- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Are you using a volt/ohm meter to determine that the transformer is supplying power to the printer?
If so, what is the input (measured at the receptacle) to the transformer?
What is the output of the transformer and is it supplying the correct amount of voltage (output voltage requirement is normally found imprinted on the body of the transformer or in the technical specifications section of the printer's manual.
Look in the Reference Guide. This should come with your copier if you bought it new. Do you have Finisher J1 (internal finisher, paper comes out above paper trays) or the SaddleFinisher and inner2way tray (paper comes out on left hand side of machine).
For finisher J1 look starting on page 7-38. Saddle Finisher 7-61.
Can get Reference and Copy guides here:
The English versions (which I use, I don't speak Italian) are the ones with ENG in the name.