Question about Motorola Mobility RAZR V3

1 Answer

No sound on receiver or keypad after using Bluetooth in car

I've noticed that after connecting the phone to the in-car Bluetooth device, the phone will soon after lose all sound including from the receiver (can't hear anything when calling), the ring-tone (can't hear calls when being received) and the keypad.
Anyone know what may cause this and what to do about it?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Brigadier General:

    An expert that has over 10,000 points.

  • Master
  • 7,752 Answers

You should take it to a mobile shop and have them reinstalled the device for you.

Posted on Dec 26, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to pair my sprint slx-800 to my android phone


You should search for this topic and answers, First.

Try 0000 that's the default for all bluetooth accessories.

If that doesn't work, here is generic instructions:


Paring a Bluetooth Handset with Android phone:

Instructions:
Now that you have your headset in pairing mode, proceed to pair it with your phone:

From the home screen, press the Menu key and then select Settings.

Tap the "Bluetooth" toggle to ON.

Tap Bluetooth to scan for devices.
NOTE: You will automatically be connected to an available saved device when Bluetooth is turned on.

Tap one to connect.
NOTE: A security code may be required. (Try 0000)

The Bluetooth connected icon will be displayed in the notification bar, and the device will now be labeled as Connected.

Place calls using the Bluetooth headset

Ensure the Bluetooth headset is paired with the handset.
Place the Bluetooth headset over your ear.
Dial the desired the phone number on your phone, and then tap Call.
Receive calls using the Bluetooth headset

Ensure the Bluetooth headset is paired with the handset.
Place the Bluetooth headset over your ear.
Press the Call button on the Bluetooth headset when a call is received.

Aug 20, 2015 | Sprint Cell Phones

Tip

How to connect Bluetooth GPS using mobile phone


<p>Once I explain how Bluetooth GPS receiver to connect from a mobile phone. Bluetooth GPS Receiver is a device that continuously transmits its position (longitude, latitude and speed) using the Bluetooth protocol. If your phone is Bluetooth-enabled phone, you can connect to a Bluetooth GPS receiver to determine its position. To locate, connect to Bluetooth GPS and mobile phone to get the NMEA sentences for location tracking, you can also program a Java (J2ME) for your phone. Your program should do the following tasks: <br /> <p><br /> <p>1. Bluetooth device within the search area. Each time a Bluetooth device is discovered, discovery listener device Discovered trigger procedure. In the search is completed, the trigger listener discovery process inquiry Completed. <br /> <p><br /> <p>2. Get the name Bluetooth. We have a choice to a group list of Bluetooth-friendly name of the devices found to store. We also need a vector to devices found to store. <br /> <p><br /> <p>3. Select Bluetooth GPS receiver from the list of found devices. <br /> <p>4. Find service by the GPS device. Bluetooth GPS Receiver provides an L2CAP service so that the program needs to find this service for GPS url connection string for. <br /> <p><br /> <p>5. Get connection string from the GPS device. Connection string to the URL will have this format Url = "btspp: Address / bluetooth /:" + + L2CAP_UUID "permission = false; encrypt = false"; <br /> <p><br /> <p>6. Sign up and receive sentences from the GPS device. After plugging in the url in step 5, you can open the connection and extract sentences from the connection string. <br />

on Jun 26, 2011 | Cell Phones

Tip

Jabra Bluetooth Headset Pairing Instructions


<span><span>Connecting a Bluetooth headset or car kit</span> <span> You can listen to music over a Bluetooth stereo headset, or have hands-free conversations using a compatible Bluetooth headset or car kit. It's the same procedure to set up stereo audio and hands-free. <ul> <li>For you to listen to music with your headset or car kit, the headset or car kit must support the A2DP Bluetooth profile. </li> <li>Before you connect your headset, you need to make it discoverable so your phone can find it. You can find out how to do this by referring to your headset manual. </li></ul> <ol> <li> <span>From the Home screen, press <span>MENU</span>, and then tap <span><span>Settings</span> &gt; <span>Wireless & networks</span></span>. </span> </li> <li> <span>Tap <span>Bluetooth settings</span>. </span> </li> <li> <span>If the <span>Bluetooth</span> check box is not selected, select it to turn Bluetooth on. </span> </li> <li> <span>Make sure that the headset is discoverable. </span> </li> <li> <span>Tap <span>Scan for devices</span>. </span> Your phone will start to scan for Bluetooth devices within range. </li> <li> <span>When you see the name of your headset displayed in the <span>Bluetooth devices </span>section, tap the name. </span> Your phone then automatically tries to pair with the headset. </li> <li> <span>If automatic pairing fails, enter the passcode supplied with your headset. </span> </li></ol> The pairing and connection status is displayed below the hands-free headset or car kit name in the <span>Bluetooth devices</span> section. When the Bluetooth headset or car kit is connected to your phone, the Bluetooth connected icon is displayed in the status bar. Depending on the type of headset or car kit you have connected, you can then start using the headset or car kit to listen to music and/or make and receive phone calls. </span></span>

