Question about Electric Stanley Tre500 Staple Gun / Sharpshooter

1 Answer

Installing nail brad in a non elecctric stanley nailgun

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 2 Answers

Find the side of the stapler which says "load brad this side"
open the loader with the aforementioned side facing down
as you look down on the inside wall, there are grooves which the heads of the brads will rest on and will slide along.
close the chamber and you're ready to shoot.

Posted on Jan 06, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How do I load the stapler?


No you don't. We answer most things here.

If the stapler is like any of these

http://www.amazon.com/s?ie=UTF8&page=1&rh=i%3Aaps%2Ck%3Abostitch%20staple%20gun

You push the back in slightly to unlatch it and then drop it down a bit and the staple pusher comes out completely.

Jan 28, 2016 | Heavy Duty Stanley Bostich Heavy-duty...

1 Answer

Can i use 3/4 inch brad nails in my stanley tre500 sharpshooter?


Morning Rhonda,

According to Stanley's own website, the TRE500 will only use either 1/2" or 5/8" brads.

Regards
Alex Bostitchtools co uk Bostitch Nailers Staplers Fasteners Coil Nails Staples

Mar 31, 2015 | Electric Stanley Tre500 Staple Gun /...

1 Answer

Problem with the Stanley Tools TRE550 Electric Staple/Brad Nail Gun Cannot get the staple drive flush help me please


First, try holding the stapler very firm to your project and make sure that the piece that you staple in to is backed solid with no give or springiness.
second, you might try shorter staples,or . . try dialing in more tension by turning the big knob on the back end that has the "+" "-"

Sep 11, 2011 | Stanley Tools TRE550 Electric Staple/Brad...

1 Answer

How to load brads into stanley tre 550 electric staple/brad nail gun


HOW TO USE YOUR ELECTRIC STAPLER/NAILER
TO LOAD STAPLES

1. Unplug tool, (fig. 1)...(place on/off switch in "off" position, (fig. 2).)
2. Place on/off switch in "off' position.
3. Select proper staple length.
4. Use only staples identified by stock numbers on next page. Substitute staples may cause jamming.
5. Hold tool upside down. (Squeeze latch and pull, (fig.3).)
6. Drop staples in channel, legs facing upward. Push latch back in to lock in place, (fig. 4).

TO LOAD BRADS

1. Unplug tool, (fig. 1)...(place on/off switch in "off" position, (fig. 2).)
2. Use only brads identified by stock numbers on next page. Substitute brads will cause jamming.
3. Look for the image of a brad nail on the front side of the tool (fig. 5). Load brads into this side only.
4. Hold tool upside down (Squeeze latch and pull, (fig. 3).)
5. Drop brads into the channel, tilt the tool so the brads lay against the channel wall, (fig. 5).
Push the latch back in watching that the brad strip does not fall over.
6. Use High/Low power when driving brads.


TO STAPLE OR NAIL

1. Make sure the on/off switch is in the "off" position, plug stapling tacker in.
2. Turn tool on by switching to position 1 which is the "on" position and hold firmly against work surface to
engage safety mechanism.
3. Apply adequate pressure on the top of the knob (fig. 6.) while the trigger is pulled.

You can find the figures mentioned above at the following link:

http://bdk.force.com/FAQ/servlet/fileField?retURL=%2Fapex%2FPKB_Article%3Fid%3DkA0C0000000CdtPKAS%26brand%3DStanley%26returl%3D%252Fapex%252Fpkb_search%253Fbrand%253DStanley%2526mode%253D0%2526model%253D%2526sortby%253D0%2526terms%253DTRE550&entityId=ka0C0000000CdqqIAC&field=File_1__Body__s

Jun 20, 2011 | Stanley Tools TRE550 Electric Staple/Brad...

1 Answer

How to load brad nails


UNPLUG
look for image of brad nails on tool, load this side only.
Hold upside down.
Pull base back, and swing open......
Be sure they dont fall out, and make sure to use hi power ONLY.

Feb 14, 2011 | Electric Stanley Tre500 Staple Gun /...

1 Answer

How do you load nails into a stanley tre550 nail staple gun?


there should be a button on the bottom rear of the gun, when you press it, it should release a bar that you pull back. the nails go in the dirction you nail them. sometimes the clips are too big for the guns and you have to break about an inch off of them

Dec 06, 2009 | Stanley Tools TRE550 Electric Staple/Brad...

1 Answer

Will only shoot one brad and then stops


its problem is too much oil or not enough. never the less, it needs taken apart and cleaned and inspected. make sure you are shooting the right guage and brand hardware. generic doesnt always work.

May 23, 2009 | Stanley Tools TRE550 Electric Staple/Brad...

1 Answer

Cant find replacement brads for swingline


the problem was not with a stapler it was with an electric brad nail gun made by swingline , after researching this, my swingline (printed right on the gun) turned into a "powerfast electric nailgun model 32003" which will take arrow replacement 1" brads .

May 04, 2009 | Staples Swingline® 36115 Staple Guns Tools...

1 Answer

Installing nail brad in a stapler


I have the same problem and the silly thing is I have used it. Ridiculous that you can't find a manual on it. Well, I have solved it!!!!

our problem is we open the stapler and stare straight down into the cavity. But if you angle it, you can see that there are grooves along the side which the head of the brads would hang and slide along.

1. on one side of the stapler it will say "load brad this side"
2. open the chamber and place the stapler on its side with the aforementioned side down
3 place your strand of brads in the appropriate groove and close the chamber
4 start shooting

pklew52@gmail.com

Dec 22, 2008 | Electric Stanley Tre500 Staple Gun /...

1 Answer

Installing brad nails


Pull the clip in the loader slot. Insert staples point side down. Slide loaded loader clip into place till you hear a click. You are now ready to staple! Enjoy, and make sure to staple the dog somewhere funny.

Oct 18, 2008 | Electric Stanley Tre500 Staple Gun /...

Not finding what you are looking for?
Electric Stanley Tre500  Staple Gun / Sharpshooter Logo

532 people viewed this question

Ask a Question

Usually answered in minutes!

Top Electric Tools & Hardware - Others Experts

Brad Brown

Level 3 Expert

13732 Answers

john h

Level 3 Expert

7409 Answers

Tom Chichester

Level 3 Expert

26110 Answers

Are you an Electric Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...