Question about Gestetner DSm645 Digital Imaging System

2 Answers

Sc546 on a gestetner dsm645

The copier is displaying this code. Please advise on what it could be

Posted by on


2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Gestetner Master
  • 990 Answers

Dear sir; SC546 the problem onheating unit either thermister connection loose or fusing unit connection loose, if there have any problem let me know, if this information resolve your problem, please be generouse give me a good rating.thank you.

Posted on Dec 23, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

You will have to call Serivce to reset the code or to replace parts on this unit. That SC code is one that will not reset with the flick of a switch. It is a hard stop to the copier. Serivce by a rep is the only way to get your copier back to normal.

Posted on Jun 08, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Could you please send me the keys code for dsm 645 copier

On the display the message came up to call for service with the code SC546what can I do to fix it myself. the machine is not working for printing. machine is ricoh modle SDm645

Jan 22, 2013 | Gestetner DSm645 Digital Imaging System

1 Answer

Gestetner dsm645 error code sc548 solutions of free

SC548 is fuser belt rotation error, check the 2 sensors on the left hand side of the copier (as you look at where the fuser is located). These get knocked & moved out of postion, I think they have been modified, but I don't have the part number, sorry. Allso check the firmware is up to date.

Feb 19, 2011 | Gestetner DSm645 Digital Imaging System

1 Answer

Gestetner dsm645 error code sc548

The machine cannot detect the fusing.
Fusing unit is not installed. Try to put the fuser in the place.

Feb 18, 2011 | Gestetner DSm645 Digital Imaging System

1 Answer

I have Gestetner DSM622 SP, Iam getting Errer code SC546, can someone explain me thanks

sc546 is a fuser temperature detect error. One or both of the thermistors most likely need to be cleaned or replaced, but you will have to go into service mode to reset the code once you do that. You should contact your local service technician or Gestetner dealer, as they can easily fix that problem.

May 13, 2010 | Gestetner DSm622sp Digital Imaging System

1 Answer

How do you install an ethernet card on a gestetner DSM645 copier/

Are you trying to install an ethernet or "NIC" card in order to turn the machine into a printer? If so then you need more than a nic card. You would also need a ROM chip, Print controller, Hard Disk Drive and the buttons for the control panel.
If you are just replacing a NIC and expanding the memory then that is possible but the instructions to do so would be more than could be typed up here.

Jan 16, 2010 | Gestetner DSm645 Digital Imaging System

4 Answers

Gestetner 2822 error code e-5

i got a strait black thin line on left marging of paper. i think margin setting of my Gestetner 2822 has been changed. but i don't know how to fix this problem. (107-C, ???)

Nov 11, 2009 | Gestetner DSm645 Digital Imaging System

1 Answer

How to code the DSM645 M5

this is not simple or easy. go to user tools.go to system settings. go to address book management. add new user. add code. allow which options to be used. hit ok to store.

Oct 21, 2009 | Gestetner DSm645 Digital Imaging System

1 Answer

Plz help

Did you try to diconnect the finisher or sotor from the copier? Is the error code a E 900. You may have a problem with your finisher. It can also be the hard drive on the back of the copier, it is used with the finisher. Try to unplug the finisher with the power off and tur it back on.Will that fix the problem for now.... Get back to us

Jan 24, 2009 | Gestetner DSm645 Digital Imaging System

4 Answers

Help with code sc546

need model.but in most it's a fuser prob.

Jul 05, 2008 | Gestetner DSm645 Digital Imaging System

Not finding what you are looking for?
Gestetner DSm645 Digital Imaging System Logo

Related Topics:

442 people viewed this question

Ask a Question

Usually answered in minutes!

Top Gestetner Office Equipment & Supplies Experts

Adorjani Laszlo

Level 3 Expert

1297 Answers


Level 2 Expert

398 Answers

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6573 Answers

Are you a Gestetner Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides