Question about Acer Aspire 5920-6727 Notebook

2 Answers

Default message when logging on

I have a new computer with windows vista and after logging on, a blackbox comes up that says c:windows/setspk/default.exe. When I went to windows files I find that setspk is there (associated with Realtek) as an application. I have done a recovery and it still turns up. It disappears after blinking on, and it doesn't seem to bother anything, but I don't think it should be doing this. Am I correct. Hi

i am facing the same problem in acer laptop 5920 with vista premium,

i unchecked the option Realtek..... and restarted the laptop, but still the problem persists

please let me know if there is any option to solve this problem

Posted by on

  • defect Dec 31, 2008

    i tried to update the driver,
    but still the problem "c:windows/etspkdefault.exe" persists

×

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 903 Answers

You can try to update the driver for realtek from acers website go to http://support.acer-euro.com/drivers/downloads.html select your model of laptop and download the drivers for realtek. Then go to Control panel, system, device manager and right click realtek, click on update driver and browse to where you saved the download and select the file.

Hopefully this will work

Posted on Dec 23, 2008

  • Debs
    Debs Dec 31, 2008

    this is probably just a start up program tha checks the drivers for realtek before it runs. You can disable start up programs from running (you need to be logged on with administration rights). Go to control panel>windows defender>tools>software explorer and click on the botton tab 'show for all users' (even if there is only one user it will enable to to disable if you click on show for all users) then search for any software relating to realtek. for example the realtek control panel. Then click on it and select 'disable'. This will prevent it from running when the computer starts up. If this does not work or you have disabled more than one thing you can always go back and permit to run again so don't worry.



    If the box still displays when you log on don't worry, these programs normally work without you seeing them, but because you see the box blink does not mean there is anything wrong.



    I hope this helps

×

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

  • Contributor
  • 52 Answers

This is normal, this is a driver loading for your realtek card. Sound I believe. I think what's happening is that it's not being done in the background as it normally would on perhaps an XP system. Also remember that vendor drivers and programs don't always work perfectly with Windows. 
It's nothing to worry about, if your sound is good, then it's doing what it should.
I hope that gives you some ease of mind.
Caid.

Posted on Dec 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

4 Answers

I cant log in because i forgot my password ?


The following ways can help to reset or recover lost windows password in a few steps.

1. Reset windows password with reset disk.
  1. If you enter the wrong password when you attempt to log on, Windows displays a message that the password is incorrect. Click OK to close the message.
  2. Click Reset password, and then insert your password reset disk or USB flash drive.
  3. Follow the steps in the Password Reset wizard to create a new password.
  4. Log on with the new password. If you forget your password again, you can use the same password reset disk. You don't need to make a new one.

2. Reset windows password with a Windows Password Reset software.
Step 1: Download and install Spower Windows Password Reset.
Step 2: Create a CD/DVD or USB password reset boot disk with SWPR.
Step 3: Boot your computer from password reset boot disk.
Step 4: Recover the forgotten password for administrator account.

2_13_2012_1_08_49_am.jpg

Mar 26, 2011 | Toshiba Satellite Pro L300 Notebook

Tip

How to change Windows 7 password?


As the latest operating system launched by Microsoft for only about 1 year, the sale of Windows 7 has surpassed Windows Vista in global market. It attacks increasing attentions and more and more people focus on Windows 7 functions. Here it introduces you how to change Windows 7 password. 3 different and detailed options for your to change Windows 7 password.
Option 1: Change Windows 7 Password Use Ctrl + Alt + Del
  • It is the easiest way to change Windows 7 password by pressing Ctrl +Alt +Del.
  • 1. Press Ctrl + Alt + Del when you are logged onto your Windows 7 PC.
  • 2. Click on Change a password.
  • 3. Type your old password, type your new password, type your new password again to confirm it, and then press Enter.
Option 2: Change Windows 7 Password Use Computer Management
  • This solution to changing Windows 7 password:
  • 1. Right-click Computer to select Manage.
  • 2. In the coming Local Users and Groups screen, double-click Local Users and Groups, and then click Users.
  • 3. Right-click the account that you need to reset the password for, and then click Set Password.
  • 4. Type and confirm the new password.
  • Note: you can also go to Local Users and Groups screen by clicking Start button and inputting lusrmgr.msc into the Search box.
Option 3: Change Windows 7 Password Use Password Reset Disk Windows 7 allows you to create a password reset disk to change Windows 7 password in case that you are locked out of computer. When you forgot Windows 7 password, please plug your password reset disk in computer, and then follow the below steps to change Windows 7 password.
  • 1. Log on your computer with the target Windows account.
  • 2. Enter a wrong password in the welcome screen password box, and hit Enter.
  • 3. Click OK when the message that the user name or password is incorrect comes up.
  • 4. Click on Reset password on the following screen.
  • 5. Click Next when password reset wizard welcome screen appears.
  • 6. Select the target password reset disk and enter Next.
  • 7. Enter and confirm your new Windows password and click Next.
  • 8. Click Finish to close the wizard.
  • 9. Log on Windows 7 with the newly reset password.
Whether to use Ctrl + Alt + Del or use computer management to change Windows 7 password, it is only available when you can log on Window 7 machine with an account with administrator privileges. If you forget all administrator account passwords, you can turn to Windows password reset disk to change the lost Windows password. A windows 7 password reset disk can really save you a lot of trouble when you forgot Windows password and locked out of computer.
If you forget to create Windows 7 password reset disk, you can try Windows Password Recovery Professional. This safe and reliable Windows password recovery software allows you to burn a bootable CD/DVD or USB flash drive to rest lost passwords for Windows 7/Vista/XP/NT and Windows Server 2008/2005/2000. You can log on your computer again within 5 minutes with this tool.