on May 23, 2011 | Cell Phones

1 Answer

How do you pair a jawbone to a samsung t259 phone?


To set up Bluetooth on your phone

1. Go to Menu, select Connect or Connections or Connectivity:

Note! If the above steps do not work, please consult the user manual.

2. Bluetooth - Select On to enable Bluetooth.

3. My telephone's visibility - Select Shown to all if you want your device to be found by other Bluetooth devices. If you select Hidden, your device cannot be found by other devices.

4. My Bluetooth name - Define a name for your device. After you have activated your Bluetooth service and changed My phone's visibility to Shown to all, your phone and this name can be seen by other Bluetooth device users.

Sending data via Bluetooth

If your phone supports the Bluetooth 1.1 specification or earlier, you can only have one Bluetooth connection running on your phone at any one time.

1. Select or open the file you wish to send. For example, to send a photo to another device, open the Gallery application.

2. Select the file you wish to send, then select Options > Send > via Bluetooth.

3. The phone starts to search for devices within range.

Devices using Bluetooth technology that are within range will appear on the display. You should see a device icon, the device's name, the device type, or a short name. (A paired device is one where a Bluetooth connection already exists between your phone and the other device.)

• To interrupt the search, press Stop. The device list freezes and you can start to form a connection to one of the devices already found.

If you have searched for devices earlier, a list of the devices that were found previously is shown first. To start a new search, select More devices. If you switch off the phone, the list of devices is cleared and the device search needs to be started again before sending data.

4. Scroll to the device you want to connect with and press Select. The item you are sending is copied to Outbox and the note Connecting is shown.

5. Pairing (if this is not required by the other device, proceed to step 6.)

• If the other device requires pairing before data can be transmitted, a tone sounds and you are asked to enter a passcode. • Create your own passcode (1-16 characters long, numeric) and agree with the owner of the other device to use the same code. This passcode is used only once and you do not have to memorise it. • After pairing, the device is saved to the Paired devices view.

6. When the connection has been successfully established, the note Sending data is shown. Data received via Bluetooth can be found in the Inbox folder in Messaging. Tip: Pairing is a means of authentication. The users of the devices using Bluetooth technology should agree together what the passcode is, and use the same passcode for both devices in order to pair them. Devices that do not have a user interface have a preset passcode.

Checking the status of the Bluetooth connection

• When the Bluetooth icon is shown in standby mode, Bluetooth is active.

• When the Bluetooth icon is blinking, your phone is trying to connect to the other device. • When the Bluetooth icon is shown continuously, the Bluetooth connection is active.

Receiving data via Bluetooth

When you receive data via Bluetooth, a message alert tone is played and you are asked if you want to accept the message. If you accept, the item is placed in the Inbox folder in Messaging.

Disconnecting Bluetooth

A Bluetooth connection is disconnected automatically after sending or receiving data.

Jun 15, 2011 | Cell Phones

1 Answer

Cant pair device without passcode


Hi, to set up Bluetooth on your phone

1. Go to Menu, select Connect or Connections or Connectivity:

Note! If the above steps do not work, please consult the user manual.

2. Bluetooth - Select On to enable Bluetooth.

3. My telephone's visibility - Select Shown to all if you want your device to be found by other Bluetooth devices. If you select Hidden, your device cannot be found by other devices.

4. My Bluetooth name - Define a name for your device. After you have activated your Bluetooth service and changed My phone's visibility to Shown to all, your phone and this name can be seen by other Bluetooth device users.

