Question about HP OfficeJet 7310 All-In-One InkJet Printer

1 Answer

Printing blotchy I just changed the cartridge, and it gave me a message when I was done, but now I dont' remember what it said exactly. It was something about it failed the printout. When I printed the test page, it has blues and blacks and grays but no colors. Since then, I put in the color cartridge, but it doesn't offer the opportunity to print the test page again and it still prints one line fine, then the next line only has the top half printed, then it will print two lines fine. I'm a court reporter and am trying to get this transcript to the lawyers this morning. Can you please advise? Thanks. TStephens

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 8 Answers

Reinstall both cartridges again and close housing, if it does not print test page turn off the printer and wait a few seconds and turn it back on.

Posted on Dec 29, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Message on printer


I have exactly the same problem with my photosmart printer, even with genuine HP cartridges... It's not a solution but eventually after repeatedly removing and refitting the same cartridge it gave-in and started-up ok for me!
I seldom use the printer and I would say it would have this problem every other time I use it.

Aug 21, 2012 | HP Photosmart C6280 Printer

1 Answer

I can't figure out how to change the printer cartridge on my hp 2175 p/s/c. The cartridges are not sliding in. Am I missing a latch or something?


Verify that your printer model is HP PSC 2175.

adnanbhatti_8.png


Cartridge replacing is not at all difficult. Just requires some getting used to. I will now redirect you to the official HP support website where you will see how its done exactly. Please click on the link in blue below:

Changing the Print Cartridges in the HP PSC 2175 All-in-One Series

I recommend studying the entire procedure before you attempt to replace the cartridges. In addition to that below are some general points to remember.

Things to keep in mind:

  • The cartridge must be the exact model.
  • Cartridges are keyed meaning they will only go in a certain way and not any other. So make sure you do not apply excess pressure because if you broke something, the printer is practically junk as you cannot find old parts and new ones aren't cheap.
  • Beware of fake cartridges.

Nov 30, 2010 | Computers & Internet

1 Answer

How do I refill ink cartridges for Epson CX8400; RC-694. I bought a refill kit with hypodermic but it contained no instructions on exactly how! Please help.


Hi there
But remember it may need to be reset after or it will still show low or emty.
All printer are the same ways to refill the inks up go to this website it will show you how it done there is a few Videos there for you to see how it done

http://www.youtube.com/watch?v=pnCPB9Clk5c


Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Mar 14, 2010 | Office Equipment & Supplies

1 Answer

Cannot remove paper jam message


Hello there
You may not see a paper jam.

This may work for you, it has worked for many here I given this advice so gave it a try it could work for you. Generally when this happens, something has fallen into the printer, or a piece of paper has been jammed in there.

First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out.

If nothing goes, or you can't hear anything rattling around, get a piece of cardstock paper (60lb or heavier) and gently push this through the printer, to see if it will help push out what might be stuck in there.

And gave the rode that the ink slides on a good clean and maybe a bit oil on cloth and wipe the rod with it.

Please come back and just gave a vote, it will gave me some satisfaction to know am helping some one so I will keep on helping.
All The Best: Pineworks

Feb 28, 2010 | Dell 926 All-In-One InkJet Printer

1 Answer

Dell 942 AIO printer won't recognise black cartridge:


I think you purchased a black cartridge with bad electronics. Basically your cartridge can't communicate with your printer and you should exchange it for a new one. There is no way to "fool" your printer into accepting refills with bad electronics. What you can do is when you get the message that you aren't using genuine cartridges and it won't be able to estimate ink levels is to check the box indicating to ignore the ink levels.

Nov 13, 2009 | Dell 942 All-In-One InkJet Printer

1 Answer

Get message error change cartriges the cartriges are new


All cartridge installation and level reporting is done through the printer itself, not the software. You should ensure the X125 has the cartridges installed in stand alone mode first. To do so, open the lid and remove the cartridges. Then unplug the power cord for one minute. Reinsert the cartridges, connect the power cord and close the lid. When the lid is closed, the display will ask you if "New" or "Old" cartridges were installed. If new, align the cartridges, if asked to do so. If this still presents you with a "Change Cartridge" message or something similar, please try a different cartridge.

Apr 22, 2009 | Lexmark Pro X125 All-In-One InkJet Printer

1 Answer

Big game hunter - blank screen


You should go to the shop where did you buy it!
because if that problem was occured when you buyed it you can have your money back within 14 days and you dont have to explain anything!








Please rate!

Apr 06, 2009 | Cabela's Big Game Hunter for Windows

3 Answers

I changed my color cartridge #97 on my HP officejet 7310


Remove the color cartridge. Make sure the contacts in the print carriage are clean. Chek to ensure the contacts on the cartridge are clean. Reinsert cartridge.

Mar 20, 2009 | HP OfficeJet 7310 All-In-One InkJet...

1 Answer

Hp 920c tech support


check your print cartridge has not plastic strip stuck on bottom side of it.
recoonect all connection then try.

Nov 24, 2008 | HP DeskJet 920c InkJet Printer

Not finding what you are looking for?
HP OfficeJet 7310 All-In-One InkJet Printer Logo

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Office Equipment & Supplies Experts

mukhtar21 shaikh
mukhtar21 shaikh

Level 3 Expert

2022 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18425 Answers

Are you a HP Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...