Question about Frigidaire GLTF2070DS Front Load Washer

Open Question

Error code F04 on a Frigidaire Front Loading Washing Machine Model#GLTF2070DS

The machine will run but quit and displays an F04 error code. Do you have any idea on what is going wrong?

Posted by on

  • sherrystanek Dec 09, 2007

    My Frigidaire front loader started showing an F 04 code last week and when the door was opened, I found the clothes still saturated with detergent water. I first tried to get it going again by pausing, shifting stuff around and restarting, but nothing happened. I unplugged the machine and waited and then reconnected it and also, nothing happened. I checked to make sure it was level after unplugging it again then reconnected it and it allowed me to cancel the load. I then put it on the drain/spin cycle option and it finished. Since I didn't know at what point the washer stopped, I ran the load again and several loads after that with no problems. Now it is doing it again, but these interventions aren't helping which makes me wonder if they did the first time. Maybe I just got lucky? There must be somebody who knows whats causing this! Thanks for any help you can give.



    Sherry

  • valentine01 Dec 21, 2007

    Our frigidaire front-load washer has started showing the F04 error code. It stops before the end of the cycle and we find the clothes very wet.  We can then run the spin cycle separately.  Does anyone know what is causing this problem?

×

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: How to increase the water level of Front loading washing machine

I have used extra weight inside the tub. I have used bottle of water and also a plastic 2 or 5 pound weight.

Posted on May 05, 2010

Ad
  • 1 Answer

SOURCE: frigidaire gltf2940fs front loading washing

I just fixed mine TODAY. here is the deal. The hose MAY be clogged, true. But there is a second hose with a filter inside the machine. You remove the lower front panel (there are just 2 screws near the floor holding it on) and look for a wide black hose with accordian like folds that is coming from the drum. unscrew the hose clamp and reach in (this will be gross) and pull out the (almost guaranteed to be clogged) filter. then reassemble:)
I was told that i needed a new pump. they were gonna charge me 250 for the whole repair. I am so glad that my friend came over and did this for me for free. The pump is FINE. I am doing laundry as I type this:)

Posted on Feb 26, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My brother NX-600 keeps displaying the code F04, if I switch machine off then on again it will allow me to sew, but then stops showing the F04 message agai.


You need to find out what that particular error code means and address that particular issue. It could be something very simple but frustrating, just the same..

Search for:
Make Model error code F04

Oct 19, 2017 | Brother Sewing Machines

1 Answer

Keeps Stopping and saying UE


uE error code 79631512210 Kenmore Elite Washer - Sears ...

www.searspartsdirect.com > Ask an Expert
Jan 10, 2014 - uE error code 79631512210 Kenmore Elite Washer ' SearsPartsDirect. ... After unloading the washer completely, the machine attempts to rebalance the .... to ensure proper fit and to keep appliances running for years to come.

UE Error code on my front loading Kenmore washing machine

www.shopyourway.com > Manage My Life > Questions
Jun 13, 2011 - I have a Kenmore 3.5 cu. ft. front loading washing machine (model #4027) and it is 1 year old. ... what does the F35 error code on my kenmore elite front loading washing machine mean? F13 code on Kenmore Elite HE3 front loadingwashing machine.

Jan 21, 2016 | Kenmore Washing Machines

1 Answer

What does e90 mean?


  • E90 Error - YouTube www.youtube.com/watch?v=IhHvw2K7XO0
    • BY D CUTHRELL
    • 3 MIN
    • 24K VIEWS
    • ADDED 2012-11-16
    Video embedded · E90 Error Code on Frigidaire Washer cleared with Hair Dryer.
  • Frigidaire E90 Error ' eHow www.ehow.com > Home > Home Appliances > Washer & Dryers Frigidaire E90 Error. Frigidaire front-loading washing machines offer a control panel with keypads to set the desired wash cycle and any options, as well as monitor ...
  • Zanussi Washing Machine displays an error code E90.? howtomendit.com > ... > Household Appliances, Washing Machines How to fix anything. Free repair help - zanussi washing machine displays error code e90.

  • Dec 23, 2015 | Washing Machines

    1 Answer

    E20 Error


    Hello Diane Snow, thank you for your inquiry!

    I understand that your Frigidaire washer is displaying "E20" error code. The "E20" error code means water is not pumping out fast enough. First, you want to check the hoses for restrictions.

