Question about Intel Motherboard

1 Answer

The acpi bios in this system is not fully compliant with the acpi specification.

Posted by on

  • 1 more comment 
  • Kriss71 Jan 18, 2009

    The BIOS in this system is not fully ACPI compliant. Please contact your system vendor or visit http://www.hardware-update.com for an update BIOS.



    At first, i could not log into windows, and would get an error message: System error: Lsass.exe
    When trying to update a password the return status indicates that the value provided as the current password is not correct.





    Ok..seems like a virus.. I tried everything on the Toshiba M40 pentium m centrino. here's what I tried so far.

    I switched hardrive..same problem.

    I switched 512 mb of Ram.

    I removed the wireless card.

    I updated bios to one from tosiba for this model.

    I switched the CPU with a working one.

    I unplugged everything from the motherboard except for screen keyboard and tried and got the same problem.



    The problem varies. Sometimes it gives me blue screen that ACPI is not supported. Most of the time when windows xp installation reaches 34 minutes the computer reboots itself.

    Once when I changed the processor, the installation went to 22 minutes remaining and then it rebooted and after that it went back to 34 minutes when it would reboot.



    I used boot cd with tools on it, I wiped the cmos..that didnt help.



    Is my motherboard fried? I cant belive it is, there is no beeping.



    also what makes me think is that it is a virus is the reference to http:hardware-update.com in the current acpi error message.



    somone SOS!!!

  • Anonymous Jan 21, 2009

    how do i updating the bios?

  • Kriss71 Feb 25, 2009

    I updated the BIOS. The problem still exists. seems like noone knows?

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 67 Answers

Did you try updating bios

Posted on Dec 22, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

BIOS Acpi Not Compliant


You will need to go to the website for the motherboard manufacturer and download the updated drivers for that motherboard. This is common with all the changes that windows goes through in a life cycle.

Nov 23, 2011 | Computers & Internet

1 Answer

The bios in this system is not fully acpi compliant


It's possible that the BIOS setup has been accidentally set to non ACPI mode. Check in the setup to ensure ACPI is enabled.

Other possible causes that have been pointed out are memory expansion, overclocking and incompatible driver software. Check out what you have recently installed or updated on your computer

or
removed RAM from one slot and boot
or check the bios update
good day and rate solution if it helps

Nov 22, 2010 | Intel D845GVSR Motherboard

1 Answer

NOt on my compeuter


i think this is a p3 system or first generation pentium 4 ... ACPI is an advanced powermangment feature .which helps stand by , hibernate , etc..... and it also power the computer off when clicking shut down in windows ..... a bios update of the corresponding mother baord will do the thing ..
so that u need a fresh floppy disk and a working drive .. do it carefully . as negligence will cause the mobo to be useless

Jun 06, 2009 | Intel Motherboard

1 Answer

ACPI is not a compliant


Enter you bios & disable ACPI. Restart the system. Than update your windows. There should be an update for ACPI through Microsoft update service. Once installed restart your system & enter into your bios. Now enable ACPI. Save & exit the bios.
If this does not help you can try the work around found on Microsoft's web site. See the link provided;
http://support.microsoft.com/kb/314830

Cheers
Mike

Jun 01, 2009 | MSI Computers & Internet

1 Answer

The BIOS in the system is not fully ACPI compliant. I want to updated BIOS. How can I do?


Hi meangmoeurn, what makes you think your bios is not ACPI complaint?
Enter your bios & disable ACPI. The reason for this is windows must be fully updated. One windows has been fully updated you can turn on ACPI. Its a software issue.
Read through this Microsoft link;
http://support.microsoft.com/kb/314088

Update for ACPI, (Windows update);
http://www.microsoft.com/downloads/details.aspx?familyid=B0FF829D-C427-4F40-BC56-F481837EFFBE&displaylang=en
The above update should be included with other updates. This is why I suggested the above.
If you still feel you need to update your bios,
(Flash Utility software). I'll need the motherboard model number & manufacture's name.

Good luck meangmoeurn!
Feel free to correct me on this issue.
Thank you for using fixya.
Mike

Jan 11, 2009 | Computers & Internet

1 Answer

The ACPI BIOS in this system is not flly compliant with the


Hey there,

You havnt specified your problem clearly.

If ur motherboard is not compatible with the hardwre then u dont have to worry about it. Try upgrading ur M/B Bios. with latest version. This BIOS (*.ROM) fie u'll get on ur M/B manufacturer site. Type ur model no in the search pane of that site and provide the Model no of ur mother board.

Read the M/B manual to upgrade your BIOS.

Gime ur acknowledge by rating me.

Thanx
--
Romy

Dec 23, 2008 | Computers & Internet

1 Answer

Manufacturer-spplied hardware support disk


go into bios setup when booting computer at the first screen press the del key or f2 or f10 or check bottom left of screen for how to enter bios.
When in bios check to see what key to press to set it to default.
this may fix it

Jul 28, 2008 | Intel Motherboard

1 Answer

Acpi complaint - reg


I have located some info on this board. it was released as a "Medion" board

there is some BIOS and driver stuff available HERE

http://www.medionusa.com/ and select customer care.. you need the exat model no or the serial no of the PC to continue though.

Also http://www.treiber.de/ may me of assistance as I think they are the real manufacturer but as I cannot read German I cant really be sure. they have the link to Medion on their webpage...

HIH and please post back results

Jun 23, 2008 | Intel Motherboard

2 Answers

Acpi complaint - reg


Fiend your solution direct from intel. Here is your solution........

bb03e0e.jpg

http://www.intel.com/motherboard/prob676ijt65/solution
41

Jan 17, 2008 | Intel Motherboard

Not finding what you are looking for?
Intel Motherboard Logo

Related Topics:

453 people viewed this question

Ask a Question

Usually answered in minutes!

Top Intel Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Tony

Level 3 Expert

2598 Answers

David
David

Level 3 Expert

752 Answers

Are you an Intel Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...