Question about Whirlpool GBD307PD Electric Double Oven

1 Answer

Oven Won't Work!!

I just noticed that the display panel on the front of my oven is blank. When I press keys some of them beep - when I open the oven the light will come on, but the clock part is not working and I can't seem to turn on my oven. The only key that appears to be working on the panel is the Oven Light key - the light in the oven will come on when pressed. I tried resetting the breaker and that didn't make any difference. Any other ideas?? This happened suddenly, I did not receive any error messages on the display prior to the oven not working.

Posted by on

  • 6 more comments 
  • Anonymous Jun 02, 2008

    My mom has a Whirlpool Self-Cleaning Oven. It is not a double oven - just a basic stove oven. I'm sorry, but I do not have the model number. All of the electric burners work on the stovetop, but the digital panel is blank (dark - no read out) and the oven will not work. We do not want to buy a new stove...HELP!

  • agedad Aug 28, 2008

    I just noticed that the display panel on the front of my oven is blank. When I press keys some of them beep - when I open the oven the light will come on, but the clock part is not working and I can't seem to turn on my oven. The only key that appears to be working on the panel is the Oven Light key - the light in the oven will come on when pressed. I tried resetting the breaker and that didn't make any difference.

  • moorematt Oct 01, 2008

    elecric panel is not working

  • ovenbroken Nov 11, 2008

    I have the same problem.  Clock went out and light still worked. Then clock would come on and oven would work.  Then go off again, etc....  Had a company come out and they said I needed to replace the clock board ( $ 300.00 later) he told me when they replace this board almost always, the control panel needs to be changed too.  He put the new board in and sure enough the new board would not read the existing control panel.  So now they want another $ 150.00 to fix that.  This seems very strange to me.  Is the tech putting in the boards wrong?  Why would the new board not read the existing parts?  What should I do?

  • mdunn255 Dec 03, 2008

    Display is blank . Power is on. Nothing works except oven light

  • thefuller976 Jan 07, 2009

    I have the same problem, it just started today with our double oven, out of the blue

  • gtnewton5 Jan 30, 2009

    I have the same problem. The oven display just went out and when I try to press a button it just beaps at me. Can DIY's replace the electornic module or do you recommend a repair person?

  • faxon Jan 30, 2009

    No display at all, lights go on inside, oven tries to start, no idea of temperature, oven shuts off convection fan. checked breaker, of course. If I get it repaired, how long will the next one last? This was new three years ago!

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Expert
  • 87 Answers

Replace the elecronic module

Posted on Jun 10, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Have a Whirlpool Gold Accubake Double Oven. After a power outage, the display is dark and ovens are not responding to keypad. Lights work both from doors and keypad. Directions?


Hello!
This blank display is a common control board problem. If the buttons beep when pressed, then the control board is getting adequate power. If the buttons beep.. and your oven light still turns on when the oven door is open.. this a text book control board failure. We at Fixyourboard.com can solve this problem for you, and back the remanufacture with a two year warranty.

GBD RBD Whirlpool Oven Problems Causes and Solutions

Feb 20, 2017 | Whirlpool Ovens

1 Answer

WHIRLPOOL double wall oven has a blank control screen the start button is the only button that beeps


Their is a small in line fuse going to the oven control. Service manual
6b484ffa-e6f8-4c65-aa67-df87a903038a.pngPage 4-2 shows how to get to it. Radio shack has the fuses

If you need further help, reach me via phone at https://www.6ya.com/expert/dan_73bbd84fe1d95b61

Nov 24, 2013 | Ovens

1 Answer

My whirlpool double oven accubake GBD307PDS09 display went blank!!!! HELP!


Hello!
This blank display is a common control board problem. If the buttons beep when pressed, then the control board is getting adequate power. If the buttons beep.. and your oven light still turns on when the oven door is open.. this a text book control board failure. We at Fixyourboard.com can solve this problem for you, and back the remanufacture with a two year warranty. GBD RBD Whirlpool Oven Problems Causes and Solutions

May 03, 2017 | Whirlpool GBD307PD Electric Double Oven

1 Answer

Our home has a Whirlpool Gold built-in convection oven. The home is @5 years old. We've lived here for one year. Today, the display had an error message (E6). After we cleared the error message, the...


Hello!
This blank display is a common control board problem. If the buttons beep when pressed, then the control board is getting adequate power. If the buttons beep.. and your oven light still turns on when the oven door is open.. this a text book control board failure. We at Fixyourboard.com can solve this problem for you, and back the remanufacture with a two year warranty.
GBD RBD Whirlpool Oven Problems Causes and Solutions

Apr 21, 2017 | Whirlpool GBD307PD Electric Double Oven

1 Answer

Whirlpool Accubake System Mod.# RBD275PB10 front panel blank


GBD RBD Whirlpool Oven Problems Causes and Solutions

Hello Edward!
This blank display is a common control board problem. If the buttons beep when pressed, then the control board is getting adequate power. If the buttons beep.. and your oven light still turns on when the oven door is open.. this a text book control board failure. We at Fixyourboard.com can solve this problem for you, and back the remanufacture with a two year warranty.

May 13, 2017 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Dislpay is blank but oven works


HI, you will need to replace this faulty ECC. the chip set that is soldered on this board is damaged as well as the led display. replacing the Electronic Clock Control will fix this issue.

the control board is fine and this explains why the oven is still functional. its the ECC that is faulty.

Click here to purchase your new ECC online.

May 25, 2009 | Whirlpool RBD305PD Electric Double Oven

2 Answers

Touch pad does not work and flashed FO


FO- the touch pad is faulty. replace the eoc(electronic oven control)

May 17, 2009 | Kenmore Ovens

2 Answers

Whirlpool RBD305PD has error F2E6 error on control panel


When this code appears and display is going blank too, it is always the control board. The only option is to buy a new one or get it repaired. It can be fixed quickly and reliably. www.fixyourboard.com

Apr 02, 2009 | Whirlpool RBD305PD Electric Double Oven

1 Answer

Oven emitted black smoke and F7 beeping on display


F7 stuck keypad
Stuck keypad may mean relay is turned on.
Determine if problem is with the Key Panel or Control by:
1. Pushing CLEAR/OFF pad.
2. Disconnecting Ribbon Cable from control and waiting at least 32 seconds to see if Code recurs

If code recurs, problem is in the control. Replace control.

If code does not recur, problem is with the Key Panel.

Mar 30, 2009 | GE Profile JK915 Electric Single Oven

2 Answers

Random beeps, oven almost starts itself


The touch pad may be defective. There is a membrane behind the buttons that will cause problems like that. The only cure is to replace the touch assy.

Sep 11, 2007 | GE Profile JKP18 Electric Single Oven

Not finding what you are looking for?
Whirlpool GBD307PD Electric Double Oven Logo

705 people viewed this question

Ask a Question

Usually answered in minutes!

Top Whirlpool Ovens Experts

Sal De

Level 3 Expert

2699 Answers

Oloyede Monsuru

Level 3 Expert

1417 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Whirlpool Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...