on Dec 10, 2010 | Computers & Internet

Tip

How to Change Windows 7 Password?


As the latest operating system launched by Microsoft for only about 1 year, the sale of Windows 7 has surpassed Windows Vista in global market. It attacks increasing attentions and more and more people focus on Windows 7 functions. Here it introduces you how to change Windows 7 password. 3 different and detailed options for your to <a href="http://www.windowspasswordsrecovery.com"><b>change Windows 7 password</b></a>.<br /> <br /> Option 1: Change Windows 7 Password Use Ctrl + Alt + Del <ul> <li>It is the easiest way to <b>change Windows 7 password</b> by pressing Ctrl +Alt +Del. </li> <li><b>1.</b> Press <b>Ctrl + Alt + Del</b> when you are logged onto your Windows 7 PC. </li> <li><b>2.</b> Click on<b> Change a password</b>. </li> <li><b>3.</b> Type your old password, type your new password, type your new password again to confirm it, and then press <b>Enter</b>.</li></ul> Option 2: Change Windows 7 Password Use Computer Management <ul> <li>This solution to changing Windows 7 password:</li> <li><b>1.</b> Right-click <b>Computer </b>to select <b>Manage</b>.</li> <li><b>2.</b> In the coming Local Users and Groups screen, double-click <b>Local Users and Groups</b>, and then click <b>Users</b>.</li> <li><b>3.</b> Right-click the account that you need to reset the password for, and then click <b>Set Password</b>.</li> <li><b>4.</b> Type and confirm the new password.</li> <li><b>Note:</b> you can also go to Local Users and Groups screen by clicking <b>Start </b>button and inputting <b>lusrmgr.msc</b> into the Search box.</li></ul> Option 3: Change Windows 7 Password Use Password Reset Disk Windows 7 allows you to <a href="http://www.anypasswordrecovery.com/article/create-windows-7-password-reset-disk.html"><a href="http://www.windowspasswordsrecovery.com/getting_started/index.htm">create a password reset disk</a> </a>to <b>change Windows 7 password </b>in case that you are locked out of computer. When you forgot Windows 7 password, please plug your password reset disk in computer, and then follow the below steps to change Windows 7 password.<br /> <br /> <ul> <li><b>1.</b> Log on your computer with the target Windows account.</li> <li><b>2.</b> Enter a wrong password in the welcome screen password box, and hit <b>Enter</b>.</li> <li><b>3.</b> Click <b>OK </b>when the message that the user name or password is incorrect comes up.</li> <li><b>4.</b> Click on <b>Reset password</b> on the following screen.</li> <li><b>5.</b> Click <b>Next</b> when password reset wizard welcome screen appears.</li> <li><b>6.</b> Select the target password reset disk and enter <b>Next</b>.</li> <li><b>7.</b> Enter and confirm your new Windows password and click <b>Next</b>.</li> <li><b>8.</b> Click <b>Finish</b> to close the wizard.</li> <li><b>9.</b> Log on Windows 7 with the newly reset password.</li></ul><br /> Whether to use <b>Ctrl + Alt + Del</b> or use computer management to<b> change Windows 7 password</b>, it is only available when you can log on Window 7 machine with an account with administrator privileges. If you forget all administrator account passwords, you can turn to Windows password reset disk to change the lost Windows password. A windows 7 password reset disk can really save you a lot of trouble when you forgot Windows password and locked out of computer.<br /> <br /> If you forget to create Windows 7 password reset disk, you can try <a href="http://www.windowspasswordsrecovery.com" style="font-weight: bold;">Windows Password Recovery Professional</a>. This safe and reliable Windows password recovery software allows you to burn a bootable CD/DVD or USB flash drive to rest lost passwords for Windows 7/Vista/XP/NT and Windows Server 2008/2005/2000. You can log on your computer again within 5 minutes with this tool.<br />

on Nov 22, 2010 | Computers & Internet

1 Answer

I have lost my personal profile on windowes vista


all you can do is go control panel then user accounts to add a new user account and profile.

