Question about Blitzz Technology (BWA611) Router

2 Answers

Blitzz router I have a blitzz router and suddenly I wasn't able to connect to the internet. I am receiving the internet from comcast and I know that is working because when I hooked the cable directly to the computer, I am able to get on-line. When the router is plugged in, I get a strong signal to my computer, but I'm unable to get the internet. I tried disconnecting everything and waiting and then plugging it in and still no luck. Any more suggestions?

Posted by on

2 Answers

Re: blitzz router

You need to clone ur mac address to the router there is an option to do that, open a command prompt to ipconfig/renew look at the default gateway, type that number in internet explorer and this will take you inside the router, it'll ask for usr name and pw default is admin with no pw, run the setup utility and make sure to copy ur mac address into the router there will be an option for this

Posted on Oct 12, 2007

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Master
  • 2,961 Answers
Re: blitzz router

Get into the routers settings and check that DHCP is enabled to allocate ip addresses automatically and that your computers network cards tcp/ip properties are set to obtain ip address automatically. When you connected the modem directly your ip address has probably changed.

Posted on Apr 11, 2007

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

3 Answers

D-link has stopped working with comcast internet.

Are you trying to install the router.You can do it manually
without the CD.
MAke sure that your computer is able to go
online through the modem.
If your computer is able to go online
through the modem
Then you need to connect the computer to the
router ad the modem to the router.
open the set up page of the
router and change the settings of the router according to the
Click Here for step by step by instructions

Jan 16, 2010 | D-Link AirPlus Xtreme G DI-624 Wireless...

1 Answer

How should the D-link be setup to work with comcast and vonage? After I set vonage or internet do not work. I tried the comcast modem to d-link and d-link to vonage.

If you want to RECEIVE telephone-calls:

COMCAST ADSL/CABLE modem <---> VONAGE <---> wireless-router

Turn each piece off.
Turn on the COMCAST modem, and wait for its lamps to settle-down to a "steady" pattern.
Turn on the VONAGE router, and wait for its lamps to settle-down to a "steady" pattern.
Turn on the D-link router, and wait for its lamps to settle-down to a "steady" pattern.
Restart the computer that is connected to the D-link router,
and you should have Internet access.

Dec 01, 2009 | D-Link Vonage-enabled Wireless Router...

2 Answers

My router doesnt work now that I have a new modem. I have Comcast internet and the Blitzz BWA611 router

Have you restarted the devices in order?
  1. Unplug the Ethernet cables from modem to router and router to computer.
  2. Restart the modem and wait until all lights are on
  3. Restart the router and wait until all lights are on
  4. Plug in an Ethernet cable from modem (first) to router (WAN or Internet port, second).
  5. Plug in an Ethernet cable from the router (first, LAN port) to your computer (second).
  6. Check the settings of the router - Make sure it is set to DHCP.
If you have any more questions or this description is not clear to you, just come back here and leave a comment - I'm happy to help.

May 19, 2009 | Blitzz Technology (BWA611) Router

1 Answer

Router wont work with new modem

Have you flashed the latest firmware to the router?  

May 08, 2009 | Blitzz Technology Routers

1 Answer

Belkin G wireless Router

Do you have an all-in-one router from Comcast? For example, do you have the cable (RF) line and your PC plugged into the Comcast router? If so, unplug your PC from the Comcast router and connect the Internet port of the Belkin to the ethernet port on the Comcast router. Then plug your PC into the LAN port on your Belkin.

[PC] ---> [Belkin] ---> [Comcast] ---> Internet

Once you have connected your boxes as displayed above, you will need to power everything off and bring up the boxes in the following order:

Comcast (wait 60 seconds)
Belkin (wait 60 seconds)

If you cannot get out to the internet, momentarily press the reset button on the back of the Comcast box. Comcast routers are weird. A poweroff should reset the router but I have seen a few times where nothing works until the reset button is pressed (this is also recommended by Comcast).

I hope this helps.

Dave Grannas

Jan 26, 2009 | Belkin (F5D7230-4) Router (587009)

1 Answer

Getting Blitzz BWA 711 wireless router configured in my computer

Hi I need the router settings for BWA711 do you know what it is . Thank you, Linda

Dec 24, 2008 | Blitzz Technology BWA711 (B3WL000900)...

1 Answer

I have no money to pay the experts My problem i how to confgure the router in to my laptop computer (Blitzz 108 BWA 711)

is this just a simple stand alone, tryin to connect to the internet?

if so -
*unplug your modem and your router
*Connect your modem to your router (Modem output to Router Input/Internet)
*Plug in your modem first and let it boot up for a minute
*Plug in your router and let that boot up for a minute
* now you should be able to see your router in the "network connections"
* once you are connected open a browser
*type in the address bar and that should take you to your router setup, follow your manual

any further problems please Let me know :)

Dec 24, 2008 | Blitzz Technology BWA711 (B3WL000900)...

1 Answer

Blitzz BWA611 Router

a router shouldnt need to dial for a connection, go to open your internet browser and go to tools, then internet options, then click connections tab and select never dial a connection so as to stop internet explorer looking for a modem connection

Aug 30, 2007 | Blitzz Technology (BWA611) Router

2 Answers

Blitzz Router

Ah, you can no longer use the modem or the Blitzz screen to connect to your Internet connection. You'll need to patch another Ethernet cord from the router to your Ethernet port on your computer and it should automatically connect. If you still get prompted to dial, open up Internet Explorer and ignore any prompts to dial and then click Tools, then Internet Options, then click the Connections tab at the top, then click the selection to Never Dial a Connection. Confirm your choice by clicking OK and then try browsing the Internet like usual.

Aug 30, 2007 | Blitzz Technology BWA711 (B3WL000900)...

2 Answers

How to make Blitzz BWA711 Router secure?

The minimum security will be WEP, so the wireless receivers on your pc should match the type of encryption. To give you WEP you select security in the routers menu and choose yourself a mixture of 6 pairs of letters and numbers in any column from 1 to 6 if it gives you 6 options. Once the letters and numbers are chosen, note down the chosen leters and numbers, and enable wep and restart router. Now go to your pc's and and go to the software you use for the recievers and select WEP. You will probably have to tell the programme whether you are on a 'Shared network key' or an 'Open network', depending on your network type (try both until one works if not sure). It will then ask for the numbers and letters you chose and wrote down, enter these and click apply and restart system. The pc's should now connect to the router. Some wireless laptops are unable to recognise WPA type security or similair so WEP is better than nothing.

Jan 29, 2007 | Blitzz Technology BWA711 Router...

Not finding what you are looking for?
Blitzz Technology (BWA611) Router Logo

Related Topics:

108 people viewed this question

Ask a Question

Usually answered in minutes!

Top Blitzz Technology Routers Experts

 C. Dante
C. Dante

Level 3 Expert

623 Answers

Rick Johnson
Rick Johnson

Level 2 Expert

84 Answers

Christopher Thrash

Level 3 Expert

425 Answers

Are you a Blitzz Technology Router Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides