Question about Televison & Video

1 Answer

Blue shadows & black screen with flashing red light

1st problem-The tv goes black with no sound and red on/off light flashes, the tv makes a clicking sound. It will do that just once in while, but it getting more frequent and for long periods.

2nd problem- The top half of the tv started to have a blue shadow under the words and it looked like the people had blue hair. now it's doing that on the whole screen and you see some yellow shadows. We thought it need cleaning. We did that and got a clearer screen, but still have shadows like the colors aren't aligned.

Posted by on

  • 1 more comment 
  • diduni Dec 22, 2008

    It's a 2002 Hitachi ultravision projection Model #53uwx10ba

  • diduni Jan 14, 2009

    I've replaced the convergence IC's and didn't see any burnt resisters. I thought the TV was fixed, It seemed to be fine for about 5 days and then it went black again with the flashing red power light and the clicking noise. It's done that a couple times, for a few minutes each time. Can you help?

  • tvguy171
    tvguy171 May 11, 2010

    What kind of tv is it? Ineed a manufacturer and a model number and then I can accurately answer your question

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 106 Answers

Your problem is the convergence IC's (part number STK392-110). They will need to be replaced as well as matbe a couple of burned resistors that will be right by the IC's. Due to the complexity of this repair as well as the alignment required after the parts are replaced. you may want to contact a tech. Let em know if I can be of further assistance. You can find a local tech by going to the homepage of FIXYA and inputting your zip.

Posted on Dec 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Trying to replace lamp in HDTV and having trouble. Does not function correctly after putting in new bulb. Boots up and then visuals go black and the green power light keeps flashing. Help?


Panasonic DLP TV Bulbs

Make sure its an original Osram or Philips bulb inside the housing. If its a cheap lamp it will act this way. If it is an original lamp, then you may have a power supply issue. It shouldn't affect your TV but you may want to try resetting the lamp timer by following the instructions that came with the lamp.

TY-LA1001 Timer reset

While pressing the VOL- button on the projection display, hold down the number 0 button on the remote control at the same time for more than 5 seconds.

Aug 15, 2015 | Panasonic Pt-52lcx16 Projection Television

1 Answer

Toshiba Cinemax HD TV I have sound but a black screen - red light flashing?? Help!


I need to know the model number to know if I can help or not.

Dec 16, 2012 | Televison & Video

1 Answer

I have a Panasonic PT-52LCX66 television that I bought just over 4 years ago. I have replaced the bulb for the second time just 3 months ago and now the set will just shut off after about 3 minutes of...


Tv making and have clicking sounds as tv shutdown as lights flashes?Yes.The board that call the Ballast board might be dying and dead soon.This Ballast board job responsible only are to ingnite the tv projection lamp only.

Jun 30, 2011 | Panasonic PT-52LCX66 Projection Television

1 Answer

Picture loss after picture begins to flash. blue and yellow light


Most likely the lamp is dying. Try replacing the lamp before calling a repair tech. What does the Owners manual say about the blink lights?

Oct 01, 2009 | Toshiba 62HMX84 62" Rear Projection HDTV

1 Answer

Weird blue flash when tv turns on or off


TV will need service soon, blue CRT is on its way out, will need replacing

Mar 25, 2009 | Sony KP-51HW40 51" Rear Projection...

1 Answer

Sony 57" rear prijection TV has a fast flashing light and will not turn on


turn on tv, after a few minutes picture goes black, but still have sound. red light blinks 5 times,turn set off same thing happens when you turn set back on. some times it want do it for 10 min.

Apr 25, 2008 | Sony KP-57WS500 57" Rear Projection...

2 Answers

Tv screen stays black with the blue light and two red lights blinking


I have the same problem, if anyone has a solution PLEASE mail me at macry2121@aol.com

Apr 04, 2008 | Hitachi UltraVision CineForm 55VG825 55"...

5 Answers

No picture but has sound


My LG TV
switch on no picture but short period of sound then nothing

Jan 20, 2008 | Sony KP-51HW40 51" Rear Projection...

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69845 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6393 Answers

yadayada
yadayada

Level 3 Expert

64034 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...