Question about Toshiba Televison & Video
We have a Toshiba TV/DVD player combo. Have only used DVD player twice, first time fine, second time would not recognize disk, will not recongize any DVD now
Please check these things:
1. Are you placing the disk with correct side on the tray.
2. Is your DVd player has a region lock for the DVDs you are playing.
If above question are not true then you must go to the reapir man.
Please rate me appropriately if you are satisfied with my answer,in case, if you want any clarification please get back to me.
Posted on Dec 22, 2008
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Tips for a great answer:
Aug 31, 2015 | Toshiba MD13N3 13 in. TV/DVD Combo
Oct 21, 2011 | One For All URC-3021 Remote Control
Jul 26, 2011 | Toshiba 37LX96 37 in. LCD TV/DVD Combo
 Turn on a desired device (e.g.,VCR or DVD player) and, if
applicable, insertmedia (e.g., cassette or disc).
NOTE: Please read steps 2 through 4 completely before proceeding.
Highlight or write down the codes and device you wish to program
before starting step 2.
 On the remote control,press a device key once (i.e., VCR/PVR,
NOTE: To program control of a VCR, PVR (or DVR),TV/VCR Combo,
or TV/VCR/DVD Player Combo press VCR/PVR once.After programming
a VCR Combo device, you will be able to control channel selection,
NOTE: To program control of a DVD Player,DVD Player/VCR
Combo, or TV/DVD Player Combo, press DVD once.After programming
a DVD Combo device, you will be able to control channel selection,
volume, and DVD functions.
NOTE: To program control of a Cable Box, Cable Box/PVR (or DVR)
Combo, Satellite Receiver, or a Satellite Receiver/PVR (or DVR)
Combo, press CBL/SAT once.
 Press and hold SET until the LED (red light) blinks twice,
then release SET.
Use the Manufacturer's Codes to
locate the type of device and brand name and then enter
the first four-digit code for your device. If performed correctly,
the LED will blink twice.
NOTE: If the LED did not blink twice, repeat steps 2 through 4 and enter
the same code again
 Aimthe remote control at the device and press POWER
once.The device should turn off. If it does not, repeat
steps 2 through 5, trying each code for your brand until
you find one that works. If it still doesn't work, try
Searching For Your Code on next page.
NOTE: If the device does not have a POWER key, press PLAY
Jul 03, 2011 | One For All URC4220 Remote Control
Nov 10, 2009 | Toshiba MW24FP1 24 in. TV/VCR/DVD Combo
Nov 23, 2008 | Toshiba MD13N3 13 in. TV/DVD Combo
Mar 04, 2008 | Toshiba MW24FP1 24 in. TV/VCR/DVD Combo
Jul 11, 2018 | Toshiba Televison & Video
163 people viewed this question
Usually answered in minutes!