Question about One For All Projection Televisions

1 Answer

Cannot find codes for One For All remote

I have just bought a URC-7562 remote but cannot get it to work with any of the following equipment, Bush ITV2100 television (quite old), Humax PVR-9200T and Lenoxx Sound HT-600 DVD. I tried the codes in the instruction book and I tried the code search but no result. Can someone help?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Just had the same problem with the humax pvr-9200t
found VCR1794 & SAT1808 work most of the standard buttons.
the codes need to be downloaded from oneforall.

Posted on Jul 29, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is a universal remote code to a phillips remote




Hi,

Please go to below website you can get the codes to programme out remote.

http://www.urc.philips.com/

Please follow the below instruction.

1.Location
2.Select your remote
3.On your left side you will have an option called as REMOTE CONTROL CODE FINDER.

9f4dce2.jpg 4.Select the device you need to programme and the make of the device you will get the codes.

Thanx

Jul 27, 2010 | Toshiba 42H81 42" Rear Projection...

1 Answer

I need the codes for the one for all remote urc-3220 please reply asap.


I can help you with your URC-3220 Universal Remote Control issues.

The codes for JVC TV's is:0053.

For complete instructions on entering the URC-3220 remote codes, please refer to my posted Fixya Tip One For All URC-3220 Code Entry.

I hope that helps.
_______________________________________________
One For All URC-3220 Manual
One For All URC-3220 Code List
One For All URC-3220 Code Entry
One For All URC-3220 Code Search
One For All URC-3220 Reassign Key

May 07, 2010 | JVC HD-52G787 52" Projection Television

1 Answer

The remote control is not working no matter what I do


If your tv brand is not listed most univeral remotes have a manual code search. You should go through that mode. May take a long time to find the code. If this doesn't work u may have to find a different universal remote

Apr 21, 2009 | Projection Televisions

1 Answer

TV CODES


The following code: 253 will work on Sky remotes for the following tv: 
 
Bush LT42M1CFA
Bush LT32M1CA

Sep 12, 2008 | Projection Televisions

1 Answer

The one for all remote control model urc-7562 funtion on the menu doesnt work what could be the problem?


Hello Stephendo394:
Here are some advanced codes that were found on Remote Central.com web site.
003 Menu
004 Timer Recording
010 Timer Recording
024 Shutdown
026 Shutdown
036 Skip 30 sec
039 Next Page in Menu/Next Track in Play mode
041 Previous Page in Menu/Previous Track in Play mode
043 Time Slip
053 Record
055 Play
061 Right
065 AV
070 NTSC/PAL
076 Language Right
080 Language Left
084 Source
091 Source = SD
100 Playlist View
101 AV
105 Tape Speed
106 Advanced
116 5
117 1
118 7
119 3
120 6
121 2
122 8
123 4
124 Setup
127 Picture Info
140 ?
146 Record
148 Channel Down
152 Channel Up
162 HDD Management
164 Delete
178 Record Flexi-Mode
179 Source = DVD
180 Rewind
181 Returns to Menu
182 Pause/Play
183 Rewind
184 Forward
185 DVD In/Out
187 Forward
189 Context Menu
191 Enter
192 Up
193 Return
194 Left
197 Guide
198 Info
215 ?
219 ?
229 Create Chapter
230 ?
234 Display
245 9
249 0

Aug 20, 2008 | Projection Televisions

1 Answer

I bought an rca universal remote for my sylvina tv model number 6420ff, I can not find the code number for it.The package said it would work on a sylvina tv.


I own a One-for-All universal remote (model URC-4220), and my booklet says the setup code for a Sylvania TV is one of the following numbers: 0030, 0054, 0171, 1944, 1963, 0675, 1268, 0821.
Hope these numbers help you out. Please take a moment to rate this info, by using the rating system below. Thanks.

Jul 13, 2008 | Projection Televisions

1 Answer

Need to program remote for TV and DVD both are Panasonic, and i have the original remote. Thank You


I own a One-for-All universal remote (model URC-4220), and my booklet says that the setup code for a Panasonic TV (with a built-in DVD) is 1490. If your TV and DVD are two separate pieces of equipment, which are hooked up together, then the setup code is either 0051 or 0250.
Hope these numbers help you out. Please take a moment to rate this info, by using the rating system below. Thanks.

Jul 12, 2008 | Panasonic Projection Televisions

1 Answer

I've just bought the URC-7210 TV controller. It worked well at first but a few keys didn't match their desciption so we decided to follow the set-up instructions. Now nothing works at all. No box is...


You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
If it hasn’t, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

Thank you for using FIXYA!

Cheers!
IrishDruid

May 03, 2008 | Projection Televisions

1 Answer

I need the 4-digit code for a oneforall remote control model#urc-433-cb02


You can find the remote control codes for difrent brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
If it hasn’t, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

Thank you for using FIXYA!

Cheers!
IrishDruid

May 02, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

328 people viewed this question

Ask a Question

Usually answered in minutes!

Top One For All Projection Televisions Experts

L Pfaff
L Pfaff

Level 3 Expert

11573 Answers

Tom Chichester

Level 3 Expert

24452 Answers

Are you an One For All Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...