Question about Televison & Video
I was on to one of your experts yesterday in regard to my question. I followed the instruction he/she sent me, but I encountered a problem right at the very start. When I pressed the start and stop buttons simultaneously as instructed no language selection box appeared, so, I couldn't proceed any further. Can any one help?
If you are looking for region code unlock, then it is not possible as its firmware issue and can't access firmware in player.
Posted on Dec 22, 2008
Go to http://www.wrang.com/hitachi/Hitachi_DVPF3E.htm
Download the two files and burn them on CD-R disk. Follow the procedure below:-
Connect DVD to TV. Switch ON your Combi from the Standby Button on the right and choose DVD Output from the first button two inches right of the DVPF3E clock LCD display
Open tray and put the < DVPF3E Hack > CD on the tray WITHOUT closing it !!!!!!
Press "9", "8", "7", "6", "SEARCH MODE" and “OPEN/CLOSE/EJECT” buttons in succession from the remote.
The Firmware Upgrade will inform you its progress on TV.
Wait for about 5 to 10 minutes and CD tray will open automatically
Un-Plug from Mains and then power ON again.
Your Hitachi DVPF3E is now Multi-Region
Kind regards and Merry Christmas
Posted on Dec 22, 2008
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Tips for a great answer:
Dec 24, 2015 | One For All Televison & Video
May 06, 2008 | Televison & Video
Jan 12, 2014 | Hitachi CLU-5713TSI Remote Control
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insertmedia (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
Use the Manufacturer's Codes to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again
 Aimthe remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY
Jul 03, 2011 | One For All URC4220 Remote Control
Aug 10, 2009 | Symphonic WV806 DVD Player/VCR
Feb 20, 2009 | Hitachi DV-PF73U DVD Player / VCR Combo
Dec 24, 2008 | Televison & Video
Apr 11, 2008 | Panasonic DMR-EZ47V DVD Recorder/VCR
Aug 19, 2007 | One For All URC-3021 Remote Control
50 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: