Question about Samsung HLM507W 50" Rear Projection HDTV

1 Answer

I have a samsung dlp rear projection tv, when i turn it on the audio is on but no picture and there is a blinking green light on under the lamp icon on the front of the tv

Posted by on

  • 2 more comments 
  • Anonymous Dec 30, 2008

    tv turns itself off after about 30seconds of being on then the lamp light &other 2 lights begin to blink for hours. this continues to happen even after being un plugged.

  • nitai52402 Feb 04, 2009

    I have the same issue too.After a while the lamp light is red. When the TV turns on, there is sound but no display at all.

  • johnjeannie Mar 29, 2009

    no pics audio works fans on ,bulb is lit up, took color wheel apart spins freely & did not hear any noise any ideas

  • franman9 May 11, 2009

    my tv is doing something very similiar. i can watch it for about an hour to andhour and a half and then it shuts down and all three lights blink. Then all i have to do is unplug it and immediately plug it back in and i get an additional hour to hour and a half of watch time and so on and so on. any help would be appreciated. please

×

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 76 Answers

I just checked my manual and it says to clean all the vents int he back. Sounds like it is an over heating problem. Use the vacume and clear all the vents on the back.
Thank you

Posted on Jul 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

TV lamp has been replaced, still won't come on, no picture. When turned on, I can see a blue, kind of sparking light and noise starts and does this about three times. TV powers down and does this again....


Samsung DLP TV Repair - No Picture - Replacing ...

? 2:41
https://www.youtube.com/watch?v=pBTgk_C5FVU
Jun 11, 2012 - Uploaded by ShopJimmy.com
DLP TV Repair No Picture Bad Lamp Bad Bulb TV Won't Turn On DIY Samsung DLP TV Repair How to replace Faulty LampTutorial Click Here to ... Rating is available when the video has been rented. ... is a replacement for the following DLP Rear Projection TV models: ... SAMSUNG HLR6167WX/XAA

Samsung DLP problems - Help! - ecoustics.com

www.ecoustics.com > ... > Home Video Forum > Projection TV Forum
Oct 26, 2009 - I have attached a picture of to show where the "Light Tunnel" is located. Upload ... So now I have a Samsung HLN5065W/XAA that I am willing to part out or sell as is. ... I replaced the ballast but the TV still won't turn on. .... The lamp has been sitting on a shelf until two weeks ago, when the TV went dark. Samsung DLP Light Ballast
Apr 10, 2009
Archive through October 26, 2009 - Samsung DLP problems ...
Apr 8, 2009
Samsung DLP Flashing Standby light
Jul 1, 2006
More results from www.ecoustics.com

Jan 19, 2016 | Samsung SELECT HLR6167WX/XAA Rear...

2 Answers

Power button blinks green about 1 minute then goes red


There is an additional problem,

if the bulb had been replaced by a technician, call them back and ask for additional support, since they did not fix the problem.

Oct 15, 2008 | Panasonic PT-50LC14 50" Rear Projection...

1 Answer

Samsung dlp tv wont turn on, blinks lamp light green and temp light red


These blinks of LEDs are fault indications. If you wish to get more details about these blinking codes, check this link. The details are there. It is very difficult to include all those details in tables here by this window.

Feb 03, 2013 | Samsung HLN467W 46" Rear Projection HDTV

1 Answer

Turn on tv...green lamp blinks several times.lights up but no picture...press any remote button timer in green blinks...tv turns off and goes to standby


The tv "LAMP"LED light indication flashes or stay lit?The tv projection lamp been in this tv like 1/2 or 2 years?Tv been on and used like 4 or 5 hours a day?Yes,than the tv projection lamp life are over.Require a new tv projection lamp.

Nov 17, 2010 | Samsung HLP4674W 46" Rear Projection HDTV

1 Answer

Cable hooked up right...turned on this morning sound no pic


Ur tv been in use at least 1 1/2 or 2 years.On about 4 or 5 hours a day on this tv?The LED light indicator "LAMP" flashes?The projection bulb life is over.Require a new bulb.

May 27, 2010 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

Tv comes on and picture and audio go out in about 5 minutes lights blinks lamp timer Could it be lamp or balast and can both me changed by owner


Hello: This is an indication of a bad of faulty lamp. If it has been at least two years since you have purchased the unit, then replace the lamp, first as this is main fault of DLP Televisions.

Dec 04, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

Sound but no picture - won't stay on


you may check your lamp first. other than that i would say a faulty mains board.

Apr 16, 2009 | Samsung DLP HL-P4663W 46" Rear Projection...

1 Answer

Samsung 61" DLP 3 Blinking lights.


all 3 lights blinking means lamp has a fault the service manual says replace the lamp. If you need the service training manual for that model let me know and I will post the link as the training manual has excellent trouble shooting breakdowns for that model DLP

Mar 26, 2008 | Samsung HLN617W 61" Rear Projection HDTV

2 Answers

Sharp DLP No picture


i have a 56DR650 and it does them same thing. It is still under warranty but where i bought it, they said they can no longer fix it so they are giving my money back. the problem has to do with the color wheel inside.

Oct 31, 2007 | Sharp 56DR650 56" Rear Projection HDTV

Not finding what you are looking for?

Open Questions:

0 Answers

Samsung HLM507W will not turn on Alright so here's the deal....I got this TV for free from a guy on craigslist. He said he couldnt get it to turn on. He replaced the lamp, it still didn't work, so he gave up and now I have it. First thing I did was try and turn it on... The TV powered up for about 5 seconds, and then the screen started to flicker all kinds of crazy colors, and it shutdown shortly after with all 3 lights blinking. I figured this probably has to do with the color wheel, so I bought a new one and popped it in. Once installed, the TV started right up, and worked for the entire duration of it being on (approx 7 hours). Now it will not turn on. Here's the startup sequence: -Push power -A couple of audible clicks, and both cooling fans energize. -Lamp does not turn on, and after about 45 seconds of having just the fans running, the TV cycles off and tries to power itself back on. -Rinse and repeat about 3 times total. -After the 3rd attempt, the TV shuts down completely and all 3 lights start blinking in front. -Pushing power does not do anything with the 3 lights blinking. TV must be unplugged and pplugged back in before sequence can be attempted again. Looking for a possible solution/troubleshoot technique. Checked the fuses and they are fine, triple checked all of the connections. Seeing as the lamp doesnt even attempt to energize, Im thinking it could be the ballast, but I'm trying not to dump money into something that might not fix the problem. Thanks for your help!

Jan 21, 2013 | Samsung HLM507W 50" Rear Projection HDTV

Samsung HLM507W 50" Rear Projection HDTV Logo

64 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Projection Televisions Experts

The Wyzzyrd

Level 2 Expert

83 Answers

Donald Griswold
Donald Griswold

Level 1 Expert

8 Answers

Jaime Hernandez

Level 3 Expert

2267 Answers

Are you a Samsung Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...