Question about Magnum DeltaForce CB Radio

1 Answer

RK mic to RCA co-pilot CB

Having trouble getting wires in the right place from the mic to the 4 pin. 5 colors and 1 braid. red, white, blue, black, and yellow.Any Ideas would be greatly appreciated. I can get close but not the whole cigar.Thank You Very Much....

Posted by on

  • Anonymous Apr 23, 2009

    any one know the wire code to rca copilot for turner + 2 mic thanks

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Champion:

    An expert who has answered 200 questions.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 219 Answers

Yellow is a dead wire don'r worry about it

red and sheid braided 1
white 2
blue 3

black 4
numbers by holes

Posted on Nov 21, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need wire colors for CB microphone its a TRC


ALTAI PWR MIC - black/braid= earth, red=RX, white=TX, Yellow=MODASTATIC - blue/braid=earth, black=RX, red=TX, white=MOD, Yellow=Spare
SIRTEL ECHO MIC CBE 2002 - black/braid=earth, blue=TX, white=RX, red=MOD007 POWER MIC - brown/braid=earth, green=RX, white=TX, blue=MODSADELTA EC 980 - braid=earth, green=RX, brn=TX, white=MOD
or braid=earth, black=RX, blue=TX, white=MOD

Oct 30, 2016 | CB Radios

1 Answer

I have a general lee cb with a 4-pin standard mic. the wires in my mic cord broke at the plug. does wnyone know how to wire this type of mic back and what color wires go to the correct pin?there are 6...


Here are the Pin outs for different mics that will work with your radio. If a wire is not listed then you cut it off. It's best to keep the wires as short as possible no longer than a half inch is suggested. Normally the Cobra pin out is standard for most radios.

Stock - 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive)

Astatic - (4 wire) 1- Shield 2- White 3- Red 4- Black

Astatic - (6 wire) 1- Shield & Blue 2- White 3- Red 4- Black Yellow NC

Daiwa EM-500, Cobra, CA Series - 1- Shield & Black 2- Red 3- White 4- Blue

Galaxy DC-521S - (4 wire) 1- Shield 2- Yellow 3- Red 4- Black

Galaxy CB-660EI - 1- Shield & Black 2- White 3- Red 4- Blue

Sadelta - 1- Shield 2- White 3- Brown 4- Green

Turner - 1- Shield & Red 2- White 3- Blue 4- Black Yellow NC

Jul 12, 2011 | Magnum DeltaForce CB Radio

1 Answer

I need the wiring for the mic


Hello,
Here is the wire diagram for several common mics in relation to a 4 pin CB. Most recent 4 pin CB's such as Midland, Cobra, Connex, Uniden, etc can use 4 pin mics. The wiring is actually depending on the mic rather than the CB so long as the CB's are 4 pin as well. Once you go back to late 80's the 4 pin design was a little different. Anything new it is simpler.
Stock Mic 1- Shield (Ground) 2- Yellow (Audio) 3- Red (Transmit) 4- White (Receive)
Astatic - 4 wire 1- Shield 2- White 3- Red 4- Black
static - 6 wire 1- Shield & Blue 2- White 3- Red 4- Black Yellow NC

Daiwa EM-500 Cobra CA Series 1- Shield & Black 2- Red 3- White 4- Blue
Galaxy DC-521S - 4 wire 1- Shield 2- Yellow 3- Red 4- Black
Galaxy CB-660EI 1- Shield & Black 2- White 3- Red 4- Blue
Sadelta 1- Shield 2- White 3- Brown 4- Green
Turner RK56 Road King 1- Shield & Red 2- White 3- Blue 4- Black Yellow NC
Regards, Tony

Apr 07, 2011 | Connex CB Radios

1 Answer

Need to change mic jack . wires came unhooked which wire goes where ?


If it is a 5 pin then..
Looking from inside the radio at the mic jack, with the nub down. Starting from the left is pin 1, pin 2, pin 3, pin 4, and pin 5.

here is the colors that should be attached to each.

1 is white.
2 is sheild.
3 is black.
4 is red.
5 is blue.

Here is a 4 pin explanation:

Again looking from inside the radio, with the nub down. Starting from the left, Pin 1, Pin 2, Pin 3, Pin 4.

Pin 1 is red.
Pin 2 is white.
Pin 3 is blue.
Pin 4 is black.

Apr 20, 2009 | Cobra 148 GTL 120-Channels Base CB Radio

2 Answers

I have a turner plus 3 mic with 4 wires red,black, ground and white. i need to wire it to a 5 pin uniden washington radio, looking for a wiring pattern with pin number to wire color


Here are 2 way's
1- white
2- shield
3- black
4- red
5- blue
yellow is not used.
if this dose not work try moving the red wire to pin 5 and the blue wire
to pin 4

Mar 04, 2009 | Uniden GRANTLT 40-Channels Base CB Radio

1 Answer

RK mic to RCA co-pilot


try red and sheid brided wire on 1

white 2

blue 3

black 4

Dec 22, 2008 | Magnum DeltaForce CB Radio

2 Answers

Road King mic to RCA co-pilot


put the wires in the color macth each wire with the macth the colors with the same colors

Dec 21, 2008 | Magnum DeltaForce CB Radio

5 Answers

Cb mic wiring


I have a browning golden eagle mark II. It has a two pin mic plug. I would like to hook up a astatic power mic to it. Anyone have an answer?

Oct 07, 2008 | Magnum DeltaForce CB Radio

1 Answer

Wiring code for opek power mic please help


Hello mingo, did you get it wired ok or do you still need some guidance??? Let me know,, Mechanic

Jul 11, 2008 | Magnum 257 CB Radio

Not finding what you are looking for?
CB Radios Logo

Related Topics:

177 people viewed this question

Ask a Question

Usually answered in minutes!

Top Magnum CB Radios Experts

AnyMHz.com
AnyMHz.com

Level 2 Expert

489 Answers

Iron
Iron

Level 3 Expert

3018 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3051 Answers

Are you a Magnum CB Radio Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...