Question about Jenn-Air JGS8850BDS Stainless steel Gas Kitchen Range

Open Question

Replacing the touchpad on a Jenn Air JGS8850BDS

Anyone has instructions on how to do it yourself?

Posted by on

1 Suggested Answer

  • 1 Answer

SOURCE: Does anyone know where i can get an instruction on

I just replaced the panel overlay on my stove and that did fix the problem (of the 3,6,9 buttons not working). I found the part for under $110 on line and replaced it myself.

Posted on Nov 05, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Jenn air convection fan squeals (JGS8850BDS)


turn power off remove gill in oven remove fan blade now remove back panel and remove convection fan motor and wirers Now revere procedure to install new fan motor Cheers

May 05, 2012 | Jenn-Air JGS8850 Gas Kitchen Range

1 Answer

The display beeps has F1-F8


F1 fault code on most Jenn Air ranges usually indicates a problem with the electronic control or its touch pad. If the symptom persists with the touchpad totally disconnected from the control, it would usually point to the control as the cause. If the symptoms stop with keypad disconnected, the touchpad would usually be suspect. On models where the keypad and electronic control are one integral part, the whole control will usually have to be replaced if there's a problem in either parts. BTW. On some models an F1 failure code can also be triggered by a problem in the oven temperature sensor or its wiring circuit. The most common sensors are usually in the area of 1100 ohms when at room temperature so testing it before replacing any parts might be a good idea to be on the safe side.

Oct 30, 2010 | Jenn-Air JGS8750ADB Gas Range

1 Answer

Can you convert this oven from natural gas to propane?


Yes - I believe it comes with the new jets that you need to change out. Not that hard to do really; we did it ourselves.

Oct 11, 2010 | Jenn-Air JGS8850BDS Stainless steel Gas...

1 Answer

6 buttons on my control panel do not work.


Possible failure of the control panel, possible failure of the lead cord.
There can be dirt accumulation for the contact loss or a failure due to prolonged use.
Replacement is the only other option if cleaning does not work.

Sep 24, 2010 | Jenn-Air JGS8850BDS Stainless steel Gas...

1 Answer

Oven flame will not go on. Broiler flame working


The problem is usually the igniter not reaching the correct amp draw .When the igniter does not reach the correct amp draw it may allow the gas valve to partially open or not open at all. The igniters are inexpensive and easy to replace. There is a video at http://appliancehelponline.com/gasoventroubleshootvideo.html this will walk you thru the correct procedure for performing this test. It may be a different model but the testing will be the same.You can also enter your model # for diagrams and illustrations of your specific model. Not all models are available. All parts come with installation instructions.

May 31, 2010 | Jenn-Air JGS8850BDS Stainless steel Gas...

1 Answer

Does anyone know where i can get an instruction on how to replace the touchpad on a Jenn Air JGS8850BDS gas range/stove? hhkk_kh@yahoo.com


I just replaced the panel overlay on my stove and that did fix the problem (of the 3,6,9 buttons not working). I found the part for under $110 on line and replaced it myself.

Nov 05, 2009 | Jenn-Air JGS8850BDS Stainless steel Gas...

1 Answer

Right side of the key pad doesn't work (Numbers 3,6,9)


I have the similar problem.. Only portion of the keypads work. I had a guy come out and take a look and he said that I need a new touch panel which would cost me ~$450.. I am trying to find parts on-line to fix it myself.. let me know if you find one.

Jun 21, 2009 | Jenn-Air JGS8850BDS Stainless steel Gas...

1 Answer

Jenn Air SVE47600b dead touch panel and blower runs constantly


I have had similar problems:
Display was the Part # 71001799 circuit board..$175+labor
Oven blower problem was control relay board, part# 12001689...$224+labor
My solution. replace with non-Jenn Air.
Check Consumer Reports. Jenn Air has high repair history.

Mar 14, 2009 | Jenn-Air SVE47100 Slide-In Electric...

Not finding what you are looking for?
Jenn-Air JGS8850BDS Stainless steel Gas Kitchen Range Logo

Related Topics:

100 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jenn-Air Kitchen Ranges Experts

Mike Carew

Level 3 Expert

969 Answers

Dan Webster
Dan Webster

Level 3 Expert

8205 Answers

 Fix Your Board
Fix Your Board

Level 3 Expert

310 Answers

Are you a Jenn-Air Kitchen Range Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...