Telephone System
Setting the time must be completed from an LCD Display phone at Extension 11, using the telephone keypad. This system type requires "Easa-phone" series or a 7000 series model telephone (the model number is listed on the bottom of the phone) that has one or more small switches located at the rear of the phone. Digital "XDP" phones can not be used on this system type!
To set the time:
  • Lift the handset or press "SP-Phone" button on Extension 11.
  • Dial "77"
  • Enter the hour with 2 digits. (01 through 12)
  • Enter the minute with 2 digits. (00 through 59)
  • Dial (0) for AM or (1) for PM.
  • Press the "#"
  • Wait for confirmation tone. (Instantly after pressing the # button, new time counting will start).
KX-TA624
  1. Use phone with intercom number 101. It will change the time for all phones.
  2. Move MEMORY switch on rear from SET to PROGRAM.
  3. Dial *#1234
  4. Dial 000
  5. Press NEXT ("Sp-phone")
  6. Press Right Arrow ("FWD/DND") four times until you see the time displayed
  7. Change the hour with the keypad
  8. Press Right Arrow ("FWD/DND") to reach the minutes field
  9. Change minutes with the keypad, if necessary
  10. Press AUTO DIAL/STORE
  11. Press HOLD
  12. Move MEMORY switch on rear from PROGRAM to SET.



KX-TAW848
  1. Use phone with intercom number 101. It will change the time for all phones.
  2. Press PROGRAM (or PAUSE, if you don't have a PROGRAM button.)
  3. Dial programming access code (probably *#1234)
  4. Press NEXT (SP-PHONE, if you are not using the programming template).
  5. You'll see "Date & Time Set" on your phone's display
  6. Press STORE
  7. Press NEXT to see hours and minutes.
  8. Use your keypad to change the hour
  9. Press STORE.
  10. Press HOLD.
  11. Press PROGRAM
KX-T123211D
  1. Use phone with intercom number 101 (probably the receptionist's phone). It will change the time for all phones.
  2. Move MEMORY switch on back of that phone to PROGRAM.
  3. Keep handset down and press 0 on touch-tone dial.
  4. Dial year with two digits (e.g. 97 for 1997).
  5. Dial month with two digits (e.g. 01 for January).
  6. Dial date with two digits (e.g. 03 if today is the third day of the month).
  7. Dial day with one digit (1 for Monday, 2 for Tuesday, 3 for Wednesday, 4 for Thursday, 5 for Friday, 6 for Saturday, 0 for Sunday).
  8. Dial hour with two digits (i.e. 01 for 1 o'clock).
  9. Dial minutes with two digits (i.e. 07 for 7 minutes).
  10. Dial 0 for AM, or 1 for PM
  11. Press either AUTO DIAL/STORE or AUTO/MEMORY, depending on your phone.
  12. Move MEMORY switch on back of phone to SET.
Panasonic DBS 824, 40, 72 & 96
- From the Attendant's display phone.
  1. Press "On/Off"
  2. Press "Prog"
  3. Press " ##"
  4. Press "FF1 key"
  5. Dial 1#, 2#
  6. Dial the time in 24 hr format.
  7. Press #
  8. Press "On/Off"
- From any display phone in the system.
  1. Press "On/Off"
  2. #98 + Password
  3. Press "Prog"
  4. Press " ##"
  5. Press "FF1 key"
  6. Dial 1#, 2#
  7. Dial the time in 24 hr format.
  8. Press #
  9. Press "On/Off"
Panasonic DBS 576 & 576 HD
From any display phone in the system;
  1. Press On/Off
  2. Press "Prog"
  3. Press " * * "
  4. Dial the " Password"
  5. Press "FF8"
  6. Dial 81001
  7. Dial in new time in 24 hr format.
  8. Press Hold and then "On/Off"

Aug 15, 2010 | Panasonic KX-T7731 Corded Phone

1 Answer

I have a panasonic KXT TA624 pbx. my phone line just stopped working. it says "CO not assigned"


From the phone press PROGRAM the button and dial 0 1 or 02 or 03 whatever line it was then STORE

Carl

Jul 04, 2009 | Panasonic KX-T7735 Corded Phone

1 Answer

How do I retrieve messages on the Panasonic KX-T7030 phone?


  • Call into your mailbox (usually by dialing intercom 165)
  • Press 4, and 4 again (for "Incomplete call handling")
    By default, three options are enabled:
    option #1: leave a message
    options #5: call the operator
    option #6: return to top menu
  • Follow the audible prompts to disable options 5 and 6

Here are some other features you may need

  • Make sure your Auto Answer button is lit up, so you can receive intercom announcements, and respond hands-free.
  • Use the Call Forwarding (FWD) to send un-answered calls to another phone or to voicemail
  • Press BGM (or 1 on the touch-tone pad) for background music, if your system is equipped.
  • Use Absent Messages to show text messages on other people's phones when you are away.
  • Use System Call Waiting so your phone will ring even when you're on the phone. Press Intercom and dial 7311 to set it up, or 7310 to cancel.
  • Use Do Not Disturb (DND) when you don't want to receive calls. Press Intercom, press FWD/DND and dial 1 to activate, or 0 to cancel.
  • Press MESSAGE when you call a busy intercom number. This will turn on the MESSAGE light on the other phone, and the other person can tap that button to automatically call you back.
  • If you get a busy signal when you call an intercom number, you can signal the other person by dialing 1 (if that phone is programmed for System Call Waiting (above).
  • Dial 330 to make an announcement to all phones.
  • If you want your phone to automatically select an outside line when you pick up the handset, press PROGRAM, dial 99, dial 12, press STORE, press PROGRAM
  • Feb 12, 2009 | Panasonic KX-T7030 Corded Phone

    1 Answer

    Programming numbers into telephone


    to store a speed dial on the kx-t7730 with the Advanced Hybrid System KX-TA624 you press the following keys

    <pick up the receiver>
    2
    *
    <the number you want to have as speed dial>
    <the number you want to dial>
    <press the square shaped key next to 0 and 9>
    <wait for dial tone to return>
    <hang up>

    To call using the now saved speed dial, press the square shaped key and then the number you have saved to speed dial

    For example

    <pick up receiver> 2*1555555555<square key> <wait for dial tone> <hang up>

    This will mean that when you press the square key and 1, it will dial 555555555

    Oct 03, 2007 | Panasonic KX-T7730 Corded Phone

    Not finding what you are looking for?
    Panasonic KX-TA62470-2 (KXTA624702) Expansion Module Logo

    Related Topics:

    135 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Panasonic Computers & Internet Experts

    Oloyede Monsuru

    Level 3 Expert

    1417 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    micky dee

    Level 3 Expert

    2983 Answers

    Are you a Panasonic Computer and Internet Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...