Question about Televison & Video

Open Question

BRATZ 14" 309321 TV/DVD COMBO

KEEPS GOING INTO STANDBY THE SWITCHING ON AND OFF

Posted by on

2 Suggested Answers

  • 1 Answer

SOURCE: Unable to switch on DVD function on a Bush 14" combo

Switch on t/v press TV / DVD button on remote to ensure it is in TV mode. Select DVD by pressing

AV button once or by using input select menu

Press TV /DVD button until DVD RC appears on top left (The remote is now set to DVD mode)

Insert disc ensuring label is to rear of set and Auto play function will start

Posted on Oct 14, 2008

  • 1 Answer

SOURCE: TV/DVD unit locked in Standby mode

If you still have the TV:

Common cure for "stuck in standby"

1. Unplug from mains
2. Press main power switch on/off about 20 times
3. wait about 5 minutes
4. plug it back in and try turning it on as normal (i.e into stand-by then CH+ etc)

It has worked for me on about 8/10 TV sets found stuck this way

Posted on Apr 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Bratz combi tv


This TV cannot be controlled without a remote control. Try to find out the setup codes to this TV brand with universal remote controls, and buy that remote control, and setup it with this TV. There is no other way. If you wish to get more details, check the sites linked below. It has code list and setup proceedings to many popular brand remote controls. Pull up older posts there.
http://electronicshelponline.blogspot.com/
http://electrohelponline.blogspot.com/

May 04, 2013 | Televison & Video

1 Answer

I have an Audiovox FPE1078 and when I load a DVD into it it says No DVD on the screen and doesn't play...what's wrong?


You play some music cd, then let the dvd cool down, you do it enough times the condensation will be gone and DVD can then be played. You use remote to keep it on standby, then condensation problem will be gone forever. I have the same model and fixed it this way.

Dec 10, 2010 | Audiovox FPE1078 7.8 in. TV/DVD Combo

1 Answer

TV comes on, but shuts off after 3 minutes. I must wait at least 5 minutes to get it to turn back on again. TV will ONLY stay on if DVD drawer is OPEN!


dvd is overheating its circuit. Keep the tray open to dry up condensation. then leave TV on standby to keep moisture out.

Dec 07, 2010 | Toshiba MD13N3 13 in. TV/DVD Combo

4 Answers

TV/DVD unit locked in Standby mode


Did you check the casing for a reset button (sometime it an itty ***** hole)
Hope this helps
Trap

Jan 25, 2009 | Bush DVD142RC 14 in. TV/DVD Combo

1 Answer

Unable to switch on DVD function on a Bush 14" combo


Switch on t/v press TV / DVD button on remote to ensure it is in TV mode. Select DVD by pressing

AV button once or by using input select menu

Press TV /DVD button until DVD RC appears on top left (The remote is now set to DVD mode)

Insert disc ensuring label is to rear of set and Auto play function will start

Oct 10, 2008 | Bush DVD142RC 14 in. TV/DVD Combo

1 Answer

Power light on but nobody's home?


The power supplies in most all the smaller combo units are prone to failure. They feed both the TV and the VCR and are underdesigned as they try to keep the cost of a combo affordable.
I've never had much success solving them - sorry
They always break that last time!

Jan 08, 2008 | Recoton Advent Advent DV1418A 14 in....

1 Answer

TV in standby mode


Hi iducher the tv power supply is faulty have a tech repair your tv.good luck

Apr 26, 2007 | Supersonic SC-999TDVD 13 in. TV/DVD Combo

1 Answer

TV DVD VHS combo 27 inch


this problems its no posibil to rezolv home becous is nesesari technology of laborator

Apr 14, 2007 | Emerson SB350 13 in. TV/DVD Combo

1 Answer

Toshiba MW24FM3 24 in. TV/VCR/DVD Combo


A common problem with this model are leaky transistors in the relay drive circuit that powers on the TV. That is electrical leakage, not anything physical you can see. The transistors should be labeled Q1701 and Q1702, and would have to be replaced by soldering, so a trip to a repair shop may be necessary. The DVD uses a standby power supply I believe, which is why it appears to work OK.

Feb 11, 2007 | Toshiba MW24FM3 24 in. TV/VCR/DVD Combo

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

69736 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6370 Answers

yadayada
yadayada

Level 3 Expert

63661 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...