Question about JVC AM FM CD DET FACE CAR STEREO

Open Question

'error' message on jvc stereo cd player

Displays 'error' when trying to play cd. stereo part works fine.

Posted by on

  • jeep runner Dec 22, 2008

    Hi. It's a cd player, am/fm cassette player, original to the jeep.

  • hall205 May 11, 2010

    you mean radio bit works fine but cd just desplays error is this just a cd player or are we talking about a cd changer etc? need more info

×

5 Suggested Answers

  • 883 Answers

SOURCE: CD WONT PLAY

guessing that your laser diode or drive motor or laser sled has stopped working...need more info...

Posted on Jun 01, 2007

SOURCE: I HAVE A JVC KD-G321 CAR RADIO/CD PLAYER

I've got the same problem too. Have you managed to solve it?
I've tried to reinitialize the stereo by pressing the the pin button but that didn't have any effect.

Cristian

Posted on Jul 04, 2008

SOURCE: Pioneer automotive stereo cd player error 11

I have the same problem now too. It shows up error 11, 12 or 17. I tried using a cleaning CD but did not work. I think the lens needs to be replaced.

Posted on Aug 06, 2008

  • 1 Answer

SOURCE: JVC CD player won't turn on, but will eject CD and display time.

Make sure the red wire is still connected or make sure the red wire hasn't been severed. Also, check the fuses located in the engine compartment. The red wire connects accessory terminal in the fuse block. Also check the fuses in the cabin. This fuse box is typically located on the driver's side, at knee level, next to the door panel, and underneath the dashboard. As a last resort, the unit can be taken to an authorized or factory service center.

Posted on Feb 01, 2009

  • 232 Answers

SOURCE: JVC car stereo won't play cd

If it does it with any cd and it played before you have to clean the lense or laser. Get a cd player laser cleaner disk or cd. If you still have problems take the radio fuse off in the fuse block to restart it. Remove the fuse wait five minutes then reinstall. Also some times when you burn CDs in the wrong format the cd player will not recognize them.

Posted on May 14, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

Tip

Some information of DVD player for Audi A6


Audi always be a kind of luxurious and comfortable car, but the technological develop fast , the original function can't not meet the driver need now. So the special made Audi A6 DVD player come out. There is some information of Audi A6 DVD player for you.
The outlook of Audi A6 DVD player match the Audi completely. People will not think that the Audi A6 DVD player is not the original DVD player. The resolution of 800*480 will display the high effect of picture for you. The operation system and capacitive touch screen always make the operation easily.
The Win CE operation system can be operated easily. The Audi A6 DVD Player can react quickly. And the you can play audio and video by most of format. It will provide a high quality display for you. The Bluetooth function also help people a lot. If you want to connect some device you can find USB port in the side of Audi A6 DVD player which is the place you reach easily. you can surf by WiFi and 3G internet.
Hope these tip can help!
Audi A6 DVD Audi A6 Navigation Audi A6 GPS Audi S6 Navigation Audi RS6...

on Jun 17, 2014 | Car Audio & Video

1 Answer

Where can I find the connections the go on the back of the stereo


Usually behind the stereo in the console. Either a square or rectangle in shape. You can obtain adapters for differing units that allows the use of the original wiring harness without rewiring. Just a simple plug and play option.

Jan 01, 2015 | Car Audio & Video

1 Answer

My 2002 mazda mvp ausio system is not working but I can insert and eject the CD but cannot do the in tape cassette also the display is not showing the clock or any thing plz any one tell me whats wrong...


Internal board damage. Also the ribbon cable for the soft load on the cassette is not engaging. This can happen due to just ware from the age of the unit. Cold solder joints are usually the culprit, that is why the display will not light. Check yards for a newer used deck it just might be easier unless you have a shop you can send it to.

Nov 10, 2014 | Car Audio & Video

1 Answer

Can't switch to the auxiliary


try useing it.. plug your aux cord into whatever your using (mp3 player) as maybe your radio won't switch to aux until it senses that there is audio being played through the input aux cord?

Mar 20, 2013 | Car Audio & Video

Not finding what you are looking for?
JVC AM FM CD DET FACE CAR STEREO Logo

Related Topics:

184 people viewed this question

Ask a Question

Usually answered in minutes!

Top JVC Car Audio & Video Experts

Radames Pagan
Radames Pagan

Level 3 Expert

196 Answers

kakima

Level 3 Expert

98762 Answers

xxxxxx xxx

Level 3 Expert

4724 Answers

Are you a JVC Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...