Sending data via Bluetooth

If your phone supports the Bluetooth 1.1 specification or earlier, you can only have one Bluetooth connection running on your phone at any one time.

1. Select or open the file you wish to send. For example, to send a photo to another device, open the Gallery application.

2. Select the file you wish to send, then select Options > Send > via Bluetooth.

3. The phone starts to search for devices within range.

Devices using Bluetooth technology that are within range will appear on the display. You should see a device icon, the device's name, the device type, or a short name. (A paired device is one where a Bluetooth connection already exists between your phone and the other device.)

• To interrupt the search, press Stop. The device list freezes and you can start to form a connection to one of the devices already found.

If you have searched for devices earlier, a list of the devices that were found previously is shown first. To start a new search, select More devices. If you switch off the phone, the list of devices is cleared and the device search needs to be started again before sending data.

4. Scroll to the device you want to connect with and press Select. The item you are sending is copied to Outbox and the note Connecting is shown.

5. Pairing (if this is not required by the other device, proceed to step 6.)

• If the other device requires pairing before data can be transmitted, a tone sounds and you are asked to enter a passcode. • Create your own passcode (1-16 characters long, numeric) and agree with the owner of the other device to use the same code. This passcode is used only once and you do not have to memorise it. • After pairing, the device is saved to the Paired devices view.

6. When the connection has been successfully established, the note Sending data is shown. Data received via Bluetooth can be found in the Inbox folder in Messaging. Tip: Pairing is a means of authentication. The users of the devices using Bluetooth technology should agree together what the passcode is, and use the same passcode for both devices in order to pair them. Devices that do not have a user interface have a preset passcode.

Checking the status of the Bluetooth connection

• When the Bluetooth icon is shown in standby mode, Bluetooth is active.

• When the Bluetooth icon is blinking, your phone is trying to connect to the other device. • When the Bluetooth icon is shown continuously, the Bluetooth connection is active.

Receiving data via Bluetooth

When you receive data via Bluetooth, a message alert tone is played and you are asked if you want to accept the message. If you accept, the item is placed in the Inbox folder in Messaging.

Disconnecting Bluetooth

A Bluetooth connection is disconnected automatically after sending or receiving data.

The phone will search for a couple seconds. If your headset is in paring mode, it will show up on the phone either with the name of device or something like this [unknown headset] or [b2.c3.f4.56.a1] (called a MAC address).

Either way, select it, and hit OK.


The phone will now ask you for a "Pin" or "Passcode", which is a 4 digit number. Headsets will ALWAYS have 0000 (four zeros) as a pin or passcode. I have never encountered a headset with a different number as a passcode. I have been in wireless for 10 years, and still have not found a headset that has any different numbers.

Enter these four zeros and select "OK"

Hope that helped...


Thanks for using fixya...

Feb 07, 2011 | Cell Phones

1 Answer

My samsung sgh-t139 cannot connect be found on bluetooth


To Turn Bluetooth On or Off

This option allows you to turn Bluetooth On or Off.
1. From Idle mode, press Menu ? Settings ? Bluetooth.
2. Make a selection and press the Select soft key or the OK button on your keypad.

My Devices

This option allows you to search for new Bluetooth devices. Highlight the Search new device option and press the Select soft key or the OK Button on your keypad. The phone searches for available devices.

Sometimes cell phones and bluetooth devices become problematic when trying to pair them together. If you've followed the directions correctly but are still not able to get them to pair, take them to your cellular company's store and let them pair the devices. They can show you step - by - step how to correctly do it.

Jan 26, 2011 | Samsung Cell Phones

1 Answer

How to on or off bluetooth on w508i. even how to change setting of bluetooth


Hi, To set up Bluetooth on your phone

1. Go to Menu, select Connect or Connections or Connectivity:

Note! If the above steps do not work, please consult the user manual.

2. Bluetooth - Select On to enable Bluetooth.

3. My telephone's visibility - Select Shown to all if you want your device to be found by other Bluetooth devices. If you

select Hidden, your device cannot be found by other devices.

4. My Bluetooth name - Define a name for your device. After you have activated your Bluetooth service and changed

My phone's visibility to Shown to all, your phone and this name can be seen by other Bluetooth device users.

