Question about Philips 32PF5320 32 in. HD-Ready LCD Television

2 Answers

I need code for my Magnavox TV so that I can use the remote

I just got the Sony CD/DVD Player (DVP-SR200P) and have an older TV (Magnavox), but the Magnavox code is not listed in the manual. Does anyone know what the code is so that I can use it to control my TV? Thanks so much.

Posted by on

  • robert6748
    robert6748 Jan 03, 2012

    the code for magnavox is the philips code

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 67 Answers

Http://www.support.magnavox.com/html/index_us_en.html
You can go here and put in your tv model # and get the code from the support site

Posted on Dec 23, 2008

  • deanrdavis May 02, 2011

    No... there is no help for getting remote codes on this site. You can download the product manual, but no mention of any remote code.

×

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hey I have the same Problem... Just hold down the small Green tv button while tv is on and pres buttons 21 and and then release green button... tv should turn off! Worked for me, I forgot Magnavox is a product of Philips!! Hope it works!!

Posted on May 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My TV is a Sharp-AQUOS Model # LC52D64U, I have 2 DVD players. SONY DVD player Model #DVP-S530D and MAGNAVOX VIDEO CASSETTE RECORDER/DVD PLAYER MODEL#MWD2206. Thanks Barbara


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForHome/HomeEntertainment/LCDTVs/Manuals/tel_man_LC42_46_52D64U.pdf




SONY DVD PLAYER - MODEL # DVP-S530D:

http://www.docs.sony.com/reflib/docget.asp?manualid=8499&template_id=1&region_id=1&DL
=




MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:


http://download.m4c.magnavox.com/files/c/cmwd2206_f7/cmwd2206_f7_dfu_aen.pdf




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.


You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.




DIRECTV CONNECTION TO TV


Make sure your TV and DirecTV receiver are turned off before making any cable connections.
Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.
Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.
Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.
See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.


Here also is a link to a short video which demonstrates this basic HDMI connection procedure:

http://www.youtube.com/watch?v=J7P-yayRJ6c&NR=1




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.
In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.
At this point you should be getting an input signal from the DirecTV Receiver on your TV.
That completes the DIRECTV to TV connection portion of the system hook-up procedure.



SONY DVD PLAYER CONNECTION TO TV


Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.
Here is a link to a picture of an S-Video cable in case you need to see one:


http://amazingbestsellerstore.tk/wp-content/uploads/2011/08/31nOF2e5DXL.jpg





And here is a link to a picture of a set of 3 color RCA cables:


http://www.cameratron.co.za/images/productcables/cables/rca%20to%20rca.jpg




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.
See page 8 of the SONY DVD Player manual.
Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.
Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.
Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.
In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.
See page 11 of the TV manual, button number 7 on the remote control button layout diagram.
Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.
At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.
This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.


MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION

I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.
COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.
Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.
YELLOW cable plugs into the VIDEO OUT connector.
RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.
See page 7 of the MAGNAVOX manual, METHOD 1.
Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.
YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.
RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.

In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.
Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.
At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.
This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.
Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.

This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.


Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.

I hope that was helpful to you, good luck and take care.

Joe.

Oct 05, 2011 | Sharp Aquos LC-30HV4U 30 in. LCD HDTV

1 Answer

What's your problem?NO MANUAL FOR 52" sHARP


Sorry about the delay Barbara, I was looking for your clarification comments on the other question page. I didn't realize that you posted this information here in a brand NEW question box. No problem though, this will work just fine too. I will post the information on both question pages so there is absolutely no confusion.

First of all here are the links to each of the USER'S MANUALS for your particular system components:

SHARP AQUOS TV - MODEL # LC52D64U:


http://files.sharpusa.com/Downloads/ForH...




SONY DVD PLAYER - MODEL # DVP-S530D:



http://www.docs.sony.com/reflib/docget.a...





MAGNAVOX VCR / DVD PLAYER MODEL # MWD2206:



http://download.m4c.magnavox.com/files/c...




To view the Owner's Manuals with Operating Instructions for each device, just use your mouse to click on the links, which are the underlined and highlighted text just above. Each one of them will open a new web browser page for you automatically and allow you to view the information indicated and the contents of the Owner's Manual.



You did not mention exacly what model of DirecTV receiver you have, so first of all, I will just give you the generic instructions for connecting that device to your TV using an HDMI cable connection.





DIRECTV CONNECTION TO TV



Make sure your TV and DirecTV receiver are turned off before making any cable connections.

Now connect the COAX cable from the satellite antenna to the COAX IN jack on the back of the DirecTV receiver.

Now connect one end of an HDMI cable to the HDMI OUT jack on the back of the DirecTV receiver.

Then connect the other end of that HDMI cable to the HDMI INPUT 5 jack on the back of your TV.

See page 10 of your TV's USER MANUAL for a detailed labelled diagram of the rear input connections on your TV.



Here also is a link to a short video which demonstrates this basic HDMI connection procedure:


http://www.youtube.com/watch?v=J7P-yayRJ...




If you want to test your system at this point, you can. Just plug in the power cords to the DirecTV receiver and your TV, then turn them both on.

In order to see the output from the DirecTV receiver, you will need to select the INPUT 5 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 5 on the TV display screen.

At this point you should be getting an input signal from the DirecTV Receiver on your TV.

That completes the DIRECTV to TV connection portion of the system hook-up procedure.




SONY DVD PLAYER CONNECTION TO TV



Your Sony DVD player should have come with an S-VIDEO cable and set of RCA cables (yellow / red / white ) included.

Here is a link to a picture of an S-Video cable in case you need to see one:



http://amazingbestsellerstore.tk/wp-cont...





And here is a link to a picture of a set of 3 color RCA cables:



http://www.cameratron.co.za/images/produ...




Connect one end of the S-VIDEO cable to the S-VIDEO OUT on the back of your SONY DVD player.

See page 8 of the SONY DVD Player manual.

Then connect the other end of the S-VIDEO cable to the S-VIDEO INPUT 2 terminal on the back of your TV.

Now take colored RCA cables and one end of the red and the white cables into the LINE OUT (AUDIO L / R) red and white jacks on the back of you SONY DVD Player.

Then take the other ends of those cables and plug the red and white plugs into the INPUT 2 (AUDIO L / R) red and white jacks on the back of your TV.

In order to see the output from the Sony DVD Player, you will need to select the INPUT 2 input mode using the INPUT button on your TV remote.

See page 11 of the TV manual, button number 7 on the remote control button layout diagram.

Keep pressing the INPUT button repeatedly until you see INPUT 2 on the TV display screen.

At this point you should be getting an input signal from the Sony DVD Player on your TV as long as the DVD player is turned on with a disc inserted.

This completes the SONY DVD PLAYER to TV connection portion of your system hook-up procedure.



MAGNAVOX VCR / DVD PLAYER TO TV CONNECTION



I will describe the connection procedure using the basic 3 color (yellow / red / white) cables which were included with the unit at purchase.

COMPONENT VIDEO cables are also a slightly higher quality option but would have to be purchased by you separately.

Take one end of the 3 color RCA cables and insert the colored plugs into the corresponding colored VIDEO OUT and AUDIO (L / R) OUT connections on the back of the MAGNAVOX VCR / DVD Player.

YELLOW cable plugs into the VIDEO OUT connector.

RED and WHITE cables plug into the AUDIO (L / R) OUT connectors.

See page 7 of the MAGNAVOX manual, METHOD 1.

Now take the other ends of the 3 color RCA cables and plug them into the corresponding colored INPUT 1 connections on the back of your TV.

YELLOW cable plugs into the INPUT 1 - VIDEO IN connector.

RED and WHITE cables plug into the INPUT 1 - AUDIO (L / R) IN connectors.


In order to see the output from the MAGNAVOX VCR / DVD Player, you will need to select the INPUT 1 mode using the INPUT button on your TV remote.

Keep pressing the INPUT button repeatedly until you see INPUT 1 on the TV display screen.

