Question about Samsung HT-TX72 Theater System

1 Answer

Home Theater Audio System System

Did you ever fix your problem with the receiver shutting off from "protection"?

Posted by on

  • Anonymous Jan 13, 2009

    i have the same problem

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Samsung Master
  • 19,396 Answers

Protect mode will kick in whenever a fault is detected.

You get the unit not powering up, and sometimes you hear a clicking noise, that is the protection switch that keeps shutting down the unit.

Causes that can start protect mode are:

Electrostatic harges on internal circuits.
Leave the unit unplugged for power for one hour or so, this will allow discharge.

Bad speaker wiring.
Check speaker wiring, try unplugging and plugging back, or start after removing one speaker at the time.

Internal fault.
Internal fault is the natural cause for protect mode. If all the above did not work, then the problem is a blown component or an internal fault. In this case the unit must be taken apart , tested and repaired by an experienced person.
If the unit is less than one year old, or if you want to get service, call Sony at the phone number listed on the product documentation.

Regards.

Posted on May 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why when we whatch movie the system off in few minutes?


Samsung Home Theater HT-X40 - Shut Down on Protection ...

craftsman-hambs.blogspot.com/.../samsung-home-theater-ht-x40-shut-do...
Sep 5, 2009 - Samsung Home Theater HT-X40 - Shut Down on Protection Problem ....My system even sounds a little better now but that could be because I ...

I have a Samsung HT X40 DVD Home Theater. The problem ...

www.justanswer.com > Consumer Electronics
Question - I have a Samsung HT X40 DVD Home Theater. The problem ... Turn off the power and hold the STOP [] button for longer than 5 seconds. This reset all ...

Samsung Home Theater System HT-X70 "Protection ...

www.manualsonline.com/.../samsung/...system/protection-problem-shut-...

Jan 01, 2016 | Samsung HT-X40 System

1 Answer

HW-C560S AV Receiver message display PROTECTION. I unplugged and plugged back in and still PROTECTION message. Is it time to take to shop? I know nothing about electronics.


Your set is in trouble my dear friend.
Protection will appear because the processor sense that you have a faulty parts on your unit.
To avoid further damaged, your system shut it off automatically.
The main reason is your Power amplifier I.C., it is shorted,need a replacement.
I"ve strongly adviced you to look for a qualified technician or electronic shop to fix your problem.
Good day!

Jan 02, 2011 | Samsung HW-C560S Theater System

1 Answer

Protection Error


maybe the audio amplifier IC´s are in bad conditions and need to be replaced

Jun 30, 2009 | Samsung HT-X20 Home Cinema 600W Theater...

1 Answer

Once switched on, PROTECT appears on screeen and system turns off


When your home theater's display reads PROTECTION, it means the home theater is over heating and the unit will shut down to prevent any damage. This can happen if the unit is stacked along with other electronic devices or the unit is in an enclosed area that prevents the unit from cooling properly. To decrease the chance of overheating, relocate your home theater to a more open area.



If the home theater display reads PROTECTION every time you turn it on, no matter where or how the unit is placed, it needs service. To set up service call Samsung Customer Care at 1-800-SAMSUNG (1-800-726-7864). Have your model number and serial number on hand to set up service.

Jun 29, 2009 | Samsung HT-DS1000 System

1 Answer

Dvd home theather system


The audio amplifier IC are fried and need to be replaced

Mar 31, 2009 | Samsung HT-X40 System

3 Answers

Problem "protect"


Hey guys, just had the same problem and found out it was because I had disconnected the central speaker. This it was creating a back impedance or something and reonnecting did the trick! i.e. check your speaker connections and check that they work... duff speakers could cause the problem too!

Sep 20, 2008 | Samsung HT-TQ85 Five DVD 5.1 Channel Home...

1 Answer

Dvd home theather system


when you turn it on, hold the power button until it has fully loaded

Sep 02, 2007 | Samsung HT-TQ85 Five DVD 5.1 Channel Home...

Not finding what you are looking for?
Samsung HT-TX72 Theater System Logo

402 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Home Theater Systems Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Brandon M.

Level 1 Expert

34 Answers

Are you a Samsung Home Theater System Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...