Question about Micro Solutions RoadStor Pro (738909003104) DVD±RW Burner

2 Answers

Just bought this RoadStor and can't get it to perform the first basic function which is to burn a CF card to a CD. I tried using an 8 gig card with 5 images. I press the burn button twice and in a few seconds it spits out the card and gives me a "burn failure" message. No difference when using a CD-R or CD-RW disc. I tried a 258 MB card with 2 images and it went up to 04% burned before spitting out both CD-R and CD-RW discs. I get the same results with the battery or A/C Power. I have read MANY reviews of this product and MANY people have had the same problem, but no one can give an answer as to the solution. They just complain. Any suggestions?

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.


    An expert that has over 500 points.


    An expert who has written 50 answers of more than 400 characters.

  • Expert
  • 327 Answers

As if the device is new try contacting the service center as there r many persons siuffering like you and no 1 has solvbed the problem and many r getting the same errors.

Posted on Dec 21, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points


    An expert that got 20 achievements.


    An expert that got 10 achievements.


    An expert that got 5 achievements.

  • Master
  • 6,487 Answers

Yes you;re correct that alot of user have same problem as you and this problem is can be cause by a software glitch inside this portable burner that causes it not to work properly, fuirst thing that you can try is to contact the manufacturer and ask if there's any software update that you can do if none I suggest you replace this unit with adifferent brand...

Posted on Dec 21, 2008

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

LG HL-DT-ST DVD RAM GSA -H55N ATA dvd drive not detecting any dvds, while the cds are detected very well ????

built in 06 or 07 , it has reached the end of it's life expectancy , and need replaced

Oct 23, 2015 | LG CD & DVD Burners

1 Answer

My mac won't recognize my cd burner

Is the cd burner mac compatible? If not you may have to download a recognition program.

Jul 07, 2014 | Micro Solutions RoadStor 401010 CD-RW...

1 Answer

I can't burn 2Gb even though my DVD is 4,7 Gb

The size of the file in MB. does not equal what is burned onto the disk. 4 x 600 = 2400 MB. but what is burned to the disk is usually more than what the file size equals. Try using a dual-layer blank disk and see what happens.

Feb 10, 2014 | JVC CD & DVD Burners

1 Answer

Whenever I try to burn a cd in my DVD ram a message shows up saying it is not accessible, Incorrect function.? What do I do? ive tried to disable and enable the drive then reboot the sys., still the same...

try running the fix-tool provided by Microsoft on this web page

If that fails then my suspicion is that either
1) the drive has failed
or more likely
2) because you don't have any DVD burning software, windows can't understand the blank DVD-RW disk. Thas basic packet-burning software installed with XP CANNOT write to DVD disks.

However there is a bit more to it than that - the Microsoft CD burning software (which is a cut down Roxio product) cannot co-exist with any other packet burning software (e.g. DLA, In-CD or simuilar) so if one of those is installed you have to DISABLE the MS CD burning capability on the drive settings tab. Even worse, Internet Explorer 8 is not compatible with DLA - which is included in quite a few CD/DVD suites including many of the later Roxio versions

My advice would be
1) un-install any CD or DVD burning software on the machine
2) disable the MS CD burning
3) run that Microsoft patch
4) Install some DVD burning software but DON'T install the packet writing software part of it

Note that after installing that patch you may also have to reinstall any DVD playing software

Nov 07, 2010 | CD & DVD Burners

1 Answer

Want to burn a CD from USB of my avant grande performance

The best way is to copy the audio file from the USB drive to the MAC and then burn the audio file onto the CD using the MAC, provided the MAC has a CD Writer and a burning program.

Dec 24, 2009 | Apple CD & DVD Burners

1 Answer

I have never been able to burn a dvd in the last 2-3 years since i bought the acer Please HELP

Hello Bobby_8,

I'm sorry to hear that you haven't been able to burn using your CD & DVD burners.

You will need to get a burning software for you to be able to burn CD's & DVD's to your heart's desire. I use Nero Startsmart Essentials version 8.

You will need to get a licensed copy though.

Hope that helps.

Yours truly,
Art Pena

Nov 20, 2009 | Acer CD & DVD Burners

1 Answer

CD burner not recognizing blank disc

Lol,don't worry i had the same thing,first make sure when you are writing a dvd you have changed the setting on nero to dvd,the progress bar at the bottom will change from 700megs to 4.7gigs... and its also depends wether you are writing 4,7 gigs or 8.4 gigs...try it out.

Jul 23, 2009 | QPS Que! CD-Rewriter CD-RW Burner

3 Answers

Burner not recognized

have you tried another burning application, If it works as a normal dvd/cd drive then I cant see any problems with IDE cable config as stated by Bear001, Does Nero 7 reconise the dvd burner, you could look on neros website to see if this is an issue or maybe use version 6, I have had no probs with this version, let me know how you get on and good luck!

Feb 15, 2008 | CD & DVD Burners

5 Answers

Lite-on DVD R/W combo LH-20A1L BLO5 Blank discs not recognized

Have you checked device manager to see if you have a yellow checkmark on your DVD./CD drives? if ok, sounds to me like the maker of the LH-20A1l BLO5 either needs to fix your problem or replace it. The Nero 7 should enable it to work correctly.

Feb 14, 2008 | CD & DVD Burners

Not finding what you are looking for?
Micro Solutions RoadStor Pro (738909003104) DVD±RW Burner Logo

91 people viewed this question

Ask a Question

Usually answered in minutes!

Top Micro Solutions CD & DVD Burners Experts


Level 3 Expert

61129 Answers


Level 3 Expert

5660 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you a Micro Solutions CD and DVD Burner Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides