Question about E-Machines eMachines Monitor E15T4

1 Answer

Need to restart my comp to factory settings

Have the computer the same way as i got it first

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 34 Answers

Run the recovery disk or recovery partition to have it back to factory setting.

Posted on Dec 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Samsung 943NW Monitor-----the led is blinking and the screen is flashing and stays black, no picture or desktop appears and monitor menu doesn't work when power on comp after being off for few hours or...


It can be due to dying power supply due to bad caps, that will be the first place to look.
If you are going to DIY and have proper tools and know safety precaution then please read on:
Most common failures in the LCD monitors are bad capacitors (bulging top/seal or leaking) in the power supply (they should be replaced in a set), blown fuses; poor solder joints, failed inverter circuits (blown fuse, shorted transistors, shorted/open transformers), bad lamps (poor solder connections or worn out lamps). You will need to open it up and inspect the inside, see example of failed monitors to get some ideas what to look for: http://s807.photobucket.com/albums/yy352/budm/
Post back what you see inside so we can guide you further and it will help out other people in the future also.

Basic LCD monitor troubleshooting guide:
http://www.fixya.com/support/r6150077-basic_lcd_monitors_troubleshooting
http://www.fixya.com/support/r5093881-lcd_flat_panel_tv_troubleshooting_guide

Learn about bad caps: http://en.wikipedia.org/wiki/Capacitor_plague

Capacitors kit: http://lcdalternatives.auctivacommerce.com/ he can make you a set of caps for you.

Dec 06, 2010 | Samsung 943NW Monitor

2 Answers

My monitor goes dark after 1 second and won't come back until cycled off and on again


Hello,

It is the picture picture board on your monitor that is malfunctioning, since the power led or button is on, but the display screen goes blank after a second, it means the picture board of your monitor has developed fault.

The best thing for you to do now is to take the monitor to a local repairer within your vicinity or any service center to help with the replacement of the picture board because the fault is not something you can fix yourself, in order not to complicate issues.

Take care.

May 07, 2010 | ViewSonic VG710b 17" Flat Panel LCD...

1 Answer

The led is blinking and the screen is flashing and stays black, no picture or desktop appears and monitor menu doesn't work when power on comp after being off for few hours or longer, Tried with changing...


Make sure that your computer isn't going into Standby or Hibernate mode. You can test this by briefly pressing the power button and wait to see if the screen comes back on.

Oct 26, 2009 | Samsung 943NW Monitor

1 Answer

I have a Starlogic LCD monitor


you have definitely chosen a higher resolution than what your model of monitor could support , if you have a spare monitor please conenct change to regular 1024/768 resolution save it restart system and plug back this monitor and it should work , also you can try starting you comp on safemode and set the above specified resolution and try , do let me know what happens.
rgds
dil

Jul 30, 2009 | Computer Monitors

2 Answers

Can't set to optimal resolution


Hi, according to this link: http://support.dell.com/support/edocs/monitors/S2409W/en/ug/internet.htm You have to enter your "service tag" number or contact dell about obtaining a "graphics adapter". I hope this information helps you, best of luck. Please let us know if this information helped and accept this answer. If you need more clarification please feel free to ask... Kiyoske_dante

May 24, 2009 | Dell S2409W LCD Monitor

1 Answer

Computer Icons not working after computer starts up applications


We are probably looking at a virus attack which has already infected the system, once infected the antivirus at times fail to detect.

please do a clean repair of the operating system, you won't loose files just some settings.

Thanks,

Mar 25, 2009 | Computer Monitors

1 Answer

Screen prob.


For flat panel systems there are 2 inputs. DVI using the white cable and VGA. by default flat panels are set to DVI input. hit the menu button on the screen and there should be an option there to change the input video. if this will not work it could be a problem on the video port on your acer computer or it could you might need a new VGA cable.

Oct 11, 2007 | Dell E172FP 17" LCD Flat Panel Monitor

1 Answer

Screen problem


Go step by step: 1. maybe you are trying to set a higher resolution then the screen can be 2. its possible that your comp don?t recognize the screen right, check the "display properties" make sure it?s the right model 3. reinstall the drivers. Restart. 4. if its not the software it?s the hardware, try connecting the screen to another computer if it works fine the problem is in the display board . Good luck

Feb 23, 2006 | LG Flatron 995FT 19" CRT Monitor

Not finding what you are looking for?
E-Machines eMachines Monitor E15T4 Logo

Related Topics:

71 people viewed this question

Ask a Question

Usually answered in minutes!

Top E-Machines Computer Monitors Experts

buzz flewhart
buzz flewhart

Level 3 Expert

655 Answers

Ricky Ostrom
Ricky Ostrom

Level 2 Expert

270 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you an E-Machines Computer Monitor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...