Question about Westinghouse Contempra Trio 42" Ceiling Fan 78510
If you have only a black and white (and bare ground wire) in the ceiling box where the old fan was connected before, you should connect both the blue and black wires from the fan to the Black (common) wire in the ceiling box.
Then connect the white wire from the fan to the white (neutral) wire in the box together. Connect the green and bare wires together (Ground wires) and the fan and light should function with the pull chains as designed.
IF you have a wall switch for the ceiling fan and a separate one for the light, it is simply a matter of making the connections for the light and fan to the proper wires going to the wall switch box. Typically, the ceiling fan's light wire (blue in most cases) is connected to the red wire in the ceiling box, while the fan wire (black in most cases) is connected to the black wire in the ceiling box. Connect the white wires together; and then the green and bare wires together for your ground and you should be set.
Remember to disconnect the power to this circuit by turning off the breaker before doing any wiring work.
I hope you find this Very Helpful and best regards!
Posted on Oct 12, 2009
NO NO NO..... Blue is Neutral...
BLACK is PHASE, BROWN is PHASE, RED is PHASE
WHITE is NEUTRAL, BLUE is NEUTRAL
Green, Green/Yellow is EARTH
Posted on Feb 21, 2010
Tips for a great answer:
Mar 09, 2014 | Hunter 23852 Classic Original Ceiling Fan
Aug 24, 2013 | Dryers
Sep 06, 2012 | Westinghouse Contempra Trio 42" Ceiling...
Aug 28, 2011 | Westinghouse Contempra Trio 42" Ceiling...
Mar 13, 2011 | Westinghouse Fans Indoor Ceiling Fans
Aug 28, 2010 | Westinghouse Turbo Swirl 78145 Ceiling Fan
Oct 27, 2009 | Westinghouse Contempra Trio 42" Ceiling...
Aug 13, 2008 | Westinghouse 78500 Casanova White Ceiling...
26 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: