Vintage singer 3 pole plug wireing

Question edited for clarity, 'make model (what it is)'.

Lots of general help below. Hopefully, you won't need parts.

The handwheel and the stop motion on a vintage Singer - part ...

oldsingersewingmachineblog.com https://oldsingersewingmachineblog.com > 2012/03/10
Mar 10, 2012 - If the stop screw will go all the way in, hold the handwheel and turn the knob clockwise as far as you can.

The handwheel on a vintage Singer and the stop motion - part ...

oldsingersewingmachineblog.com https://oldsingersewingmachineblog.com > 2012/03/05
Mar 5, 2012 - Now, if you replace the stop motion clamp screw (the chromed knob) and tighten it up, you're back to normal - rotation of the handwheel ...

Stuck Stop Motion Knob & Handwheel

The Singer Featherweight Shop https://singer-featherweight.com > blogs > schoolhouse
What is the best way to remove a stuck hand wheel. I am able to remove the stop motion knob but can seem to work the hand wheel off. I have put sewing ...

SINGER HANDWHEEL REPAIR on Andy Tube

YouTube · Andy Tube 31.8K+ followers · 6 months ago The Handwheel and Stop-Motion Mechanism of the Singer Model 353 Genie. Andy Tube · 31:45. Remove Handwheel, Motor Belt and Bobbin Winder Singer ...

The handwheel and the stop motion on a vintage Singer

Pinterest · Mommygita 11 years ago Following on from the last post, we'll now look at how to replace the handwheel, or if you like the balance wheel, which is a process that ...
..

http://www.singeroriginalvintageproducts.com/Pages/SINGER227MSEWINGMACHINEWITHDROPFEEDDOGGREATCOLLECTOR.aspx


SINGER ORIGINAL VINTAGE PRODUCTS SINGER FEATHERWEIGHT 221

Without plugging in the machine does the needle go up and down when you turn the balance wheel? It could be frozen in need of cleaning and oil. If this is a recent purchase you may want to bring it to a service center. The wiring on these vintage machines can be iffy. The 301A is a great machine and we'll worth having it serviced.

It's not likely you are going to find a manual for a vintage Singer. However, the older Singers didn't change a lot from one model to the next, so you should be able to find information on multiple web sites and videos that would be helpful.

Singer Sewing Machine Company Serial Numbers

vintage Singer threading Google Search

vintage Singer user manual Google Search

old singer wind bobbin Google Search

Learn more about your machine here:

Singer Sewing Machine Company Serial Numbers

There are tons of diagrams, web sites and videos about older Singer sewing machines. A lot of them are very similar, so finding information for one will most likely be beneficial.

How to thread vintage round bobbin sewing machine Singer 99K

How to Wind Bobbin Thread Case Vintage Antique Singer Treadle Sewing...

How do you thread an old Singer sewing machine

threading antique Singer sewing machine Google Search

...

The serial number AH619154 should be on a Singer 128 series machine manufactured after April 29, 1948. Here is one manual for a related machine, a 128-3: http://www.singerco.com/uploads/download/91_127-128-3.pdf .

I hope this helps.

Cindy Wells

Any of the older Singer manuals will give you this info...here's a PDF for your machine...

http://www.ismacs.net/singer_sewing_machine_company/manuals/singer-model-201-sewing-machine-manual.pdf

If that doesn't help scroll down on this page there's a simple diagram on there.

http://blog.sew-classic.com/2009/11/30/replacing-the-wires-on-a-singer-button-foot-motor-control.aspx

the problem is that the cord that was replaced on it is too light for the sewing machine. some companies sell cords that are made with 18awg wire 18awg wire can only deliver enough electricity to run the motor sapping up all of the power from the light as soon as you push the pedal. you need to get a cord made by singer or rewire your cords with 16awg wire... 16awg wire is the standard wire for all vintage singer sewing machines it keeps the light nice and bright...... hope this helps