Question about Computers & Internet

1 Answer

How u turn up the volume on a ViewSonic monitor w?Built-in spkrs?

I have a fairly new View Sonic monitor (the model with the built-in -i-Pod dock in front). I have located the volume control wheel just to the left of the I-Pod dock on the base, and that does let me increase the maxium voliume a LITTLE BIT, but not really enough to be able to watch some Netflix-DVDs. Is there another volume control elsewhere, and if there is, WHERE IS IT ??

THANKS FOR YOUR HELP.

Posted by on

  • jamesj47 Jan 18, 2009

    I alos have a ViewSonic Monitor with built in speakers. There is a button on the right side, to turn the sound on and off. But I cannot figure out how to increase the volume very much. When I watch a video clip on the internet, I can barely hear the sound even if I raise the video's sound control to the highest level.

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

When i push the volume up or down button on the side of the monitor, a key icon pops up on the bottom left corner not letting me control my volume

Posted on Feb 10, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Can't get sound to work on viewsonic N3735w tv


first check volume level- turn on full next check to see if onboard speakers is selected- otherwise the audio is sent to satellite speakers with wires RCA

Sep 02, 2014 | Computers & Internet

1 Answer

On my new Bose I pod dock the remote doesn't work properly. The volume and power buttons work but track switch does not.


1) replace new batteries with the same mark and polarities and full charges.
2 open the remote and clean it the keypad from dirty, oxide, and corrosion,with c.cleaners.

3) Proceed again,
God bless you

Oct 13, 2012 | Televison & Video

1 Answer

I have a Sonic Integrity Tube Pod (Tube Pod) and need to know how to make it work with iphone 4. I can play the iphone 4 only through the earphone jack at this point. The iphone 4 however can sit on the...


It is normal to get incompatible devie message when you attach your iphone to dock because you don't use apple dock. I have 5 different brand portable speakers, charging docks. And all of them give same message when i attach my iphone 4 to dock. When you press "ok" on your iphone screen, it should start to play your songs. You don't need to use your iphone at airplane mode.

sonic-integrity-tube-pod-tube-pod-3h5pkc2unruv115jj1tsixdi-1-0.png

You may have problem with your iphone dock conncector cable pins. If audio related pins are damaged, you can not use any external iphone speakers with your iphone4. In order to test your sonic integrity tube pod; try another ipod or iphone on its dock. If it gives same result, you may need to change dock connector unit on sonic integrity tube pod due to damaged pins. If it works; iphone 4 dock connetor cable of your iphone 4 needs to be replaced.

Nov 29, 2010 | Sonic Integrity MP5-DS iPod Tube Docking...

1 Answer

Need replacement battery for I-pod docking station Model#5084


I have a battery from my if-2 by Sonic Impact. My ipod connectionwent bad. Battery and charger available.

Jul 23, 2010 | Sonic Impact Technologies IF22 Docking...

1 Answer

Hi, i have an apple i pod docking station Model A1121. It doe'snt want to play whenever an ipod is attached to it. The lights are all on and flash when pushing the volume button, buut no noise.


Hi, i have an apple i pod docking station Model A1121. It doe'snt want to play whenever an ipod is attached to it. The lights are all on and flash when pushing the volume button, buut no noise.
my mail id : ravi85_india@hotmail.com

May 20, 2010 | JBL On Time Docking Station for Apple iPod...

1 Answer

Need a power supply for View Sonic VX922. Where


Here is a link for your View Sonic power supply:

http://www.shopzilla.com/laptop-power-adapters/viewsonic-power-supply/9177/products

It should have a replacement for you.

Jan 30, 2010 | ViewSonic VX922 19" Monitor Flat Panel

2 Answers

View Sonic Monitor


Hello,

This model has a know issue with the power supply. Check out our repair guide at: www.ccl-la.com click the monitor repair link and then go to page 2, its listed under the Wetinghouse LCM-22W3 monitor, they use the same power supply - DAC-19M009. If you can solder then you should be able to do the repair yourself. If you don't want to do the repair we do offer a repair service for $35 plus return shipping.

I hope this helps, If so please rate our solution.

Buddy
Corporate Computer
www.ccl-la.com

Dec 28, 2009 | ViewSonic VX2235WM Monitor

2 Answers

Control Pod for Bose Companion 5 speaker system


I had the same problem right out of the gate, the volume dial on my control pod for my Companion 5 wasn't working, however, the touch pad and LED worked. I called Bose customer service and was instructed to:

First, unplug the power directly at the back of the woofer while the unit was on;

Next, I was instructed to unplug the control pod, visually inspect for any damage/defect;

Finally, re-seat the control pod on the back of the woofer and then lastly plug the power cable back into the woofer.

It worked like a charm. I hope this is helpful!

Jan 29, 2009 | Bose Companion 3 Computer Speakers

1 Answer

We have a HP vp15 monitor. Recently we have not had any sound.


Monitor control buttons are located on the front panel of the monitor on the lower right. Make sure that you connect the built-in monitor speakers to the computer, using the audio cable (green connector). The connection on the monitor is located on the back of the monitor. On that monitor I believe the volume button is the second one (from left tot right) on the lower right. Also you may want to check your systems volume on your computer by left clicking one time on the little speaker on the lower right of your screen by the clock.

Hope this helps

-Curtis
Rate It!

Jan 29, 2009 | HP Pavilion vp15 Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

1,288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...