Question about Philips Magnavox 51MP392H Rear Projection Television

1 Answer

Power light comes on and goes right off

Magnavox model 8p6044 c101 with a chassis ptv 810 ah01 The tv was working fine when my daughter said it didnt work. I replaced the fuse and still have same problem. When power button is pushed the power light comes on and goes right off with no picture or sound except for a little tiny pop in the speakers. I have looked over the boards but dont see anything burnt or damaged, not that i would know if i seen it

Posted by on

  • dj70s80s May 11, 2010

    Is this a rear projection (picture tube type tv) ?

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Contributor
  • 38 Answers

Take a look at the blue round capacitors. They stand on end and about the size of a dime and 1/8" thick. They should be by the highvoltage transformer. That's the plastic box with a spark-plug wire sticking out the top. The circuit board should have numbers printed by the parts. Look for c811 or C8** . The C means capacitor and the 800 numbers means the circuit it's in. This is a horizontal output capacitor your looking for. You will see it burnt. Might not be blue...could be yellow or orange. But you should know what kind of capacitor to look for by the description I gave. This seemed to be a problem with these sets....or atleast one problem of MANY. If it's not that, then you need big time service. I wouldn't waste your money on a Magnavox. They just don't hold-up to repairs very well. If you find the burnt part, let me know what the location is...C8**....and I'll tell you what the value is. You won't beable to read it if it's burnt. Now atleast you know what your looking at. Sometimes if you have someone turn the set on while you look at the board in a dark room, it will spark. Hope that helps. Good-luck.

Posted on Dec 24, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Magnavox rear proj (model# 8p6044 c102) pic is cloudy/green tint


Yes the coolant gets crud buildup in it over time which will cause the color and clarity to get very poor with obects that will glow around certain bright ojects. You can get the Phillips CRT coolant replacement kit from www.tvrepairworld.com which has the CRT coolant for all 3 CRTs and also includes the Cd with instructions on how to do the replacement.

Mar 27, 2010 | Projection Televisions

1 Answer

Magnavox projection tv model 8P6044 C102 is very


The CRT fluid is cloudy and should be replaced. Goto www.TvRepairKits.com. They have a kit to do it yourself.

Ed

Jun 21, 2009 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

Power light comes on and goes right off when turned on


Thoses sets have alot of problems. Personally,I don't fix them any more because they just don't hold-up to repairs and one thing after another go bad on these sets. Most notable is the small digital "daughter board" on the left side of the set. It slides on the main board on edge like memory for a computer. Those are $350.00 if you can find them. Don't waste your money on this set...please!! I've been a T.V. repairman for over 20 years. Put your money elsewhere....and buy an extended warranty!. Stick with Hitachi,Pioneer,Panasonic,Sony or the real Sharp sets. Sharp used Funai for the low end sets. Nothing lasts anymore,but with the above mentioned sets,atleast you have a chance on getting service/support when trouble comes. Most everything else is disposable...no parts available. Do your homework before buying and don't EVER buy "Made in China".

Dec 22, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

I HAVE A PHILLIPS MODEL 50P8341 REAR PROJECTION TV THAT COMES ON ,THE RED POWER LIGHT BLINKS FOR A SECOND AND THEN CUTS ITSELF OFF


Try the power supply. Look on the one in your TV for the part number ; mine is PH3501705441. I ordered one from partstore.com and it was less than $60 shipped. Hope this helps, mine works fine now........and I have a 50P8342 chassis PTV 916

Dec 10, 2008 | Philips 50P8341 50" Rear Projection...

1 Answer

OPERATING A MAGNAVOX TP3170 C101


i would try the magnavox website,just go to support or customer service and they should have a manual there.if not let me know how you make out.

Dec 07, 2008 | Philips Magnavox 50ML8105D 50" HDTV DLP TV

1 Answer

MAGNAVOX 50 INCH REAR PROJECTION Hor. Output Tran Keep Going Out


Try checking some of the tunning and coupling capacitors around the horizontal section as well for some crystalized solder joints in that area.

Jan 06, 2008 | Philips Magnavox 51MP392H Rear Projection...

1 Answer

Remote Control for Magnavox Big Screen TV (PTV 705-AH01)


sgtdar, list the model & chassis number (located on back of tv), if set is old the universals won`t work because as more newer sets come out they delete the older ones because the chip in the remote will only hold so many codes, BMW Rider

Dec 12, 2007 | Projection Televisions

2 Answers

Dim picture


If decide to do yourself, ya only have to do the green and blue ones, the red light spectrum won't allow fungal growth. Pull whole CRT assembly out to prevent spilled/leaking glycol from onto lower main boards

Sep 04, 2007 | Philips Magnavox 51MP392H Rear Projection...

Not finding what you are looking for?
Philips Magnavox 51MP392H Rear Projection Television Logo

156 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips Projection Televisions Experts

matt martin
matt martin

Level 3 Expert

1191 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

The Knight
The Knight

Level 3 Expert

68172 Answers

Are you a Philips Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...