Having initially installed a Tesco print cartridge, i decided to install an officlal HP45 into my hp psc 950, but it won't do anything and still says "Error: Incorrect Black Ink Cartridge Installed". Any thoughts?
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
there is a microchip located at the front base side of the toner cartridge which the printer reads when initializing, if the chip is non responsive then the printer will assume no print cartridge is installed- This does happen quite frequently - please contact your toner supplier and inform them of the fault and they should replace free of charge if they are a reputable firm.
10.000x Supply error E-label cannot be read or print cartridge is not properly installed. 10.0000 = Black print cartridge 10.0001 = Cyan print cartridge 10.0002 = Magenta print cartridge 10.0003 = Yellow print cartridge 1 Reinstall print cartridge. 2 Turn on the printer. 3 If the problem is not solved, replace the cartridge.
Some printer brands have a cute scheme that reads a "new" cartridge as good, but the refilled one has a small fuse link that is burned out by the printer. Try factory new cartridges. Unplug the printer power for a bit to reset the printer.
I have the same issue where the printer displays "Right cartridge Incorrect". However, it's had no problems up until about two weeks ago and I've had the right cartridge in place for about a year or so.
HP Color LaserJet 2600n Printer - Installing Print Cartridges
When a print cartridge approaches the end of useful life, the control panel displays a message
recommending that to order a replacement. The printer can continue to print using the current print
cartridge until the control panel displays a message instructing to replace the cartridge.
The printer uses four colors and has a different print cartridge for each color: black (K), cyan (C),
magenta (M), and yellow (Y).
Replace a print cartridge when the printer control panel displays one of the following messages:
Replace yellow cartridge, Replace magenta cartridge, Replace cyan cartridge, Replace black
The control panel display also indicates the color that should be replaced (unless a
genuine HP cartridge is not currently installed).
Change the print cartridge
Turn off the printer.
Open the front door.
Do not place anything on the transfer belt (ETB), which is located on the
inside of the front door.
Remove the used print cartridge from the printer.
Remove the new print cartridge from the bag. Place the used print cartridge in the bag for
Grasp both sides of the print cartridge by the blue handles and distribute the toner by gently
rocking the print cartridge from front to back.
Do not touch the shutter or the surface of the roller.
Remove the orange shipping locks and the orange shipping tape from the new print cartridge.
Discard the shipping tape and shipping locks according to local regulations.
Align the print cartridge with the tracks inside the printer, and using the handles, insert the print
cartridge until it is firmly seated.
Firmly close the front door.
Turn on the printer. After a short time, the control panel should display Ready.
If a cartridge is in the wrong slot or is the wrong type for the printer, the control
panel will display one of the following messages: Incorrect yellow, Incorrect magenta,
Incorrect cyan, Incorrect black.
Installation is complete. Place the used print cartridge in the box in which the new cartridge
arrived. See the enclosed recycling guide for recycling instructions.
If a non-HP print cartridge is in the printer, check the printer control panel for further instructions.
When replacing or changing a black print cartridge, a cleaning page will
automatically print. This helps prevent speckles on the front or back of printed documents.
A cleaning page can also be generated using the control panel or the HP Toolbox.