Oct 10, 2009 | Microsoft Windows Vista Ultimate Edition

Tip

How to reset Windows Vista password?


The question about how to reset Windows Vista password is often seen on various forums and Q&A websites. It is a serious problem for you if you are not good at PC. But if you are familiar with computer, the answer to the question can be very simple. There are many fast and easy ways for you to reset the password. Here it introduce you a simple one - create a Windows Vista password reset disk and use it to help you perform Windows Vista password reset.

Method 1: Reset Windows Vista password through Vista operating system

Windows Vista allows you to create a password reset disk with a USB flash drive in a few seconds. It can help you reset Windows Vista password when you forget it.

Part 1: Create Windows Vista password reset disk

Step 1: Log on your Windows Vista computer.

Step 2: Insert a USB flash drive in computer.

Step 3: Click Start button to select Control Panel.

Step 4: Click User Accounts and Family Safety in the following screen.

Step 5: Click User Accounts when a new screen appears.

Step 6: Click Create a password reset disk in the left pane in the coming up screen.

Step 7: The Forgotten Password Wizard will open, and then click next.

Step 8: Select the portable media drive which you want to create a password reset disk on, and then click next.

Step 9: Enter your current password, and then click next.

Step 10: Click next when the progress indicator shows 100% complete.

Step 11: Click Finish in the next window.

Step 12: You can now remove the flash drive from your computer.

Now you have successfully created a Windows Vista password reset disk. And you'll find a Userkey.PSW file when you open USB flash drive. Keep the file or USB flash drive in a safe place. You'd better to mark the USB flash drive so that you can distinguish it from other USB drives. When you forget password on Windows Vista and cannot log on your PC, you can use the USB password reset disk to reset Windows Vista password. You could follow the below steps.

Part 2: Reset Windows Vista password

Step 1: Start your computer and get to the Windows Vista logon screen.

Step 2: Type a wrong password, and then press Enter.

Step 3: Click OK when the error message that the user name or password is incorrect. And the Reset password link will appear on the Vista logon screen.

Step 4: Click Reset password to open Password Reset Wizard screen.

Step 5: Insert your USB password reset disk in computer.

Step 6: Click Next on the Password Reset Wizard screen.

Step 7: Select your USB password reset disk, click Next.

Step 8: Type and confirm a new Vista password.

Step 9: Input password hint, click Next.

Step 10: Click Finish when you've successfully reset Windows Vista password. You'll return to Windows Vista Logon screen.

Step 11: Enter your new Windows Vista password to log on your Vista machine.

Please Note: You must create the Windows Vista password reset disk before losing your password.

Method 2: Reset Windows Vista password with Windows Login Recovery

If you are locked out of Vista PC without a Windows Vista password reset disk, you'll need Windows Login Recovery to create one. This Windows password recovery software allows you to use a USB flash drive or blank CD/DVD to create a bootable Windows password reset disk. With it, you'll never to be worried when you need to perform Windows Vista password reset. It is also easy for you. Follow the below steps.

Step 1: Download Windows Login Recovery and install it on a computer that you could log on.

Step 2: Burn a bootable CD/DVD or USB flash drive password reset disk.

Step 3: Reset Windows Vista password to be empty.

Step 4: Log on Windows Vista without password.

on Oct 28, 2010 | Computers & Internet

Tip

Top 3 Windows Vista Password Recovery Measures


If you've forgotten password on Windows Vista and cannot log on your computer again, you need to perform Windows Vista password recovery to bypass your lost Windows Vista password. But the problem for you is that how can you recover the password and will it be difficult to perform Vista password recovery? Below is a step-by-step guidance for you to recover Windows Vista password with 3 different methods.

Method 1: Perform Windows Vista password recovery with password reset disk

Windows Vista allows you to create a password reset disk with a USB flash drive in a few seconds. It can help you reset Windows Vista password when you forget it. Just try to recover Windows Vista password as follows if you have a Vista password reset disk at hand.

