Question about Husqvarna Viking 1

2 Answers

As I am sewing the tension seems to tighten up until the thread breaks. It will sew fine the suddenly it starts to knock and I know the top thread will break any second. I am quilting free hand. I have finished about 1/3rd of my quilt and this just started. However for quite a while I have been having trouble filling the bobbin. It starts out fine but about half way it binds up and will completely stop. Since this seems to be tension related I thought both problems might be related.

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have a problem the back fabric keeps puckering when it is stitched..... I have tried changing the thread also the stitch length and tension

Posted on Oct 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I gave up and I am taking it to the repair man.

Posted on Dec 23, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I fix a bobbin tnesion problem>


Bobbin tension is one of the biggest problems most sewing machine operators have. Check information sent for assistance on this.
25793730-oz2yud5bprgbwui4kftuv1us-1-0.jpg

25793730-oz2yud5bprgbwui4kftuv1us-1-2.jpg

Jul 23, 2015 | Sewing Machines

7 Answers

TIming Consew 210


I am not sure about this particular machine but in most machines there will be a nob on the front loose low numbers like 0 1 -2 work well on number 3. If the nob is not on the front check and see if it is on the side.

Aug 27, 2008 | Consew Sewing Machines

2 Answers

Tension starts out fine, then as I sew it tightens up and the thread will not pull through and breaks the thread


Ihave a brother industrial machine that used to break the the thread because the tension of the thread was too high.There is a little spring loaded tensioner ontop of the machine thad a nut that could be screwed down to increase tension. As this was a little too tight as Isewed and the thread was pulled around the centre post it would tighten up and the thread would snap.
I think that you must check to ensure that the path of the thread on top of the machine is one that does not introduce too much friction. any tension adjusters should be experimented with
Good Luck

May 29, 2015 | Sewing Machines

1 Answer

Top thread breaks


The needle thread breaks
1. the needle thread is not threaded properly
2. The needle thread tension is to tight
3. The needle is bent or blunt
4. The needle is incorrectly inserted
5. The needle thread & the bobbin thread are not set under the presser foot when starting to sew
6. the threads were not drawn to the rear after sewing
7. The thread is either to heavy or to fine for the needle
8. The needle is not the correct one for the fabric
9. Rethread the machine

Apr 18, 2012 | Sewing Machines

1 Answer

Necchi 535FA--the tension seems to be off. The thread keeps breaking or pulling out of the needle. When i sew on cotton it was working then when I switched to a stretchy faux crushed velvet the tread...


Good day!

please try this simple tips:

Good day!

A sewing machine operator can often help themselves when their machine does not operate properly.
Here are some simple instructions, which if properly used can save time and mechanics service calls.
TROUBLE;UPPER THREAD KEEPS BREAKING;
This could be trouble;================Do this;
1.Top tension to tight================loosen tension 1 turn
2.Machine improperly threaded=========check threading
3.Thread twisted on guide post========"
4.Thread twisted out of tension======="
5.Take up spring bent or broken=======Check action of spring
6.Thread jumped off pull off finger===Check threading
7.Needle bent or burred===============new needle
8.Bad cone of thread==================try another cone
TROUBLE;LOWER THREAD KEEPS BREAKING;
1.Bobbin tensionspring to tight=======Loosen tension slightly
2.Bobbin threaded wrong===============check threading
3.Bobbin wound to tight or uneven=====try new bobbin
4.lint or thread on bobbin case=======clean inside case
5.Lint or thread inside hook==========clean inside hook
6.Bobbin case nicked bent or burred===check/change case
TROUBLE;MACHINE STARTED SKIPPING STITCHES;
1.Needle bent or burred===============change
2.Needle set in crooked===============Check
3.Thread jumped off take up spring====check threading
4.Thread jumped off pull off finger===check threading
TROUBLE STITCHES SHOWING LOOPS;
1.Forming loops on top of cloth=======Tighten bobbin tension
======================================or loosen top tension.
2.forming loops on bottom of cloth====Tighten top tension
3.Bobbin placed in case incorrectly===remove and replace
4.Bobbin thread slipped from under====check threading of
tension===============================bobbin case
5.Lint or thread in top tension=======clean between tension discs


Thank you and good luck.

