Question about Kenmore 15864/15862 Top Load Washer

1 Answer

Washer Kenmore 90 Series

I'm having a lint problem in my plumbing.. the lint is stopping up my plumbing..
Does the Washer Kenmore 90 Series have link catcher.. If it does I can't find it..

Posted by on

  • hyrump Dec 28, 2008

    Thanks for your help!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 640 Answers

Yes it has a lint trapped ..its on the bottom of wash basket,,its part of the wash basket..when the unit washes it traps the lint when the unit goes in to spin it shoots it down the drain,,i dont advice taking that out unless your a tech..now what you can do is fill unit with hot water and about a pint of bleach and let that do the work its also good for pipes,,this technic should have been a process 1 amonth ..

Posted on Dec 26, 2008

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a Kenmore 70 series Washing machine top load model 110 serial number 82870120 . where is the lint trap located and how to take out to clean? clothes have a lot of lint after being washed.


It is likely that a tissue or paper product was included with the wash load. The series 70 does not have a lint trap. At the hose connection to the house drain lint has been known to build up restricting the emptying. This buildup would not introduce lint into the washer.

If the water temperature is very very cold and you use powder detergent it will not dissolve completely into the water and will leave a white residue on the fabrics.

Try running a short load in the washer allowing for ample water to rinse out the machine before the next wash load.

Dec 28, 2015 | Kenmore series 70 80 90 Washer timer...

1 Answer

Washing machine lint trap


There is no trap per say. The lint catcher is self cleaning when the water is pumped out. It sounds like you are overloading it and the clothes are hitting the agitator. Operation should be agitation by water movement not beat by the plastic fins, run a wash cycle hot water no clothes to flush things out and try smaller loads.
Eric

Mar 14, 2010 | Kenmore 22622 Top Load Washer

1 Answer

I need a part number for the lint screen fora 9200l series dryer i lost the manual please help


Hello there:
Whirlpool recommends
8557884 Whirlpool Kenmore Lint Filter (screen)
This Genuine Whirlpool dryer lint filter is used on Whirlpool, Kenmore, KitchenAid and Roper dryers.
Special Note ***** Does your filter have a black spacer below the handle?.
************ If so you may need the Whirlpool Dryer Filter 8557857
The 8557884 Whirlpool Kenmore Lint Filter (lint catcher) is about 17 and 1/2 inches long and has a white handle
Hope this is helpful for you
best regards Michael

Nov 30, 2009 | Whirlpool GEW9200L Electric Dryer

1 Answer

Kenmore 90 Series Washer


CHANGE THE LID SWITCH

Apr 18, 2009 | Washing Machines

1 Answer

Kenmore 92274100 washer leaves lint on everything


Be sure to use higher water level on machine, don't overload machine Seperate lint givers from lint attractors. There is a lint catcher mounted on the bottom of the spin basket but it is self cleaning.

Jan 01, 2009 | Kenmore 24032\24036 Top Load Washer

2 Answers

Kenmore 90 Series Washer


You have a broken lid switch. Its # ll in the diagram. Part # is 3949238. Let me know if you need info on how to replace it, Dave www.washermd.com
02e81a1.png

Dec 17, 2008 | Kenmore 23822 Top Load Washer

1 Answer

Kenmore washer always makes lint on clothes


yeah check my four boxes and send me an e mail at b4829@yahoo.com ref lint on clothes

May 22, 2008 | Kenmore 22422 Top Load Washer

Not finding what you are looking for?
Kenmore 15864/15862 Top Load Washer Logo

Related Topics:

480 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Washing Machines Experts

Ron Lankford

Level 3 Expert

5383 Answers

Archaeology
Archaeology

Level 3 Expert

662 Answers

reliableservice

Level 2 Expert

313 Answers

Are you a Kenmore Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...