1. Start your computer and get to the Windows Vista login screen.

2. Type a wrong password, and then Reset password link will appear on the Vista login screen.

3. Click Reset password to enter to Password Reset Wizard screen, and then click next.

4. Select the right disk if you have more than one password reset disk, click next.

5. Type in a new Vista password and password hint, click next.

6. Click Finish when you've successfully reset Windows Vista password.

Method 2: Perform Windows Vista password recovery on safe mode

In addition to reset Windows Vista password with password reset disk, you can also recover Windows Vista password on safe mode. And the presupposition is that you have can log on computer with another Windows Vista administrator account.

1. Press F8 when your Windows Vista PC is booting. You will come to the Advanced Boot Options.

2. Select Safe Mode with Command Prompt and press Enter.

807a5b2.png

3. Enter safe mode with an available admin account. And a command prompt will appear.

4. Type net user in command prompt and press Enter. It will show you all accounts on the Windows Vista.

42ce186.png

5. Type net user Mike 123456 (Mike is the locked admin account's name and 123456 is the new password. This depends on the setting of your computer) and press Enter. Now you have successfully created a new password on the locked admin account.

e01db22.png

6. Type shutdown -r -t 00 and press Enter.

7. The computer will reboot automatically and then you can log on Windows Vista with the new password.

Method 3: Perform Windows Vista password recovery with Windows Login Recovery

Windows Login Recovery is efficient Windows password recovery software designed to recover Windows login passwords for any version of Windows, including Windows 7, Vista, XP, 2003, 2000, NT, 2008. It is not necessary for you to reinstall the system when you forgot or lost your Windows login password. But a blank CD/DVD or USB flash drive and an available computer with optical drive is required before starting to perform Win Vista password recovery as below:

1. Download Windows Login Recovery and install it in any available computer.

2. Run the program and insert a blank CD/DVD or USB flash drive into computer. You will see a default path of an ISO image file after running the application.

3. Select CD/DVD or USB drive to burn the ISO image file and click Burn.

4. After burning, insert the CD/DVD or USB drive to your locked computer.

5. Set the locked computer to boot from CD/DVD or USB drive. After setting BIOS to boot from CD/DVD or USB drive, the computer will restart automatically. And then you can recover Windows Vista password under DOS.

6. Choose the installation path of Windows, and enter the ID of the path.

80d935f.jpg

7. All the user names will be displayed for you, and you can select one to remove its password by entering the ID of User Name. And then enter y to confirm your operation.

944e51e.jpg

8. After removing the selected password, you can enter y to continue to reset other passwords, or enter n to finish.

3d8a498.jpg

9. After entering n to finish, eject the CD/DVD or USB drive and press any key to restart the computer. Now, you can log on your PC without password.

The above 3 methods can help you perform Windows Vista password recovery easily and safely. It is no need for you to worry if you forget Windows Vista password. Why not try this amazing Windows password recovery software to recover Windows Vista password instead of reinstalling computer?

on Sep 09, 2010 | Computers & Internet

1 Answer

Will show avaliable wireless networks but won't connect


TCP/IP stack repair options for use with Windows XP with SP2 & Vista.

For XP, Start, Run, CMD to open a command prompt.

For Vista, Start, Programs\Accessories and right click on Command Prompt, select "Run as Administrator" to open a command prompt.

Reset WINSOCK entries to installation defaults: netsh winsock reset catalog

Reset TCP/IP stack to installation defaults. netsh int ip reset reset.log

Reboot the machine.

if the Issue presist then you need to try System restore
If Windows XP starts loadTOCNode(3, 'moreinformation'); 1. Log on to Windows as Administrator. 2. Click Start, point to All Programs, point to Accessories, point to System Tools, and then click System Restore. System Restore starts. 3. On the Welcome to System Restore page, click Restore my computer to an earlier time (if it is not already selected), and then click Next. 4. On the Select a Restore Point page(try the date 2 dats prior it was working or the First Bolded Date of that month), click the most recent system checkpoint in the On this list, click a restore point list, and then click Next. A System Restore message may appear that lists configuration changes that System Restore will make. Click OK. 5. On the Confirm Restore Point Selection page, click Next. System Restore restores the previous Windows XP configuration, and then restarts the computer. 6. Log on to the computer as Administrator. The System Restore Restoration Complete page appears. 7. Click OK.

Aug 09, 2008 | Linksys WUSB54GSC Compact Wireless-G USB...

1 Answer

Default message when logging on


Hi

Pls type 'msconfig' in Run window in XP ir in 'Start Search' in Vista and once you get to the System Configuration Utility screen, go to the Startup tab abd there uncheck the option 'Realtek High Definition Audio'. Click 'Apply' and then close it and restart the computer.
Once you do this, it will not bother you again.

