Question about StarTech.com StarView SV211K 2-port KVM Switch

2 Answers

Forgotten pin number

The minute the menu button is pressed the green box comes up looking for 4 pin numbers
they are forgotten
how does one reset back to factory settings

Posted by on

  • donutone Dec 22, 2008

    i am using a starview 2. when i turn on the box i have a station (lts say bbc) i want to get to the main menu so i press menu on the remote. a green box appears looking for numbers.
    2005 was the number when i got it and i believe 0000 was the original factory number. i changed all that.but forgot it.now i cant get at the main menu, let alone parent conrol.

  • robbie sperin
    robbie sperin May 11, 2010

    what kind of box are you using

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 23 Answers

1668 should get you in to it

Posted on Dec 22, 2008

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 15 Answers

Master pin code is 1668
you can now change pin code by entering prental control using 1668 as old pin code then put in new code

Posted on Dec 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

A minolta bizhub c-6500 error code c-3804


Fuser Unit Code Sensor (TEM-4)
Get into:
1."Service Mode Menu screen"
Press [03 System Setting].
2. "System Setting Menu screen"
Press [01 Software SW Setting].
3. "Software Switch Setting Mode screen"
Press [3] In the left box. Press in the middle box [1] or numeric buttons after pressing the "DIPSW number" and "Bit number" buttons.
4. In the right box change Press [On(1)] to a [Off(0)] to specify ON/OFF of the selected bit numbers.
IF THE CODE COME BACK GET A TECH OUT TO LOOK AT THIS RESETTING OVER again CAN CAUSE A FIRE AND THAT WILL RUIN A PERFECTLY GOOD DAY!!!!!!!!!!!!!!! Sensor TEM-4 may need to be replaced or cleaned or the Fuser rollers replaced

Jan 25, 2013 | Konica Minolta bizhub Office Equipment &...

1 Answer

Forgot pin code for grundig gud300hd freeview hd box


Ok this info does not seem to be anywhere so here goes.....

Grundig gud300hd and others of same build alba ect...... set top box pin reset
UNLOCK CODE1. Press MENU and go to Settings and press OK.
2. Go to Parental Control and press OK. The 'Enter the PIN Code' menu will be displayed.
3. Press i (information) button once then enter 4000.
4. Go to Change PIN Code and press OK.
5. Press i (information) button once then enter 4000.
6. When it prompts for New PIN enter the desired PIN number using 0~9 keys. Enter it again to confirm.

hope it helps

Nov 24, 2012 | Grundig Televison & Video

1 Answer

My printer is coming up with the error code 3 which is flashing. can you help please


Clear error codes

First make sure that there isn't anything keeping the carriage from moving freely.
Then follow the instructions below:

1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing

LED Codes:-


0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection

Jul 22, 2011 | Canon PIXMA MP210 Photo All-In-One Printer

1 Answer

Wast Ink absorber is full. Any solutions?


Try :

These are the steps:
1. Turn On iP1600

2. Push and Hold Resume button about 2 minutes
3. Release Resume button
4. Printer back to normal again

Or

How to clear E27 Waste ink absorber full
1.With the printer powered off but connected to a power source,
press the Power button while pressing and holding the Stop/ Reset button.
2. When the Power is lit, press the Stop/Reset button two times
while pressing and holding the Power button.
3. When releasing the Power button and the Stop / Reset button (regardless of order),
the printer will move into a service mode. (Waiting for menu selection)
4. When the on/off lights in green, press the Stop/Reset button the
specified number of time(s) according to the function listed in the table below.
(Each time the Stop/Reset button is pressed, the LED lights alternately in orange
and green, starting with orange.)

Note: press 4 times for waste ink counter reset.

The number of the Reset button pressing LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print

2 times Green EEPROM print
3 times Orange EEPROM reset

4 times Green Waste ink counter reset
5.Turn off the printer.( it must be turn off) then turn it on again


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it and give a testimonial for my response. Happy Holidays!

Thanks, Joe



Dec 25, 2010 | Canon PIXMA iP1600 Printer

2 Answers

My canon pixma mp 160 just keep on alarming, what shall i do to fix it, ty


160 resetting errors



1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks

0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection

Nov 24, 2010 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

The "Ink Absorer is full" error message is coming up when I want to print. How do I fix this?


You will need to reset your printer.
Try to follow these procedures to reset your printer.

1) With the printer powered off but connected to a
power source, press the Power button while pressing
and holding
the Stop/ Reset button.
2) When the Power is lit, press the Stop/Reset button
two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop /
Reset button (regardless of order), the printer will
move into a
service mode. (Waiting for menu selection)
4) When the on/off lights in green, press the
Stop/Reset button 4 times, the specified number of
time(s) according to the
function listed in the table below.(Each time the
Stop/Reset button is pressed, the LED lights
alternately in
orange and green, starting with orange.)note: press 4
times for waste ink counter reset.

The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset

5) Turn off the printer.( it must be turned off)
then turn it on again.

Aug 31, 2010 | Canon PIXMA MP160 All-In-One InkJet...