Jun 06, 2011 | Sewing Machines

1 Answer

THREAD GET BUNCHED UP UNDERNEATH THE FABRIC, THE STICHES SEEM TO BE INCOMPLETE THE TOP LOOKS GOOD THAN I TURN IT OVER AND THE THEAD IS BUNCHED AND LONG LOOPS OF THREAD ARE LEFT. THANKS LOU


Hi Lou! This sounds like a tension problem--the tension on the top thread is too loose. Try using different color threads on the top and bobbin, then carefully rethread everything. Stitch a couple of inches and check the underside. If the top stitches look fine and the bottom ones are loose and loopy, and with the pressure foot down, tighten the tension. Move the knob or dial (whichever you have) just a little bit. Sew a couple of inches more, and recheck. Continue to sew and recheck, gradually tightening the tension, until you see little if any bobbin thread on the top or top thread on the underside of the fabric.

Let me know if this helps, ok?


Robbie

Jan 27, 2010 | Singer Sewing Machines

1 Answer

Singer 301a...sews on top of fabric nicely...bottom is just loose loops of thread...it's like the bobbin is not sewing...I put 2 different colors in to see...top is perfect...on bottom of fabric I see the...


This is a tension adjustment problem. It's good to use two different colors of thread, like you did. From your description, the top thread (needle thread) tension needs to be tighter. As you tighten the tension of the top thread, you'll see that the top thread pulls the bobbin thread up into the fabric so it's no longer laying loose on the bottom of the fabric.

You'll need to have the pressure foot down when you tighten the tension. Tighten it a little, sew a practice seam, check to see what the stitch looks like. Tighten it a little more, sew, check, etc etc--until both top and bottom look the same--you shouldn't see much (if any) of the bobbin thread color on top of the fabric or the top thread color on the underside.

Let me know how this works for you, ok?


Robbie

Jan 25, 2010 | Singer Sewing Machines

1 Answer

Thread jammimg on the underside when sewing


This is usually caused by the machine being out of sync. The first thing I would try is a brand new needle. Even a slightly bent needle can cause this problem. Make sure the needle is in correctly and tight. Next make sure you treaded the machine correctly, making sure that thread goes into the top tension properly. The top tension should be calibrated to be in the middle. I would slowly turn the handle making sure the stitch looks proper. From there try tightening or loosening the tension until the loops on the underside start to get smaller until they look tight but not too tight or you'll start breaking the top thread.
I would use a standard 14 needle with some standard medium weight cotton to calibrate the unit.
Hope this helps. Let me know your results

Aug 23, 2009 | Euro-Pro 416 Mechanical Sewing Machine

1 Answer

Breaking Thread


Use a bigger spool stopper to keep the thread from catching in the **** on the thread spool.
sewman7

Dec 22, 2008 | Husqvarna Viking 1

1 Answer

Tension problems (?)


Well, I could have written this. I bought a used model from a repairman about a year ago. I have a Model 537FA and I'm going to throw it out in the rain leftover from TS Fay if I don't find some kind of help. :) I'm thinking it's a tension issue, but I can't seem to find a fix.

Does your tension on your top thread sometimes tighten to impossible to move in the middle of sewing. I know that mine does this and it causes the top thread to break. I don't know what's causing the bobbin mess.

Maybe someone will help us? Please!

Aug 23, 2008 | Sewing Machines

Not finding what you are looking for?
Sewing Machines Logo

138 people viewed this question

Ask a Question

Usually answered in minutes!

Top Husqvarna Sewing Machines Experts

Douglas Plant
Douglas Plant

Level 2 Expert

165 Answers

Bargain Box
Bargain Box

Level 3 Expert

1388 Answers

Richard Roth
Richard Roth

Level 3 Expert

9472 Answers

Are you a Husqvarna Sewing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...