Question about Kenmore 62622 Microwave Oven

Open Question

Kenmore micro keeps resetting itself

I have a kenmore 72180592400 microwave over the stove. My wife did something yesterday and now it continues to reset itself. It keeps asking for the time to be input, which i do, then it clicks and resets itself asking to input time again. If i put something in to cook or warm, it will run for a few seconds and then stop, again asking for time to be input on clock. when i open the door, i can hear it click and reset itself again. I cannot figure where or how this was plugged in either. thanks for any assistance

Posted by on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 100 Answers

SOURCE: microwave stopped working completely

Fan turned on after cooking because a thermostat got to hot and tripped turning on the fan to try to cool the unit.  The unit went completely dead when thermal fuse tripped which is located above the cavity on the left side.

Posted on Oct 31, 2007

Ad
sharcnet
  • 2130 Answers

SOURCE: Kenmore elite microwave

Does the digital display light up at all? Is it completely dead? Are you sure it has power? Have you tried another outlet? If the outlet is good and the unit is completely dead, the internal fuse may have blown. You can try to take the cover off (with the unit unplugged) and look for a blown fuse. Try replacing the fuse with an EXACT fuse of the same rating. Try plugging the unit back in again and see if the unit comes back on. If not, you may have a power supply issue or defective Magnetron.

Please let me know what you find and we'll go from there.

Good Luck,
- Jim

Posted on Jan 28, 2008

MicrowaveSvc
  • 9098 Answers

SOURCE: thermador microwave from oven/micro/warming drawer

The first thing I would suggest is a hard reset. Unplug the unit for a minute or so. Then plug it back in, set the clock and try again.

Let us know if the hard reset does not fix it.

Posted on Aug 21, 2008

ginko
  • 19396 Answers

SOURCE: What does -F6- code stand for?

F6 means a problem in the control circuit board.
Try unplugging the microwave with the door open, then plug it back.
Try the solution that you find here, if it does not work the panel must be replaced.

Posted on Sep 10, 2008

MicrowaveSvc
  • 9098 Answers

SOURCE: Microwave won't function.

This is usually caused by either a bad door switch, a loose door switch mount (which are pretty simple problems to fix) or occasionally a problem on the control panel.

Even though a door switch clicks, it may still be bad inside.

Door switch or mount trouble is usually caused by slamming the door or by opening the door while it's cooking without hitting the Stop pad first.

There are plastic mounts inside the microwave which hold the door switches and onto which the door latches lock when you close the door.

The screws on these mounts may be loose. If they get too loose, the switches will not be activated properly.

Sometimes it's a broken tab on the switch holder, allowing the switch to rotate just out of position. This tab can be hard to see, since it is under the bottom edge of the switch.

If you or someone you know decide to look into it, we have critical information on safety, disassembly and door switches at our site, and our link is at our listing here on FixYa:.

Also see http://www.microwavedisplay.com/doorsw.txt

You can usually find exploded views and order parts by entering your model number at the Sears parts site.

A full Sears/Kenmore model number has 3 digits, a dot, then 8 more digits, such as ###.########

There may also be a "mini-manual" hidden inside the unit behind the control panel or hidden on the left side behind the grille, which is very helpful when troubleshooting & testing.

If you only need a switch, you can order a universal type here for $5 postpaid.

If you think the problem is on the control panel, we repair these nationwide by mail for $39.95 postpaid in most cases.

We're happy to help you with free advice and we'd appreciate your thoughtful rating of our answer.

Posted on Dec 08, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

The vent will turn on randomly and not turn off!


Most over the range microwaves have a heat safety system built into them. If for instance you are cooking on the stove top for a long period of time on the burner directly under the micro control panel and the control panel get too hot, a thermostat in the microwave will automatically turn on the vent fan to help keep the control panel cooled off. My guess is that the safety thermostat (usually right behind the bottom of the control panel) may be going bad and needs replaced.

Apr 03, 2015 | Kenmore 30" Microwave Combination...

1 Answer

Fan comes on by itself and won't turn off.


Is it a micro hood? If so, and you're cooking on the stove below, it may be that the microwave is getting too warm. Some of them have an automatic fan the comes on when you're cooking below them - especially when boiling potatoes or something else steamy.

Feb 01, 2015 | Goldstar Mv1502b Microwave Oven mv1502b

1 Answer

Kenmore elite microwave troubleshooting


My GE microwave buzzes at times but otherwise works just fine.

Jan 20, 2014 | Microwave Ovens

1 Answer

Ge profile micro wave above stove 1850SM2SS will not heat turn table works and lights work


If you know DMM then only you can fix it. Check magnetron continuity and the transformer continuity. Mostly magnetron blows up. Danger microwave has 5000 volts in it Thanks Discharge capacitors

Nov 13, 2011 | GE JVM1850 1000 Watts Microwave Oven

1 Answer

Yesterday while using the stove top to cook some chili the lights under the microwave blew out with a loud "pop". It tripped the breaker switch so I reset it and everything works like it should except the...


Well I'm reaching here---if the bulb did not fracture/break then it sounds like a capacitor popped--check your owners manual for reset button but I don't think there is one for the lighting---In addition if you can see the circuit board--look for burn spot or wet spot. GL

Sep 18, 2017 | Kenmore 80412 Microwave Oven

1 Answer

No Power


HI, there is a inline fuse located inside the microwave ion the power supply board. check for continuity. replace the fuse if necessary. if the fuse is OK, replace the power supply board.

Jun 01, 2009 | Kenmore 62702 Microwave Oven

2 Answers

Noise while not running


don;t worry;
all you need to do is lubricate the fan bearings with light machine oil and make sure the fan is not hitting anything

Apr 18, 2009 | Kenmore 63682 / 63684 / 63689 Microwave...

1 Answer

How do you remove a microwave above the stove


Take the glass tray out and unplug it. Remove the 2 or three phillips screws in the top of the cabinet going into the micro. They should be towards the front. Hold up on it while removing screws. When all screws are out, let it tilt forward and lift it up off of the hooks. Some require help, so be carefull and put blankets on your stove to set it on when it first comes out.

Apr 10, 2009 | Kenmore 63762 Microwave Oven

Not finding what you are looking for?
Kenmore 62622 Microwave Oven Logo

Related Topics:

47 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kenmore Microwave Ovens Experts

William Miller
William Miller

Level 3 Expert

9098 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Chuck

Level 2 Expert

228 Answers

Are you a Kenmore Microwave Oven Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...