a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US. click here to Talk to an Expert (only for users in the US for now) and get all the help you need. Goodluck!
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The most likely culprit is a slow shutter speed. If the subject moves while the picture is being taken, you'll see it blur. If non-moving objects show up sharp while the moving objects are blurred, then this is definitely it.
Another possibility is camera movement. Try putting the camera on a tripod or a table or other steady support, then use the self-timer to take a picture. If everything in the picture is blurry, then this is probably the reason.
The third possibility is that the camera isn't focused on the subject. Try taking a picture of the subject when it isn't moving and see what happens.
With the camera's power off, remove the memory card.
Turn on the camera's power.
Retrieve the photos, as you ordinarily would do, were the memory card still in the camera. If you have the USB cable connected, then you can move the photos to your PC's hard drive, using either the camera's software, or Windows Explorer.
When operating any digital camera, the camera tries to capture the best focus and exposure for that particular scene. By pressing the shutter button half-way down, the focus and exposure is being set. There will be a green circle on the upper left hand corner of the screen, then your camera is ready to take the picture. Slowly depress the shutter the rest of the way down to take the picture.
Also try to reset the camera back to factory defaults as there could be a setting that is causing the images to be blurry. To reset the camera - have the camera in shooting mode - go to Menu - left arrow to reset and press ok. Highlight yes and press ok. This will reset the camera back to factory settings. See if this clears up the blurry images.
Assuming your SP 550 UZ is similar to the 510 UZ "RAW Mode" is not available in "Auto" or any of the "Scene" modes. If you set your camera to "P" and then access the Image Quality item in the Menu RAW is available as an option.
Hope this helps.
If the Camera is capable of Multishots then the manual will tell you how.
Taking pictures of fast moving object depends on what sort of result you require.
If you wish to 'stop' the object with a blurred background then with the camera of P setting simply pan [swing] with the object as it moves and press the shutter when in centre- So with lets say a fast car come from right moving to left[the the other way] point far right ans move with the car as it comes to your centre click but keep moving your swing.
But there is no substitute for practice and experiment
If you check out a review site such as www.steves digi cams. com or even the Canon site to check out the spec of the camera to discover what shutter speeds are available.
When shooting fast moving subjects try panning the camera on the object as you press the release this will[to a degree] keep the primary image sharp[ish] whilst blurring the background