Sending data via Bluetooth

If your phone supports the Bluetooth 1.1 specification or earlier, you can only have one Bluetooth connection running

on your phone at any one time.

1. Select or open the file you wish to send. For example, to send a photo to another device, open the Gallery

application.

2. Select the file you wish to send, then select Options > Send > via Bluetooth.

3. The phone starts to search for devices within range.

Devices using Bluetooth technology that are within range will appear on the display. You should see a device icon,

the device's name, the device type, or a short name. (A paired device is one where a Bluetooth connection already

exists between your phone and the other device.)

• To interrupt the search, press Stop. The device list freezes and you can start to form a connection to one of the

devices already found.

If you have searched for devices earlier, a list of the devices that were found previously is shown first. To start a new

search, select More devices. If you switch off the phone, the list of devices is cleared and the device search needs to

be started again before sending data.

4. Scroll to the device you want to connect with and press Select. The item you are sending is copied to Outbox and

the note Connecting is shown.

5. Pairing (if this is not required by the other device, proceed to step 6.)

• If the other device requires pairing before data can be transmitted, a tone sounds and you are asked to enter a

passcode. • Create your own passcode (1-16 characters long, numeric) and agree with the owner of the other device

to use the same code. This passcode is used only once and you do not have to memorise it. • After pairing, the

device is saved to the Paired devices view.

6. When the connection has been successfully established, the note Sending data is shown. Data received via

Bluetooth can be found in the Inbox folder in Messaging. Tip: Pairing is a means of authentication. The users of the

devices using Bluetooth technology should agree together what the passcode is, and use the same passcode for

both devices in order to pair them. Devices that do not have a user interface have a preset passcode.

Checking the status of the Bluetooth connection

• When the Bluetooth icon is shown in standby mode, Bluetooth is active.

• When the Bluetooth icon is blinking, your phone is trying to connect to the other device. • When the Bluetooth icon is

shown continuously, the Bluetooth connection is active.

Receiving data via Bluetooth

When you receive data via Bluetooth, a message alert tone is played and you are asked if you want to accept the

message. If you accept, the item is placed in the Inbox folder in Messaging.

Disconnecting Bluetooth

A Bluetooth connection is disconnected automatically after sending or receiving data.

Hope it helps .

Fill free to pass your comment.

Thanks for using fixya...

Jan 08, 2011 | Sony Ericsson W508i Cell Phone

1 Answer

My eternity will not playback any music or ringtones i have even the keypad sound is not working!


If you had a bluetooth device connected and it did not disconnect properly then the phone may be trying to play the sounds to the bluetooth and not the speaker, Turn the phone's bluetooth off and then on and it should work. Also, if you look at a sound file or video file it will show the bluetooth symbol next to it, which means that it is playing to bluetooth and not the phones outher outputs.

May 10, 2010 | Samsung Eternity Cell Phone

1 Answer

My keypad on my Katana stopped working. Can only


Friend, Check the flex connection from the keypad interface then clean the board or the doom with pencil eraser

Jul 25, 2009 | Sanyo Katana SCP-6600 Cellular Phone

2 Answers

Please Answer


Bluetooth, when activated on your mobile device, you get to chose to be noticed or not. If you chose NOT, then anyone with bluetooth seeking to connect with another device with bluetooth, you're device WILL NOT come up. It'll only show up when you chose YES to notice. When someone is seeking via bluetooth for another bluetooth device to connect with, they'll find your's. You'll have a personalized name or a generic name. Typically, the generic name will be the model of phone you are using. Plus, bluetooth can only connect to one thing at a time. Can't do multiple pairings. In some countries, young adults leave their bluetooths open and noticed for all to find as a dating network.
Hope that answered your question!!

Cheers!

Feb 04, 2009 | LG Prada KE850 Cellular Phone

Not finding what you are looking for?
Motorola Mobility RAZR V3 Logo

58 people viewed this question

Ask a Question

Usually answered in minutes!

Top Motorola Mobility Cell Phones Experts

D. E. Hev

Level 3 Expert

1059 Answers

Lawrence Oravetz

Level 3 Expert

7565 Answers

Are you a Motorola Mobility Cell Phone Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...