Feb 29, 2008 | Computers & Internet

Tip

How to solve Internet Explorer 8 installation problems


Method A: Reset Windows security settings back to the defaults
Restore the security settings to the default settings.

To fix this problem automatically, click the Fix this problem link which is in the article 949220 Then click Run in the File Download dialog box, and follow the steps in this wizard.
1. Click Start, click Run, type cmd, and then press ENTER.
2. In Windows XP, type the following command, and then press ENTER:
secedit /configure /cfg %windir%\repair\secsetup.inf /db secsetup.sdb /verbose
In Windows Vista, type the following command, and then press ENTER:
secedit /configure /cfg %windir%\inf\defltbase.inf /db defltbase.sdb /verbose
You receive a "Task is completed" message and a warning message that something could not be done. You can safely ignore this message. For more information about this message, see the %windir%\Security\Logs\Scesrv.log file.
Next steps After you run this Microsoft Fix it (or complete these manual steps), standard user accounts may no longer appear on the log on screen when you start your computer or try to switch users. This occurs because standard user accounts are removed from the Users group when you reset Windows security settings. To add the affected users accounts back to the Users group, follow these steps:
1. Click Start, and then All Programs. Or click Programs.
2. Click Accessories, and then click Command Prompt (Windows XP). Or right-click Command Prompt, and then click Run As Administrator (Windows Vista).
3. In the Command Prompt window, type net users and then press ENTER. A list of user accounts is displayed.
4. For each accountname listed in the Command Prompt that is missing from the log on or switch user screen, type the following command and then press ENTER:
net localgroup users accountname /add
5. Now go to the "Did this fix the problem?" section.
Note In Windows Vista, the Defltbase.inf file is a Security configuration template for the default security. You can view the settings for this file in the following location: %windir%\inf\defltbase.inf
For online Help about Secedit, click Start, click Run, type %windir%\help\secedit.chm, and then press ENTER.
Advanced troubleshooting
Method E: Check for any files that cannot be backed up or updated
This method is rated: Moderately difficult.
To complete this method, follow these steps:
1. Determine whether a problem is preventing the files from being backed up or updated. To do this, follow these steps:
a. Click Start, and then click Run.
b. Copy and then paste (or type) the following text in the Open box, and then click OK to open the ie8_main.log file:
%windir%\ie8_main.log
Note By default, the ie8_main.log file is located in the C:\Windows folder.
c. Press CTRL+END to move to the end of the ie8_main.log file.
d. On the Edit menu, click Find.
e. In the Find what box, type ArchiveFileForUninstall:ArchiveSingleFile Canceled.
f. Under Direction, click Up, and then click Find Next.
If you find the "ArchiveFileForUninstall:ArchiveSingleFile Canceled" text, this indicates that there is a problem that is preventing an Internet Explorer 8 file from being saved for removal. For example, text that resembles the following in the log file indicates that a problem exists:
Time_stamp: ArchiveFileForUninstall:ArchiveSingleFile Canceled
Time_stamp: DoInstallation:UpdSpCommitFileQueue for AlwaysQueue Failed: 0x4c7
If you do not find the "ArchiveFileForUninstall:ArchiveSingleFile Canceled" text in the ie8_main.log file, contact Support.
2. Reset the permissions for the Vgx.dll file. To set the permissions of the file to the default settings, click Start, click Run, type cmd, and then click OK. At a command prompt, copy and then paste (or type) one of the following commands, and then press ENTER:
o If you are running Windows XP, copy and then paste (or type) the following command:
echo y| cacls "%CommonProgramFiles%\Microsoft Shared\VGX\vgx.dll" /P BUILTIN\Users:R "BUILTIN\Power Users:C" BUILTIN\Administrators:F "NT AUTHORITY\SYSTEM:F"
o If you are running Windows Server 2003, copy and then paste (or type) the following command: echo y| cacls "%CommonProgramFiles%\Microsoft Shared\VGX\vgx.dll" /P BUILTIN\Users:R "BUILTIN\Power Users:C" BUILTIN\Administrators:F "NT AUTHORITY\SYSTEM:F" "NT AUTHORITY\TERMINAL SERVER USER:C"
3. Try to install Internet Explorer 8. If Internet Explorer cannot be installed, contact Support. If the log file shows a problem, repeat all the steps in this method. If you repeat the process, and Internet Explorer 8 still cannot be installed, but the log file is clean, contact Support

on May 03, 2010 | Computers & Internet

Not finding what you are looking for?
Acer Aspire 5920-6727 Notebook Logo

37 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acer Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Mohammed Ebrahim M
Mohammed Ebrahim M

Level 3 Expert

556 Answers

Are you an Acer Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...