Question about HP PSC 1210 All-In-One InkJet Printer

1 Answer

Cannot align print cartidge on HP PSC 1315

Have tried a hundred alignment sheets as it prints a new one each time it boots up. I align the sheet to the lower front edge of the glass just like it shows and press the scan button, it always pops up a window and says " pen alignment failed, improper sheet " or the equivalent of this. Any ideas ?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem. i think mine centers around the fact that i refuse to spend the money to buy a color cartridge. i believe the alignment sheet must be in full color.
i did find a very strange solution to preventing the alignment page from printing, but i haven't tried it yet. http://h30434.www3.hp.com/t5/Printer-All-in-One-Software-and/Alignment-Page-HP-PSC1315-prints-every-time-printer-is-turned-on/m-p/224243
not a solution, but it might help...

Posted on Feb 18, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My HP PSC 1350v prints a test page every time I turn on the printer?


Bet you recently replaced a print cartridge!

That model of printer recalibrates after any cartridge replacement.

Let one of those sheets print out in full. Read what is on the sheet. Place the sheet on the scanner
and press the button that the sheet indicated to be pressed. The printer will go through a alignment
cycle then quit. Once that is finished you should not have to do anything till the next time your change
a print cartridge.

Mar 22, 2011 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

HP PSC 1315 All-In-One. Just changed ink cartridge, but prints dim and blurry.


Try taking the cartridges out clean them Unplug the power cord from the back of the printer while the printer is off and let it be unplugged for 60 secs Plug the power cord back in and wait for the 30 secs and then insert the ink cartridges it would try to print the alignment sheet... plz complete the alignment and it should work properly after that

Oct 21, 2010 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Alienment sheet prints every time I print a page.


just put the printed alignment test page paper on scanner glass and press the scan button to complete the process. It is alignment process which is printer is doing for self testing after installing new cartridge. Just finish the process.
. It is necessary to after aligning the page it need to scan with the scanner. Otherwise it keeps pop up.
Hope this helps. Please rate my response.
Thanks.
Have a good day.


Have a nice day and do not forget to rate please...!

Mar 15, 2010 | HP PSC 1315 All-in-One Printer...

3 Answers

Everytime I turn my PSC 1510 on it prints a test page, I have new cartridges in how can I stop it...it using all my ink unnecessarly:-(


yes, when you get test page face down the page on sccaner and press scan button after some time you get green light still, further u don't get test page again.

Jul 08, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Alignment sheets spitting out when turning on the computer


Replace all ink carts with new GENUINE HP carts. Your machine is not seeing ALL colors.

Jan 31, 2009 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

HP PSC 2210 print cartridge won't align


Press and hold the Setup button.
Press the Options button. The printer should be ready to print.

Nov 24, 2008 | HP PSC 2210 All-In-One InkJet Printer

1 Answer

Alignment sheet prints---cannot print anything else


u will have to first scan the alignment paper in your scanner this will solve your problem

Nov 14, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Not responding to PC instructions to print data


Hi,

You need to load the PRINTED ALIGNMENT PAGE on the scanner glass, then press on "OK" button. It should start scanning the alignment page. That way, you are completing the PROCESS of ALIGNMENT.

Thank you so much.

adonscott

Jul 01, 2008 | HP PSC 1315 All-In-One InkJet Printer

1 Answer

Ink Cartridge Alignment


On alignment sheet, do you see a line of yellow blocks?
And on next line do you see alternate block and yellow blocks?

(Without these, alignment fails)

If not, change the colour cartridge, re-print the page and repeat alignment.

Good luck...

May 26, 2008 | HP PSC 2110 All-In-One InkJet Printer

1 Answer

MY test page always prints


Hi,

I belive that after replacing the INk cartridges, you are experiancing this problem. The Alignment test sheet always prints everytime you turn on the printer, if u haven't completed the Alignment process.

To complete the Alignment process,
>>Once the printer finished printing the Alignmnet test sheet.
>> Place the Test sheet staright on the scanner glass facing down towards right hand corner.
>>Press the scan button(color), the Power ON light will start flashing, wait until it stops flashing.
>>Alignmnet process completed.


Thank You

Feb 09, 2008 | HP PSC 1315 All-In-One InkJet Printer

Not finding what you are looking for?
HP PSC 1210 All-In-One InkJet Printer Logo

Related Topics:

741 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

k24674

Level 3 Expert

7987 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a HP Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...