Question about EKG/ECG Machines

1 Answer

The screen is not coming on when i push the start button, but

Power is there on indication.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 74 Answers

Here is a link that might be helpful...be sure to check your screen brightness first...I hope this helps


http://www.davismedical.com/resources/Troubleshooting/BASIC-T-SHOOT.pdf

Posted on Jan 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

I purchased a refurbished GE MAC 1200 EKG machine with a new battery. The first time we used it, it worked perfectly. The second time we used it however, only the standby light comes on. The screen remains...


There's several things that could be wrong. What I would do would be to try to run it off the battery, and if it works, then there is a problem either with your power cord, the power cord connection, or the power module inside the machine itself. Try completely turning off the system. Unplug it, figure out a way to let the battery be disconnected, turned off, or just simply let it die. Then re-boot the device and see if there's a change in operability. If there is, or isn't, you should consult the owners manual, and see what you can find on the issues your having. If all else fails, have a technician stop by and work on it.

Nov 25, 2014 | EKG/ECG Machines

1 Answer

My mac 8 ekg screen will not come on


That is a common problem and you need a component level repair of display board. This repair is not so expensive. Just send me email at medex@usa.com

Jun 27, 2012 | EKG/ECG Machines

1 Answer

We keep getting error codes when using our machne


hi,
u didn't mensionend the error code number any where. error code number is must for find out the problem. any way do the following and inform me is it worked or no.

p { margin-bottom: 0.21cm; }

Power the Spot Vital Signs off, wait five seconds, and power on. If the error code

reappears then power the Spot Vital Signs off and disconnect the battery for five minutes.

Reconnect the battery and power on. Press the Blood Pressure Start/Stop button to reset flashing patient alarm conditions.

0k

Dec 29, 2010 | Welch Allyn Spot Vital Signs Monitor with...

1 Answer

"Start" Button turns off vital signs monitor


Even if it is plugged in it will not operate correctly without a good battery. When the pump starts to take a blood pressure it draws a lot of power and this forces it to shut off. You should replace the battery and let it charge 12 hours and you should be in business.
If you have further questions you can contact me at wats@mesasales.com or through our website www.overstockme.com

Jun 12, 2010 | Welch Allyn Spot Vital Signs Monitor with...

1 Answer

Why won't it turn on?


Sounds like you need a new battery. When they go dead you will still see the green light but it will not turn on or only on for a second.

Sep 03, 2009 | Schiller Cardiovit At 2 Light Ecg Machine

1 Answer

Not coming ON


You need a new battery. You can get one form R&D Battries.

Apr 14, 2009 | Schiller Welch Allyn Cardiovit At 2...

1 Answer

Welch Allyn vital sign monitor turns off when we push the start button.


There is not enough current in the battery to start the pump. Even when plugged in these will not work properly if the battery is going bad. These are not technically user replaceable but with a screwdriver and a new battery you can take care of it. I can help more if you like. info@mesasales.com

Feb 20, 2009 | Welch Allyn Atlas Monitor W/Ecg, Nellcor...

1 Answer

Temperature


If you press the power button and the blood pressure button simultaneously, the monitor goes into programming mode. You hit the mode button until you reach the temperature and select the F or C by pressing the blood pressure button. To get out of programming you press the power button to power down and then power back up to use.

Jan 29, 2009 | Welch Allyn Spot Vital Signs Monitor with...

Not finding what you are looking for?
EKG/ECG Machines Logo

Related Topics:

212 people viewed this question

Ask a Question

Usually answered in minutes!

Top EKG/ECG Machines Experts

Electro Med Services...
Electro Med Services...

Level 3 Expert

5653 Answers

Iron
Iron

Level 3 Expert

3018 Answers

yadayada
yadayada

Level 3 Expert

61168 Answers

Are you an EKG/ECG Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...