    If the hoses are not restricted it could be an issue with the drain pump or control board. I would suggest seeking assistance from a professional technician for proper repair. I hope this is helpful. -Matt

    Oct 06, 2014 | Frigidaire Washing Machines

    1 Answer

    Error message e41


    Hello Friend, thank you for your inquiry!

    If you are receiving an error code E41 on your Frigidaire front load washer, your loading door may be ajar. Double-check to ensure that it is closed. If it is secure, reset the power to your appliance for about 30 seconds. You can do this by unplugging your washer or flipping your circuit breaker into the off position. If the error persists, it could either be the door switch assembly or your washer's main control board. In that case, a certified technician would generally replace the faulty part after proper diagnosis.

    Hope this helps! - Z

    Jul 07, 2014 | Frigidaire GLTF2070DS Front Load Washer

    1 Answer

    My washing maching is reading E20 and it is not washing. it seems to stop after a few minutes of washing and then it will read E20 and just continuosly beep


    Hello.

    Frigidaire front-loading washing machines have an electronic control panel where the wash cycle and any other wash options are selected, and the wash cycle is initiated and stopped, if necessary. The control panel also has indicator lights that show the washer status and will display an error code if there are issues with the washer. The "E20" error code indicates a possible pump problem.

    Blocked Pump

    One of the primary reasons why there may be an "E20" error code on a Frigidaire front-loading washing machine is if there is something blocking the pump. Disconnect the washing machine from the power and release the clips on each side to remove the front access panel. Set a container under the pump drain, which is located on the lower right side of the washing machine. Open the pump drain plug and allow it to drain. Clean out any debris that might be causing the obstruction, then close the drain plug. Close the access panel and restore power to the washer.

    Drain Hose

    If the drain hose is blocked or crimped, the water may not pump out fast enough, causing the pump error to appear on the display. Straighten out the drain hose in the rear of the washing machine and move it away from the washer if it's trapped between the wall and the washing machine.

    Oversudsing

    If too much detergent--or the wrong kind of detergent--is used in the washing machine, too many suds may result. This can overwhelm the drain and pump system, resulting in the error. Use only high efficiency (HE) laundry detergent with Frigidaire washing machines and follow specific instructions on the laundry container for the recommended amount of detergent. Run a drain cycle if there are excess suds in the washer to clear out the system.

    Pressure Switch or Control Boar

    The pressure switch may not be communicating properly with the control board, which can cause the E20 error to occur. The other possibility for the E20 error code is if the control board has failed entirely. Try to reset the washing machine by pressing "Stop/Cancel" and disconnecting the washing machine power cord. Wait 30 seconds, then restore power. Make a new cycle selection and press "Start" to see if the error code returns. If it does, turn off the washing machine and contact Frigidaire for repair.

    Thanks.

    Nov 08, 2011 | GE Energy Star WCVH6260F Front Load Washer

    1 Answer

    I have a Kenmore Elite washer, model 44092. The machine won't spin and the error code is E20. What is wrong with it?


    The machine, based on the error code, is made by Frigidaire for Kenmore. Error code E20 pertains to a slow or no drain problem which can be due to a clogged/kinked drain hose, blocked drain filter/coin trap, or a broken drain pump. The link below provides the detailed troubleshooting procedure of this error code.

    Error Code E20 on Frigidaire and Frigidaire-made (including Kenmore) Front Load Washing Machines

    Error Code E20 on Frigidaire and Frigidaire-made (including Kenmore) Front Load Washing Machines

    Aug 20, 2011 | Washing Machines

    1 Answer

    Error code


    'dr' is an error code that indicates the door is not closed. If closing properly the door lock may have to be replaced.

    Jun 15, 2008 | Frigidaire ATF6000ES Front Load Washer

    1 Answer

    Frigidaire washing machine model LTF2940E


    Check your outlet filters, clean out. The machine will not spin if the filter is blocked. Also check your inlet into the machine. Clean screens on both ends of the pipes. Refit carefully.

    Nov 30, 2007 | Frigidaire GLTF2940ES Front Load Washer

    Not finding what you are looking for?
    Frigidaire GLTF2070DS Front Load Washer Logo

    Related Topics:

    349 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Frigidaire Washing Machines Experts

    Dan Webster
    Dan Webster

    Level 3 Expert

    8220 Answers

    Gerry Harvey
    Gerry Harvey

    Level 3 Expert

    1474 Answers

    Donald DCruz
    Donald DCruz

    Level 3 Expert

    17130 Answers

    Are you a Frigidaire Washing Machine Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...