At this point you should be getting an input signal from the MAGNAVOX VCR / DVD Player on your TV as long as the DVD player is turned on with a disc or tape inserted and playing.

This completes the MAGNAVOX VCR / DVD PLAYER to TV connection portion of your system hook-up procedure.

Recording content on the VCR from an outside source will require additional connections which are described in detail on page 6 of the MAGNAVOX manual.


This completes the most basic hook up of your entire system using the cables which were supplied stock with each piece of equipment. As I stated, other options are available for purchase and the instructions for connecting these types of cables are all in the various OWNER'S MANUALS provided above.



Please comment back here to this page if you have any details to add, have any questions, have difficulty accessing the links, or just require further general assistance and I will respond as soon as I see it.


I hope that was helpful to you, good luck and take care.


Joe.

Oct 04, 2011 | Flat Panel Televisions

1 Answer

Need remote code for the sony RM-V302 remote for toshiba tv and magnavox dvd player and if available magnavox digital box thanks


Hello hhudak and welcome to FixYa. Below are the remote codes you requested.

Toshiba Television remote codes

0156, 0060, 0154

Magnavox DVD Player remote codes

0503

There are instances where a remote control will only accept three digit codes as opposed to four digit codes. If this is the case you will have to remove the first zero off of these codes and only add the last three numbers instead.

I hope this solved your problem and thank you for using FixYa.

May 12, 2011 | Sony Flat Panel Televisions

1 Answer

I need to know if a magnavox DVD Player/VCP DV200MW8 is capatible with a Sony RMVZ320 universal Remote Control


universal remote controller for sony is not compatible to magnavox dvd player or even to other brand because SONY company, mostly of their design is only intended for SONY product or unit.

Apr 30, 2011 | Flat Panel Televisions

1 Answer

Need codes for a magnavox dvd player


Please provide the make and model of the remote too. Each remote manufacturer and model uses different coding. Many TV's now have universal settings, to which you need to look in the book from your TV to program the remote for your DVD player.

Apr 24, 2011 | Flat Panel Televisions

1 Answer

I need the code for the espn college gameday remot for my sylvania tv and magnavox dvd player


Sylvania tv: 007, 008, 009, 017, 085, 093, 116, 124, 128, 215, 218, 230

Magnavox dvd: 027, 066, 085, 117, 195, 198

Apr 05, 2011 | Flat Panel Televisions

1 Answer

I've recently bought a Sony DVD/ CD player DVP-SR650P. Its accessoies includes a remote RMT-D187P. The remote does not have an open/close/eject button. How to eject the disc tray with the above DVD player...


There is no eject etc button on the remote control because what use would it be? To insert or change a disc, the operator would have to be in reach of the drawer with a disc to hand.

Mar 06, 2011 | Flat Panel Televisions

1 Answer

Is there a vizio code for Sony dvp-sr200p?


I tried 03 on the SOny DVP-SR200P remote and it worked on our visio tv

Jan 08, 2011 | Flat Panel Televisions

1 Answer

Need code for my sony dvp-sr200p to a insignia tv


Many remote control codes can be found at InsigniaProducts.com. Search for your product model number and click on the Support tab.

Jan 14, 2010 | Insignia 42" LCD Flat-Panel HDTV

1 Answer

I have a Sony CD/DVD player DVP-FX810, and after putting in disc, it spins, but I've got no picture or audio. Any ideas?


It appears your player is not configured to TV. Switch on the TV and switch on the DVD. Insert the DVD/CD disc. Press the input button on the TV remote control. Keep pressing till you start viewing the picture. It generally depends to which video in put you have connected the input cables from DVD

Nov 28, 2009 | Flat Panel Televisions

Not finding what you are looking for?
Philips 32PF5320 32 in. HD-Ready LCD Television Logo

417 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Flat Panel Televisions Experts

The Knight
The Knight

Level 3 Expert

68323 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

 Grubhead
Grubhead

Level 3 Expert

4590 Answers

Are you a Philips Flat Panel Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...