Question about Trendware TRENDnet TE100-P1U Print Server
When I connect HP deskjet models 3520 or 3650 to the unit's USB port, power up the printer, and then power up the device the USB light blinks very briefly then goes out and stays out. This happens consistently, even after the unit has been powered off for hours before trying again. Is it fried?
A couple of things I would try:
Posted on Jan 28, 2018
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
Unplug it over night. try it again tomorrow. If it still shows all green its fried. It there a reset button anywhere on it? Try holding it down(if there is) while plugging it in. Keep the reset depressed for 30 seconds or so. Otherwise no bueno. Let me know what happens. Good Luck, Tim
Posted on Mar 23, 2007
SOURCE: Trendnet TE100-P1U won't print
open the print server utility and the doc can be cancelled or deleted from there. (this is the server utility inthe toolbar at the bottom of a windows screen. failing this go to the printer shortcut and from control panel>printers> select printer and faxes>select the printer (open) >select "printer" from menu bar, pause printing,then cancel all documents. Afterthis you can delete printers that are excessivly created, or delete all of them and start again with only the one or two printers you need. even if one is for network use and the ther is direct connect. You canuse direct connect to verify proper printer operation until te100 is working properly
Posted on May 10, 2008
OK, are you doing all this as Administrator? This is a must do.
Are you sure that you have the right IP address?
Can you Ping the unit?
Try another browser to do so, try Firefox, or Google Chrome.
Is your Ethernet cable OK?
Is the Driver a Win 7? if not perhaps you need to set compatibility mode for XP SP2? AND Run as Administrator.
Is UAC set to OFF.
If 64 Bit system has Digital Driver Signing been set to OFF, if the driver isn't digitally signed? (Press F8 at boot up and choose from bottom of list)
Also make sure that you have Disabled DHCP server in ALL PC's, go to Services, and see if it is disabled? It needs to be.
Below is the install how to, have a look at it, see if it's the same as yours?
OK, try this hook directly to the PS, from a PC via, use an standard Ethernet cable, use a direct connection, Do NOT go through the router/ switch, now try setting it all up. Now you should see it connect to the unit,
You should be able to access it, if direct connected, if it still doesn't respond, then the only thing it can now be is a faulty unit?
If OK, once configured then you can hook it up as per diagram, and it should then work.
Posted on Sep 22, 2010
Tips for a great answer:
Nov 13, 2013 | Trendnet 1-Port Print Server TE100-P1U...
Apr 17, 2012 | Trendware TRENDnet TE100-P1U Print Server
Jan 12, 2018 | Trendware TRENDnet TE100-P1U Print Server
Jun 24, 2010 | Trendware TRENDnet TE100-P11 Print Server...
Aug 12, 2009 | Trendware TRENDnet TE100-P1U Print Server
Mar 09, 2009 | Trendware TRENDnet TE100-P1U Print Server
Mar 31, 2008 | Trendware TRENDnet TE100-P1U Print Server
Oct 25, 2007 | Trendware TRENDnet TE100-P1U Print Server
327 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: