Question about Konica Minolta magicolor 2300DL Laser Printer

1 Answer

Toner problems I have a konica minolta 2300dl printer i replaced the toner cartridge and still get error light and message that toner needs to be replaced on printer screen the colors cycle through the screen black yellow magenta but the cyan does not show on screen could that be the problem all the toner cartridges are full.

Posted by on

  • Anonymous Mar 14, 2014

    I replaced the magenta and cyan colors in my printer but now the printer is telling me that i need to replace them again, even though it says that the colors full WHAT SHOULD I DO?

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Governor:

    An expert whose answer got voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 186 Answers

A couple of suggestions. 1. make sure there is not any plastic shipping tabs that need to be removed from the cartridge. 2. try reseating the cartridge. 3. Try replacing that cyan cartridge. It may be defective. Also make sure you use Minolta brand toners!

Posted on Jun 29, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the ink cartridge?


Hello.

This printer is a laser jet printer - so you will be changing the multiple toner cartridges, not ink cartridges.

Page 56 starts the steps on how to replace the toner cartridges.

ftp://ftp.minolta-qms.com/pub/cts/out_going/manuals/2300dl/eg_user.pdf

The front of the printer opens to the right and exposes the toner cartridges for removal.

May 04, 2010 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Our 2300DL is leaving streaks when printing


Out of one or more toners. If you have removed and replaced a cartridge in error the % remaining is reset to 100%. Try to determine which color is missing in your print out (usually black), and then follow menu instructions to replace that cartridge. The ends are color coded so be sure you change the correct one. This will insure the remaining cartridges % remaining is correct.

Jan 13, 2010 | Konica Minolta magicolor 2300DL Laser...

2 Answers

I have followed the instructions exactly for replacing the black toner cartridge on my Magicolor 2300 DL, but i still have the error message "Replace Toner Black." I tried taking out the cartridge and...


If you have changed the toner cartridge, the printer must complete a calibration cycle (up to 150 seconds). If you open the door before the Ready indicator on the control panel lights up and the Error indicator turns off, the printer stops and repeats the calibration cycle.

1. Open the Status Display (double-click on Status Display icon in the system tray on the lower right-hand portion of the task bar, OR click Start/Programs/KONICA MINOLTA magicolor 2300W Utilities/KONICA MINOLTA magicolor 2300W Status), and then check which toner color is empty.
2. From the Print menu choose Toner Replace...
3. In the Color list box, select the color of the toner cartridge to be replaced (CYAN, MAGENTA, YELLOW, or BLACK).
4. Select the capacity of the new toner cartridge (1500 or 4500).
5. Click OK.
6. When the toner indicator on the control panel starts flashing, open the printer's front door. The carousel is automatically repositioned so that the appropriate toner cartridge can be removed.
2300-0.gif 7. Insert your thumb and index finger into the two holes in the front of the toner cartridge, and then pull the cartridge straight out about 6" (15 cm).
2300-1.gif8. Support the middle of the cartridge with your left hand, and then pull out the cartridge.
2300-2.gif9. Remove the new toner cartridge from its shipping carton.
10. Remove the protective cover clearly marked 'Remove'.
Each toner cartridge has a colored end that corresponds to a color inside the cartridge slots. Always install the toner cartridge in the slot of the same color.
Each toner cartridge has a colored end that corresponds to a color inside the cartridge slots. Always install the toner cartridge in the slot of the same color.
2300-4.gif11. Support the middle of the cartridge with your left hand, insert the thumb and index finger of your right hand into the two holes in the front of the toner cartridge, and then insert the cartridge so that the guides on the cartridge fit into the rails in the cartridge compartment in the carousel.
2300-5.gif12. Gently push the new toner cartridge into the printer.
13. Close the printer's front door.
The printer must complete a calibration cycle (up to 150 seconds) after any consumable has been replaced. If you open the door before the Ready indicator on the control panel lights up and the Error indicator turns off, the printer stops and repeats the calibration cycle.

Sep 01, 2009 | Konica Minolta magicolor 2300DL Laser...

2 Answers

Keep Getting Error Message "(Colour) Toner Not Installed"


I think in the menu you have to select replace cartride.. then new or same with new toner...

each toner cartridge has connections and you must make sure all are tight... or you get alot of errors.

Sep 10, 2008 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Fatal error 17H


Try going through each toner cartridge again. The error is linked to incorrect rotation usually caused by badly seated toner cartridges.
Chris

Dec 06, 2007 | Konica Minolta magicolor 2300DL Laser...

1 Answer

Cartridge Removal 2300DL QMS Minolta


magicolor 2300 DL procedures
a)From the display, select the menu “Engine”.
b)Select “Replace Toner”.
c) Select each color toner cartridge from this
menu to remove it.

Nov 26, 2007 | Konica Minolta magicolor 2300DL Laser...

2 Answers

Konica minolta error


I had the same problem and found that one of the toner cartridges must have not been seated properly. I removed the black toner cartridge and re-fitted it. The printer now works fine again with no errors. 17H is a code relating to a fault in the rotation ......... possibly one or more toner cartridges need checking. Use the menu on the printer to turn it to the appropriate position (i.e. engine menu then select replacement of whichever toner you are checking).
Hope this fixes your as well.
Chris

Aug 27, 2007 | Konica Minolta magicolor 2300DL Laser...

Not finding what you are looking for?
Konica Minolta magicolor 2300DL Laser Printer Logo

358 people viewed this question

Ask a Question

Usually answered in minutes!

Top Konica Minolta Office Equipment & Supplies Experts

Norman  J Weimar Jr
Norman J Weimar Jr

Level 3 Expert

6696 Answers

Adorjani Laszlo

Level 3 Expert

1297 Answers

carpediemweb

Level 1 Expert

47 Answers

Are you a Konica Minolta Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...