WE HAVE A GARLAND CONVECTION OVEN, AND WE ARE HAVING ISSUES GETTING THE OVEN TO RUN. IT IS SUPPOSED TO GO ON AUTOMATICALLY WHEN THE DOOR IS CLOSED, AND FOR A WEKK OR SO IT WAS BEING TEMPERAMENTAL, BUT EVENTUALLY RUNNING...BUT NOW IT IS NOT WORKING AT ALL. BUT THE FAN SEEMS TO WORK FINE IN COOL DOWN MODE.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If it's getting hot, but it isn't cooking as fast as normal, your convection blower/fan may be out. If you can hear the fan running, but the oven isn't getting hot enough, then you most likely have a heat element or thermostat problem.
Fan and blower problems tend to be a bit more common with convection ovens.
well this is different, but sounds like fun. I would just Repair the gas griddle you have. from the sound of it you need to replace the 3 or 4 tstats that control the griddle. If you are in a Metro area you can find a dealer for Robert Shaw and get the parts you need. but you may also start at http://www.garland-group.com/. everything there will be newer but you will be able ask about where the data plate is and then get parts lists. call a small comercial kitchen repair company and ask for help there too.
This is usually an indication that either the motor capacitor is bad or the start centrifugal switch in the motor is bad or, possibly both. Spinning the motor bypasses the starting process. Capacitor are fairly inexpensive, I'd do that first. If start switch is bad, motor has to be replaced. Not a cheap motor either.
LETS SEE LOOKS LIKE A GARLAND CONVECTION OVEN OR BLODGET, ANY WAY THERE IS A DOOR SWITCH UNDER THE LOWER PANEL MAY JUST NEED ADJUSTING OR A SWITCH. MY ADVICE IS GO ONLINE TO THE MANUFACTURE AND LOOK UP YOUR MAKE AND MODEL AND YOU CAN GET A PARTS BREAK DOWN FOR THIS UNIT WITH PART NUMBERS
IF YOU HAVE ANY PROBLEMS WITH THIS E-MAIL ME YOUR MAKE AND MODLE AND I WILL BE MORE THEN HAPPY TO GET THE BREAK DOWN. firstname.lastname@example.org