Question about Jl Audio 1000/1 Car Audio Amplifier

2 Answers

Jl audio amp 1000/1 fix

I was wondering if you have a way to fix the output on this amp. My amp turns on fine and everything look fine but there is no sound coming out. Im pretty sure its the rca inputs on the amp. Is there a way to fix or bypass it to check it? Any help would be greatly appreciated. You can email me s2nviceprez@aol.com

Posted by on

  • Anonymous Feb 24, 2009

    exact same problem with my 500/1 and exact same problem with my 1000/1 today. sadly, smoke came out of my 500/1, i'm not exactly sure what had happened to my 1000/1 though. i've spoken to many people on forums and one specialist had told me that if the power light comes on, but there is no output, that means the power supply has failed.

  • Anonymous May 12, 2009

    The damn 1000/1 comes on but theres no sound coming from the outputs. It doesnt make sense that its a bad power supply because if it was a bad power supply it wouldnt come on right? Some one tell me whats wrong.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My 1000/1 jl audio amp is turning on but it gives me the low ohms light and i dont have no subs connected what can it be?

Posted on Jul 26, 2011

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 13 Answers

IVE HAD 2 JL 1000/1S DO THIS TO ME EACH TIME ITS TURNED OUT TO BE A SHORT IN THE RCA IMPUT BUT ALSO CHECK YOUR RCA CABLES AND THE SUB INPUT ON YOUR HEADUNIT

Posted on Aug 05, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bridging two12" subs and one 15" sub to my Rockford fosgate T 1500bd amp


assuming all 3 subs are 3-4 ohms, running all 3 in parallel (the 3 positive leads all attach to the amp positive terminal, and all 3 speaker negative leads connect to the amp negative terminal) will bring you at or above 1 ohm, which the amp is capable of handling. With 1500 watts, you will want to use 8 gague power leads for the amp, 12 gague speaker cables, and an inline 120 amp fuse between the amp and the battery, within 1 foot of the battery.

Jan 11, 2017 | Rockford Fosgate Car Audio & Video

1 Answer

Just bought a car with this stereo. Was working fine and then I accidentally was messing around trying to figure things out and put it in demo mode. Now it's stuck!! Can someone please help?!?!


With the stereo on, hold the large round button in to get to setting menu. When it gets to that, I believe clock adjust comes up first, just turn the knob to get to demo mode and then push the button in. Turn the knob to switch demo off and then push it again. That should do it.

Jan 10, 2017 | Car Audio & Video

2 Answers

I have a Sony STR-KM7 AMP and the subwoofers have stopped working?


Sorry but it sounds like the subwoofer voice coil has shorted, you will need to replace the sub.

Jan 08, 2017 | Sony Car Audio & Video

1 Answer

So how do wire this set set up to a bridged amp any help would be appreciated


assuming that is a dvc dual 4 ohm speaker, and you have a 2 ohm bridged amp, you run a positive from each side of the speaker into the bridged positive of the power amp, and run a negative from each side of the speaker into the negative bridged terminal of the amp. if, indeed, you have 2 4 ohm voice coils, running them bridged in parallel wiring will bring the load to 2 ohms. if you have 4 voice coils, of 4 ohms apiece, you could run all 4 parallel into the amp, but that would bring the load down to 1 ohm, and you would have to make sure you8r amp can support 1 ohm operation.

Jan 07, 2017 | Car Audio & Video

1 Answer

How do I reset a Kenwood KDC-24BU that is flashing "PROTECT"?


Replace the blown/shorted amplifier output Mosfets that are causing it, and it will then be happy to reset itself :)

Jun 01, 2014 | Car Audio & Video

1 Answer

Fm works, am does not


Check the antenna connection. A poor connection will often be good enough for FM but make AM reception so bad the the radios auto-gain circuits will mute the output unlike old AMs that would just produce loud static in poor signal conditions.

Apr 17, 2014 | Car Audio & Video

1 Answer

1992 GOLDWING RADIO SPEAKERS NOT WORKING


All you can do is trace the wiring back from the radio to the speakers, there is no quick fix here. To test the speakers touch a battery to the two contacts, the speaker will pop if it is any good.

Nov 06, 2012 | Car Audio & Video

2 Answers

No power to amp


check and try finding another grounding spot

May 16, 2010 | Lightning Audio B4.250.2 Car Amp

3 Answers

Lightning audio b150.2 as soon as +12 is hooked up blows 25 amp fuse and the c2 1000uf/35v capacitors blow???????


Disconnect all speaker connections and rca cables. Leave power, ground and remote wires intact. Try turning on again. If you still have a protection light your amp is faulty. Hopefully you have warranty. Double check all connections .A thumbs up would be greatly appreciated if this answer is helpful to you.

Aug 25, 2009 | Lightning Audio PC2 Capacitor Car Audio...

2 Answers

RCA CABLES


RCA cables are the best way to get the audio from your head unit to the amp. If your head unit doesn't have RCA outputs, you might be able to use the speaker outputs of the head unit to connect to the "high power" or "high level" inputs of the amp, if the amp has such inputs (check your manual).

Mar 23, 2008 | Lightning Audio LA1.300.2 Car Audio...

Not finding what you are looking for?
Jl Audio 1000/1 Car Audio Amplifier Logo

Related Topics:

739 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jl Audio Car Audio & Video Experts

Alan Desotell
Alan Desotell

Level 1 Expert

17 Answers

matthew walsh

Level 1 Expert

69 Answers

Tygh Duval
Tygh Duval

Level 2 Expert

290 Answers

Are you a Jl Audio Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...