Question about Philips HDD120 MP3 Player

1 Answer

Usb device not recognized

Mp3 screen says flash error please backup the data and fomat the player. Also message usb device not recognized. under usb port it says unkown device and its says there is not driver installed

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 95 Answers

Turn off CPU, Unplug Power cable, And all usb devices, let it sit for about 20mins. Plug it all back in. Turn on the CPU!

Posted on Aug 12, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My ipod is not connecting to my system


Hi,you can use your iPod to a Windows and Mac, in conjunction with a USB port. Any iPod with dock connector, which has one, can be plugged into a USB 2.0 port. For a system to transmit data and provide access to information on your iPod, it is important that the system initially, we should recognize as a real device. But if your system is not, then the probability that the internal structure of the iPod is corrupted and you need to reformat. After formatting, if you have deleted the backup to restore the data youYou must use iPod Data Recovery Tools.

For example, if you connect your iPod to your Windows-based system with a USB port, you can the following error message:

"USB Device Not Recognized

One of the USB devices connected to the computer has a problem, and Windows does not recognize. For assistance in solving this problem, see this message. "

CAUSE

This error can result from various reasons, some of which are listed hereinafter

Defective USB Mass Storage Device Driver
High-speed USB ports are enabled
File infcache Problematic
Damaged the internal structure of the iPod

Solution

You should try these methods to solve the existing problems and to recognize that your iPod in Windows:

Unplug your iPod and disconnect
Disconnect iPod and connect to the system is rebooted
Put your iPod

Replace or upgrade the USB mass storage Device Drivers
Tip: Disable high-speed USB. To do this, right click on My Computer and click on "Manage" from the menu. Then click on "Device Manager" and double-click the Universal Serial Bus controllers. You can then access all the USB items that are identified as "best disabled ',' high-speed" or "USB 2.0".

Delete the file asy

If the problem persists, please format your iPod and lost data from backup. But sometimes, when the backup is not complete and updated is valid, backup should be restored. To solve these problems, should be used iPod recovery tools. IPod Data Recovery Tools are commercial tools with powerful recovery techniques designed to take to protect data, seemingly inaccessible.

Stellar Phoenix iPod Recovery is a fully equipped tool for data recovery lost data from iPod shuffle, iPod nano, iPod mini and iPod Classic. This is a read only tool that has lost everything, music,Videos, documents, images, podcasts, audiobooks and other content from iPod. This iPod recovery tools for Mac and Windows operating systems.


Have a nice day...

Mar 02, 2011 | Creative Labs ZEN V Plus MP3 Player

2 Answers

Mp3 player has an error


Hi,

Can you access the player with Windows?

Apr 27, 2008 | MyMusix PD-6070 MP3 Player

2 Answers

The Mp3 player is not formatted


the Mp3 player will be recognized when it is hooked up to the USP port but when you try to explore the memory on the player the disk is not fomatted.

Jan 14, 2010 | Nextar MA933A MP3 Player

2 Answers

Sansa view is no longer recognized when plugged into USB port


Solutions are in order of increasing probability of data loss AND device recovery.
Screen messages are loose approximations

A Soft Reset
1. Hold Power switch up for 5 seconds.
2. Screen displays "Goodbye".
3. Restart

B. Hard Reset
1. Hold Power Switch for 30 seconds
2. Restart

C. Recovery Mode
1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold Home button
4. Connect USB cable to device
5. Screen displays "USB" in small type and "16 MB Format" shows up in My Computer
6. Copy firmware files to "16 MB Format" drive letter
7. Disconnect USB cable
8. Screen displays "Firmware update"
9. Restart device

C. Force Format (This one wipes the data partition. Make sure all needed music/pictures/video exist elsewhere)

1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold top/North/up of Scroll Wheel
4. Connect USB cable to device
5. Screen displays "Format and lose data"
6. Press right/East on Scroll Wheel to confirm
7. Screen displays "Formatting"
8. Restart device

D. Manufacturing Mode (included for completeness only)
1. Hold Power Switch for 5 seconds to switch device Off
2. Move switch to Hold
3. Press and hold centre of Scroll Wheel button
4. Connect USB cable to device
5. Windows detects a new hardware device
6. ???
7. ???
8. ???

Sep 07, 2009 | SanDisk Sansa View 8GB MP3 Player - Black

1 Answer

Usb is not recognizing sansa


try going to "my computer" on your desktop and it should show an unkown device thats plugged into one of your drives

Aug 01, 2009 | SanDisk Sansa View 8GB MP3 Player - Black

1 Answer

Flash error! please backup the data and format the player


Umm... Vague, but I'll work with it. Connect it to a PC. under "My Computer", find your device, and right click it. You should see "Format Device", or "format".This will remove any and all media from the device, as well as clear your settings.

May 11, 2009 | MP3 & Digital Media Players

1 Answer

Flash Error!


iLO Mp3 Player

"Flash Error"

1. Connect the player to the PC using the USB cable.
2. Open Windows Media Player.
3. Go to the Sync or Devices tab and delete all content from the player.
4. Go to the Tools menu and select Options.
5. Select the Devices tab, highlight the ILO or Siren player and click on Properties.
6. Uncheck the box "Create Folder Hierarchy on Device"


-Tha Mp3 Doctor

Sep 27, 2008 | iLO (2 GB) MP3 Player

3 Answers

Mp3 player not working


mp3 player is showing a flash error message.Please back up the data and format the player.

Aug 29, 2008 | iLO (2 GB) MP3 Player

3 Answers

Trutech digital audio player SMP 1 GBL


I had this same problem. If I tried to turn the player on, it just gave me the "format the player" screen. If I turned it off (by removing the battery if necessary) and plugged it into a USB port, it could still be read as a flash drive. I could copy the files to a backup folder on my computer and then (using Windows) I could right-click on the drive and choose Format. When it was finished, I disconnected it from the computer and turned the player back on and it was able to boot normally (it took a little while, but it worked). After rebooting, it automatically recreated the MUSIC.LIB, MUSIC.SEC, SETTINGS.DAT system files and the VOICE directory. I plugged it back into the USB port and copied the music back onto it and it worked fine. So... back up the data and format the player...

Jan 25, 2008 | Digital Audio NAP256 MP3 Player

Not finding what you are looking for?
Philips HDD120 MP3 Player Logo

Related Topics:

103 people viewed this question

Ask a Question

Usually answered in minutes!

Top Philips MP3 & Digital Media Players Experts

Herby0802

Level 2 Expert

48 Answers

Pieter Vleeshouwers

Level 3 Expert

1423 Answers

mac colar

Level 2 Expert

421 Answers

Are you a Philips MP3 and Digital Media Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...