3 Answers

Ink absorber full Canon MP210


(11/24)
<Service mode operation procedures>
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)


(11/24)
<Service mode operation procedures>
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print See APPENDIX 1:
SHIPMENT INSPECTION
PATTERN 1: PRINT
SAMPLE
2 times Green EEPROM print See APPENDIX 2:
EEPROM INFORMATION
PRINT
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection

(12/24)
<Destination setting procedures>
At Logic board replacement, make settings for each destination.
The number of the Reset
button pressing
LED Destination Paper for defaulte setting
0 time Green No change
1 time Orange Japan A4
2 times Green Korea A4
3 times Orange US/Canada Letter
4 times Green Europe A4
5 times Orange Australia A4
6 or more times Returns to a menu selection A4
<Waste ink counter reset procedures>
At the waste ink absorber replacement, reset the waste ink counter for the replaced waste ink absorber.
Setting operation for the waste ink counter (The counter setting value is selected by pressing the Reset button.)
The number of the Reset button
pressing
LED
0 time Green Reset the main waste ink counter to 0%.
1 time Orange Reset the platen waste ink counter to 0%.
2 times Green Reset the Main & platen waste ink counter to 0%. (Reset
collectively.)
<Button / LCD checking operation procedures>
At Operation panel unit replacement, check the button / LCD.
1. When pressing the Stop button two times, the machine will be moved into an LED confirmation mode.
2. As often as the Color button is pressed one time, each LED is lit one by one, and the machine get in the mode in which each
button is acceptable.
3. As often as each buttons on the panel is pressed from the left to the right, the displayed number is counted up.
Pressed button Display
Maintenance 1
Fit to Page 2
SCAN 3
Paper size 4
+ 5
Black 6
Color 7
Stop / Reset 8
On / Off 9
4. When all buttons are pressed, [1] will be displayed. Then, LED[8.5 x 11 Plain Paper] and LED[8.5 x 11 Photo Paper] will be lit on
the panel, and the machine will be in a service mode menu selection mode.

May 20, 2009 | Canon PIXMA MP210 Photo All-In-One Printer

2 Answers

My printer ink absober was full. my printer display e27 code. what can i do?


hi,
CANON PIXMA MP160 All-In-One InkJet Printer
has few common problems. Such as Driver CD lost, Scanner does not work, Connection problem etc. For find all these software solution just click here....
75aba9d.jpg3f22050.jpg

http://www.canon.com/printer/prob676ijt65/solution

prirweto-i-9

Apr 07, 2009 | Canon PIXMA MP160 All-In-One InkJet...

1 Answer

E3 error message


Dude,

E3 refers to Paper Jam :)

this may come in handy:
Service mode operation procedures -
1) With the printer powered off but connected to a power source, press the Power button while pressing and holding
the Stop/ Reset button.
2) When the Power LED is lit, press the Stop/Reset button two times while pressing and holding the Power button.
3) When releasing the Power button and the Stop / Reset button (regardless of order), the printer will move into a
service mode. (Waiting for menu selection)
4) When the LED lights in green, press the Stop/Reset button the specified number of time(s) according to the
function listed in the table below.(Each time the Stop/Reset button is pressed, the LED lights alternately in
orange and green, starting with orange.)
The number of the Reset
button pressing
LED Function Remarks
0 time Green Power off
1 time Orange Service pattern print
2 times Green EEPROM print
3 times Orange EEPROM reset
4 times Green Waste ink counter reset See waste ink counter reset
procedures below.
5 times Orange Destination setting See Destination setting
procedures below.
6 times Green Print head deep cleaning
11 times Orange Button / LCD checking
12 or more times Returns to a menu selection
îäíàêî, äëÿ ôóíêöèé 4 è äàëåå åñòü ïðèìå÷àíèå : òîëüêî äëÿ àçèè.
à âîò â îïèñàíèè ôóíêöèè 3 åñòü : Reset except for the
followings:
- USB serial number
- Destination setting
- Waste ink counter ...


Turn it upside down and than check.....same error code or diff.


Any help, can buzz me nytime ...


Thnks.

Jan 05, 2009 | Canon PIXMA MP150 All-In-One InkJet...

1 Answer

Wharfedale digital orb twin phone


TO REGISTER A HANDSET

[At the base]

1. Press and hold the the PAGE button on the base station for at least 3 seconds. You have 90 seconds in which to register a handset.

[At the handset]

2. Press MENU and scroll to ADVANCED SET and press MENU
3. Scroll to REGISTRATION and press MENU
4. If necessary scroll to display REGIST.BASE and press MENU
5. BASE 1 2 3 4 is displayed and the registered base number is flashing.
6. Enter the number of the base you wish to register to your handset. If you have only 1 base station, press 1. If you have 2 base stations, press 1 or 2, etc.
7. When the display shows PIN---- , enter the base pin.
8. When the handset is registered to the base it is assigned a handset number.

If you have forgotten your PIN you will need to:

Reset your ORB

1. Press MENU, scroll to ADVANCED SET and press MENU
2. Scroll to RESET UNIT and press MENU
3.CONFIRM? is displayed. Press MENU
[NOTE: Entries stored in the phonebook and new answering messages are retained. You PIN will return to the Default setting 0000]

To Set the PIN

1. Press MENU and scroll to ADVANCED SET and press MENU
2. Scroll to PIN and press MENU
3. Enter the current 4 digit master PIN and press MENU. [Default setting is 0000]
4. Enter the new PIN and press MENU

Hope this has been helpful!

Rob

Dec 28, 2008 | Uniden Cordless Phone

Not finding what you are looking for?
StarTech.com StarView SV211K 2-port KVM Switch Logo

Related Topics:

333 people viewed this question

Ask a Question

Usually answered in minutes!

Top StarTech.com Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

loftys0504

Level 2 Expert

191 Answers

john1601

Level 1 Expert

27 Answers

Are you a StarTech.com Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...