Question about Printers & Copiers

1 Answer

I have been using sharp copier- table size(SF-2218). but recently a red image in form of a man is viewed which is stopping the copier from warming up.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Printers & C... Master
  • 990 Answers

Dear sir; The symble of red man, means need PM service, you need to replace DEVELOPER,
slide out developer unit and remove toner hopper(2 screw),Empty old developer,replace with full bag, reassemble, install back to the machine. power on, press "clear", "pause", "0", "pause" keys, then enter 25, press print, enter 2, press print,machine will run for 3 minutes, the "pause" key also call "interupty" key, when machine stop then press "clear" then enter 20 press "print" enter 01, press print, enter 0, then press clear key enter21 press print enter01 press print,enter 0, press print press clear twice to end the simulation.
If you not clear or need more help just email me, I always around, good luck!
DON'T FORGET GIVE ME A RATING
HAVE A HAPPY HOLIDAY !!!

Posted on Dec 22, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Sharp sf 1118 shows error code of red image inform of a person beside or close to the green digital counter . Please I need.a solution thank you.


it means that the machine need service/ to change the P.M kit on the machine and clear the error code by entering the simulation on the machnie

Oct 14, 2015 | Sharp Printers & Copiers

1 Answer

I have a Sharp SF-2020 pedestal copier. The red triangle dots appeared above the yellow digital copy #. Prior to this, it took over a minute for the copier to "boot up". I added factory toner...


Hi r_finch424,

The blink red triangle means that the toner is completely over and can't be refilled. The toner cartridge comes with on-chip sensor that counts the toner life. To resolve this issue, you need to replace a new toner cartridge.

Hope it helps.

Thank you for using FixYa.

Aug 29, 2011 | Sharp SF 2020 Copier

2 Answers

Please .. my Photocopier sudunly stop and find


My Sharp is a different model but my reset is:
Hit:
Clear (then)
Auto (then)
Clear (then)
Auto (then)
14 THEN
Start
It resets itself.

Oct 06, 2009 | Sharp AR-207 Copier

1 Answer

Sharp SF 2030 check sorter problem


follow the small holes on the sorter trays to the bottom and top there you will find the sensors that tell the copier that ther is paper in the trays make sure that they are clean and ther is no obstruction

Mar 24, 2009 | Sharp SF 2020 Copier

1 Answer

Sharp SF-2014 Copier Jams


1-check and make sure the paper sizes coreresponds : If using Letter it must indicate 8 1/2x 11 or (Letter) not Legal or 8 1/2 x 14.

2- the tires are slipping and trowing the timing off. change tires (cheap)

Aug 20, 2008 | Sharp Printers & Copiers

2 Answers

Sf-1118


does the same occur when the manual paper feed path is used?

Apr 08, 2007 | Sharp AL 1215 Black and White Copier

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96467 Answers

old marine
old marine

Level 3 Expert

1463 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...